Honeywell RTH2310 Support Question
Honeywell RTH2310 Support Question
Find answers below for this question about Honeywell RTH2310.Need a Honeywell RTH2310 manual? We have 1 online manual for this item!
Question posted by hlancaster on October 30th, 2011
Trane Heatpump Does Not Come On. Settings Per Manual And Nothing Happens.
The person who posted this question about this Honeywell product did not include a detailed explanation. Please use the "Request More Information" button to the right if more details would help you to answer this question.
Current Answers
Related Honeywell RTH2310 Manual Pages
Owner's Manual - Page 1
Quick Installation Guide
RTH2310
Programmable Thermostat 69-2214EF-02
Owner's Manual - Page 2
... instructions in the following pages.
Identify your system type. Remove your old thermostat. Identify the wires. Mount the new wallplate. Connect the wires...furnace type. Install the batteries. Install the thermostat. Set the system. Do you need assistance? We are here to help. Quick Installation Guide
Installation is Easy...
Owner's Manual - Page 3
... are not sure of your system type or if you have any other questions, call us toll-free at 1-800-468-1502. RTH2310 Programmable Thermostat
Identify System Type
1.
This thermostat is compatible with the following systems:
• Gas, oil or electric furnace • Central air conditioner • a hot water system with heat...
Owner's Manual - Page 4
... power off at the heating/cooling system.
2) Remove old thermostat, but leave wallplate with wires attached. MERCURY NOTICE: Do not put your local waste management authority for instructions regarding recycling and proper disposal.
3
Contact your old thermostat in the trash if it contains mercury in a sealed tube. Do not remove wallplate yet...
Owner's Manual - Page 5
... attached to a terminal marked C or C1, they will not be connected to your new thermostat. Wrap the wires around a pencil to identify wires. RTH2310 Programmable Thermostat
Identify Wires
3.
If any wires are not attached to your old thermostat or are labeled. Do not use non-connected wires.
Do not use C or C1 wires...
Owner's Manual - Page 6
Pass wires through opening of wallplate and secure wallplate to the wall using provided screws.
5 Quick Installation Guide
Mount New Wallplate
4.
1) Remove coverplate.
2) Loosen screw (the screw remains captive on wallplate).
3) Remove thermostat.
4) Mark and drill appropriate mounting holes (or use existing holes). Insert plastic anchors.
Owner's Manual - Page 7
... with the terminal having the same letter.
2) Loosen the terminal screws using a screwdriver, insert the wires, then tighten the screws.
3) Push any terminal on the thermostat, see next page.
6 RTH2310 Programmable Thermostat
Connect Wires (typical wiring) 5.
Labels don't match?
Owner's Manual - Page 9
RTH2310 Programmable Thermostat
Specify Furnace Type
6.
J2 jumper
HG Leave the jumper in this position if you have an electric furnace.
8 Set the Jumper J2, on the back of the thermostat, if you have connected a wire to this factory-set position if you have a gas or oil furnace. HE Place the jumper to the G terminal.
Owner's Manual - Page 10
... setpoint is normal that the displayed temperature be higher than the ambient temperature if you are installed, the thermostat performs a series of tests for approximately 5 seconds. After the batteries are holding the thermostat. The thermostat will hear a clicking
sound. Quick Installation Guide
Install Batteries
7.
1) Pull out the battery cover. 2) Install the batteries...
Owner's Manual - Page 11
RTH2310 Programmable Thermostat
Install thermostat
8.
1) Mount the thermostat on the wallplate.
2) Tighten the screw and install the coverplate.
3) Turn power back on at the heating/cooling system.
10
Owner's Manual - Page 12
...;C or °F
Time display
12 h or 24 h
Early Start 2
On or Off
Heating cycles per hour 3
2, 3, 4, 5 or 6 4
Cooling cycles per hour 3
2, 3, 4, 5 or 6 5
1 Default settings are shown in bold and underlined.
2 See page 3 of Operating Manual.
3 Use the system switch to the next function, briefly press both and buttons simultaneously.
3) To change the...
Owner's Manual - Page 13
Guide d'installation rapide
RTH2310
Thermostat programmable 69-2214EF-02
Similar Questions
How Do I Go Clear The Setting On My Thermostat?
How do I set my Honeywell TH4210D1005 thermostat back to factory settings? Every time I go from heat...
How do I set my Honeywell TH4210D1005 thermostat back to factory settings? Every time I go from heat...
(Posted by mks901 2 years ago)
Advanced Settings On This Thermostat
How do I find the codes for advanced settings on this thermostat?
How do I find the codes for advanced settings on this thermostat?
(Posted by nanaanna 6 years ago)
How Much Is Trane Thermostat T8624d2046 By Honeywell?
(Posted by TawniBraden 11 years ago)
