Hitachi NV65AH Support Question
Hitachi NV65AH Support Question
Find answers below for this question about Hitachi NV65AH - Pneumatic Coil Siding Nailer Wire/Plastic Collation.Need a Hitachi NV65AH manual? We have 1 online manual for this item!
Question posted by robdaves on August 4th, 2012
Hitachi Av65ah Jams
With wire-collated stainless steel siding nails my nailer jams constantly (every 5-10 nails). What is the remedy?
Current Answers
Related Hitachi NV65AH Manual Pages
Instruction Manual - Page 3
... damage are identified by DANGERS and WARNINGS on the Nailer and in this Manual. English
IMPORTANT INFORMATION
Read and understand tool labels and all of this Manual and in the ...NOTE emphasizes essential information.
- 3 - Hazards that result from the operation and maintenance of Nailers are outlined in the "SAFETY" section of the operating instructions, safety precautions and warnings ...
Instruction Manual - Page 4
... in work area. 2. NEVER POINT TOOL AT YOURSELF OR OTHERS IN WORK AREA. Never connect the Nailer to pressure which potentially exceeds 200 psi (13.7 bar 14 kgf/cm2) as a power source for the Nailer. Always wear ear protection to protect your ears from the front and side. EXPLOSION MAY OCCUR. Never use of...
Instruction Manual - Page 5
...DUE TO RECOIL. Avoid the risk of unnecessary tools, debris, furniture, etc.
10. NEVER CARRY NAILER BY HOSE.
24. DO NOT DISCONNECT AIR HOSE FROM NAILER WITH FINGER ON TRIGGER. When loading fasteners ... SIDES OF A WALL AT THE SAME TIME. CHECK FOR LIVE WIRES. Lock the storage area.
9. Never use , the Nailer should be able to ensure there are missing or damaged.
16. The Nailer and...
Instruction Manual - Page 6
...HITACHI. Unauthorized parts, accessories, or fasteners may result. Fragments of EYE PROTECTOR by you if you are tired. WHEN YOU DETACH AND ATTACH A HOSE CAP, DISCONNECT AIR HOSE FROM NAILER. Keep Nailers in use of wire collating... a nailer. Ensure that a nail may cause it to clear a jam or repair the Nailer unless you are doing maintenance and inspection; 2) clearing a jam; 3)...
Instruction Manual - Page 7
...
Push Lever
Feeder Dust Cover
Firing Head (Outlet)
Magazine Stopper
Magazine Assembly
Nail Holder
Magazine Cover
Section A-A
Nail Stopper (A)
Nail Guide
Feeder
Feed Piston Feed Spring
- 7 - Some illustrations in the safe operation of the Nailer.
English
OPERATION
NOTE: The information contained in this Manual is designed to assist you in this Manual may show...
Instruction Manual - Page 8
... can be driven with this Nailer.
Wire-collated coil nails
Min.
.209" (5.3 mm)
Max.
.252" (6.4 mm)
1-1/2" (38 mm) 2-1/2" (64 mm)
Sheet-collated coil nails
.090" (2.3 mm)
.099" (2.5 mm)
ACCESSORIES
WARNING
ⅷ Accessories other than those shown below can lead to assure nail quality and driving ease. NOTE: Use only genuine Hitachi nails to malfunction and resulting injuries...
Instruction Manual - Page 9
...Nailer must have a minimum working pressure rating of 150 psi (10.4 bar 10...Siding, fencing, decking ⅜ Wall and roof sheathing ⅜ Mobile home and modular housing construction ⅜ Crate and pallet construction
NOTE: .099" × 2-1/2" (2.5 mm × 64 mm) nails cannot be driven in compressed air. Make sure of the nails first to this Nailer...Nailer.
Use Hitachi pneumatic tool...
Instruction Manual - Page 10
... free-fire (blank-fire) the Nailer.
REMOVE ALL NAILS FROM NAILER.
Ⅺ ALL SCREWS MUST BE TIGHTENED. Trigger
Push Lever
Do not connect air hose
- 10 - Keep the lubricator filled with side shields which conforms to warm up the moving part. The lowered air pressure will wear prematurely. ⅜ Use Hitachi pneumatic tool lubricant.
If abnormal operation occurs...
Instruction Manual - Page 11
... degrees clockwise until you may load nails in the actual application.
Ⅺ THE NAILER MUST OPERATE PROPERLY. Drive nails into Nailer, 1) do not pull trigger; 2) do the job. Magazine Stopper
Nail Holder
(2) Adjust the position of the nails being used in the Nailer. Pull the trigger.
Ⅺ THE NAILER MUST OPERATE.
(5) With the Nailer off the trigger, depress the...
Instruction Manual - Page 12
... knob down and swing the nail guide open.
Nailer at yourself or others in work area MUST wear safety glasses with side shields which conforms to disengage the nails with finger. If the magazine cover is important. Magazine Opening
Pawl
Feeder
2 Guide Surface
NOTE: Be careful not to deform the collated wires and
not to ANSI...
Instruction Manual - Page 13
.... Nails can be driven, possibly causing injury.
ⅷ Some types of loaded nails can be driven into the air plug on the opposite side.
ⅷ Never use Nailer which... 1. If dropped, the collated nails may reduce the possibility of
Hitachi pneumatic tool lubricant into and through or away from workpiece and hit someone.
ⅷ Never drive nails from the Nailer; 2) remove all warnings ...
Instruction Manual - Page 14
...HOSE FROM NAILER. 2 Put the nose cap to the Nailer remains constant
(regulator is installed and working properly), and 2) the Nailer is reached ...collated nails.
2 If nails are driven too deep, turn the adjuster to the deep side. ALWAYS WEAR EYE PROTECTOR. Perform a nailing test.
5 DISCONNECT AIR HOSE FROM NAILER. 6 Choose a suitable position for a nailing test.
4 Connect the air hose. If nails...
Instruction Manual - Page 15
...
5 Cut the deformed collated wire with Hitachi pneumatic tool lubricant.
English
MAINTENANCE
NOTE: The information contained in this Manual may show details or attachments that nail stopper (A) and nail stopper (B) slide smoothly by pusing them with finger. MAINTENANCE AND INSPECTION
Read section titled "SAFETY" (pages 4 - 6).
Clearing a jam
Remove a jammed nail in the following order...
Instruction Manual - Page 16
... or replacement of parts because of HITACHI. Warning Label
7. SERVICE AND REPAIRS
WARNING
ⅷ Only service personnel trained by Hitachi, distributor or employer shall repair the Nailer.
ⅷ Use only parts supplied or recommended by Hitachi for an extended period, apply a thin coat of the lubricant to the steel parts to change without any obligation...
Instruction Manual - Page 17
... lubricator filled. Prevent clogging of lubricant into the Nailer. CORRECTION Clear a jam per page 15.
Blow clean daily. Supply 2 - 3 drops of filter with Hitachi pneumatic tool lubricant. Reduce air pressure. (Adjust 70 - 120 psi) Use only recommended nails. Driver blade worn? Follow manufacturer's instructions. Check function of nail feeder per page 11. Keep push lever...
Instruction Manual - Page 51
...
39 880-175 Adjuster Spring
2
40 959-148 Steel Ball
D3. 175 2
41 880-333 Pushing Lever (A)
1
42 880-081 Washer
1
43 949-657 Hex.
Bolt M4×10 1
501A 875-769 Eye Protector
1
502 944-...the part of the HITACHI due to improvements.
- 51 - Code
No. Socket Hd.
Item No. Bolt
M4×6 1
91 880-319 Shaft Ring
2
92 880-658 Nail Guide Shaft
1
93 882-678 Nail Guide
1
94 ...
Instruction Manual - Page 52
Norcross, GA 30093
Hitachi Koki Canada Co.
6395 Kestrel Road Mississauga ON L5T 1Z5
305 Code No. Shinagawa Intercity Tower A, 15-1, Konan 2-chome, Minato-ku, Tokyo 108-6020, Japan
Distributed by
Hitachi Koki Co., Ltd. Issued by
Hitachi Koki U.S.A., Ltd.
3950 Steve Reynolds Blvd.
C99086765 N Printed in Japan
Similar Questions
How Do You Install A Sequential Fire Mechanism In A Hitachi Nv65ah Nailer
(Posted by Anonymous-170890 2 years ago)
Shoot One Nail Piston Shaft Will Not Go Back Up
(Posted by banubasdeo2 2 years ago)
Nail Striker Pin Jams
The striker pin get stuck in front of the nails. I have to push it back with a small screw driver. T...
The striker pin get stuck in front of the nails. I have to push it back with a small screw driver. T...
(Posted by caseyrealtytrust 6 years ago)
I Have An Hitachi 45ae Coil Roofing Nailer That Has Begun To Leak Continuously
thru the exhaust port. Can you help me solve this problem. The equipment is less than a year old and...
thru the exhaust port. Can you help me solve this problem. The equipment is less than a year old and...
(Posted by jmartell83837 9 years ago)
Removing A Jammed Nail In The Shaft Of The Gun
(Posted by Anonymous-64090 11 years ago)