Hitachi CPX260 Support Question
Hitachi CPX260 Support Question
Find answers below for this question about Hitachi CPX260 - LCD XGA Projector.Need a Hitachi CPX260 manual? We have 1 online manual for this item!
Question posted by spech on April 13th, 2012
Lamp Replacement Issue
The lamp replacement light began flashing on our Hitachi CP-X260, and we purchased an off-brand replacement bulb from a provider we have used in the past. The new bulb was installed and seated well, with all screws tightened, but still no light from the projector and a flashing red lamp light continues. We attempted to put back the old bulb (which still worked but had dimmed) but had no light or change with the old bulb either. We can order a new bulb bot are not optimistic since the old (but still functioning) bulb does not work either.
Current Answers
Related Hitachi CPX260 Manual Pages
Technical Manual - Page 1
...(75Hz)
85.1
VESA
SVGA (85Hz)
74.5
Mac 16" mode
60.0
VESA
XGA (60Hz)
70.1
VESA
XGA (70Hz)
75.0
VESA
XGA (75Hz)
85.0
VESA
XGA (85Hz)
75.0
VESA 1152 x 864 (75Hz)
60.0
VESA 1280 x 960 ...will not be possible with resolution up to the projector's panel resolution before being displayed. Projector
CP-X260
User's Manual - Use of some of these modes will be achieved if the resolutions of ...
Technical Manual - Page 2
...75Hz) 3 21 600 1
SVGA (85Hz) 3 27 600 1
Mac 16" mode 3 39 624 1
XGA (60Hz) 6 29 768 3
XGA (70Hz) 6 29 768 3
XGA (75Hz) 3 28 768 1
XGA (85Hz) 3 36 768 1
1152 x 864 (75Hz)
3
32 864 1
1280 x 960 (60Hz)... may be different. The signal timing of computer signal
Initial set signals
The following signals are used for the initial settings.
Sync. In such case, adjust the items V POSITION and H...
Technical Manual - Page 6
... the computer on, and after the computer has started up turn the projector on. Header BE + EF + 03 + 06 + 00 + CRC_low + CRC_high CRC_low : Lower byte of CRC flag for command data CRC_high : Upper byte of header (7 bytes) + command data (6 bytes).
2.
Use the cable that fulfills the specification shown in the previous page...
Technical Manual - Page 7
... undefined command or data. • Provide an interval of at least 40ms between the response code and any other code. • The projector outputs test data when the power supply is switched ON, and when the lamp is greater than indicated by the data length code, the projector ignore the excess data code.
Ignore...
Technical Manual - Page 8
... 00 00 00
01 00
02 00
(Cover error)
(Fan error)
05 00
06 00
(Air flow error) (Lamp time error)
09 00
10 00
(Filter missing error)(Inner Sencer error)
03 00 (Lamp error)
07 00 (Cool error)
BE EF 03 06 00 89 D2 02 00 03 20
BE EF...
Technical Manual - Page 14
... Set
START UP
Set
My Screen LOCK Set
MESSAGE
Set
AUTO SEARCH Set
AUTO ON
Set
AUTO KEYSTONE EXECUTE
AUTO KEYSTONE Set
AUTO POWER OFF
LAMP TIME LAMP TIME Reset
FILTER TIME FILER TIME Reset
MAGNIFY
FREEZE
Set
My Screen ORIGINAL
BLUE WHITE BLACK Get TURN OFF TURN ON Get My Screen...
Similar Questions
Can A Universal Power Cord Be Used With The Hitachi Cpx5 Xga Projector?
(Posted by jburniemurphy 9 years ago)
Filter Reset
I have a Hitachi ED-a100 3LCD projector and I need to reset the filter timer. The unit will only sta...
I have a Hitachi ED-a100 3LCD projector and I need to reset the filter timer. The unit will only sta...
(Posted by sburdulis 10 years ago)
Restart After Lamp Replacement
After replacing lamp, we are unable to turn projector on and get it to light up. The Power and Lamp ...
After replacing lamp, we are unable to turn projector on and get it to light up. The Power and Lamp ...
(Posted by wkosafety 11 years ago)
Bulb Is Very Dim
Bulb got dim before burning out.Replaced the bulb after it went out but brightness is very low. Repl...
Bulb got dim before burning out.Replaced the bulb after it went out but brightness is very low. Repl...
(Posted by ragripper 11 years ago)
Unit Keeps Shutting Off.
My Hitachi CPX5 XGA projector keeps shutting off is it a power supply issue. It runs for a short tim...
My Hitachi CPX5 XGA projector keeps shutting off is it a power supply issue. It runs for a short tim...
(Posted by lmorat 13 years ago)