Frigidaire atf7000fe Support Question
Frigidaire atf7000fe Support Question
Find answers below for this question about Frigidaire atf7000fe - Affinity 3.5 Cu. Ft. Front Load Washer.Need a Frigidaire atf7000fe manual? We have 3 online manuals for this item!
Question posted by kathleen43393 on July 11th, 2014
What Are The Dimensions Of My Frigidaire Washer Model # Atf7000fso
The person who posted this question about this Frigidaire product did not include a detailed explanation. Please use the "Request More Information" button to the right if more details would help you to answer this question.
Current Answers
Answer #1: Posted by BusterDoogen on July 11th, 2014 5:06 PM
BusterDoogen
Member since:
October 30th, 2011 Points: 28,565,407
Member since:
October 30th, 2011 Points: 28,565,407
Width: 27" Height: 36" Depth (Not Including Hose): 27" Unit Weight/Gross Weight:
205 / 220 Lbs.
I hope this is helpful to you!
Please respond to my effort to provide you with the best possible solution by using the "Acceptable Solution" and/or the "Helpful" buttons when the answer has proven to be helpful. Please feel free to submit further info for your question, if a solution was not provided. I appreciate the opportunity to serve you!
Related Frigidaire atf7000fe Manual Pages
Use and Care Guide - Page 2
... department. Installation and service must be handed over to prevent property damage, personal injury or loss of life. - Your washer may occur.
This book
Model Number
contains valuable information about recycling
of others . WASHER SAFETY
Your safety and the safety of this product, please contact your local city office, your safety, the information...
Use and Care Guide - Page 3
...kerosene, cooking oils, waxes, etc. Do not combine laundry products for such a period, before using the washer, turn on top of this washer. You can be plugged into a
properly grounded and ... cleaned in, soaked in serious
injury or death.
- Installation instructions are packed in 1 load unless specified on or near children. Failure to play . Avoid fire hazard or electrical shock...
Use and Care Guide - Page 4
... objects which attract lint. This also helps protect other loads and cause skin irritation.
2. See Stain Removal for operating your specific model. • Always read Important Safety Instructions before attempting ...• To prevent injury, do not reach into the washer while parts are moving. Add laundry load to help balance the load. • Single heavy items such as a sweater, ...
Use and Care Guide - Page 5
.... • Add a low-sudsing, high-efficiency detergent made for front-loading washers to the mininum fill line (MIN.)for large loads. Do not exceed the maximum fill line. OPENING AND CLOSING THE DISPENSER DRAWER • Slowly open the dispenser drawer. • After adding laundry products, slowly close the dispenser drawer. Note: From time to...
Use and Care Guide - Page 6
... stains. • Check care label instructions for treatments to avoid on top of each load. As an ENERGY STAR ® Partner, Electrolux Home Products has determined that could entice children to the washer. • DO NOT leave the washer door open door could ignite or explode. • Never use highly flammable solvents, such...
Use and Care Guide - Page 7
... water safe for fabric.
Wash using bleach safe for fabric. For heavy stains and tar, apply nonflammable dry cleaning fluid to back of an entire load, use rust remover safe for fabric. Replace towels under stain frequently. Rinse thoroughly. Some inks may be removed. Use prewash stain remover, denatured alcohol or...
Use and Care Guide - Page 8
.... Increase detergent. It may intensify discoloration.
•Use nonprecipitating water softener. •Before washing, run hot water for sorting and preparing the wash load.
•Do not overload washer. •Use correct temperature and amount of detergent.
•Add nonprecipitating water conditioner to wash water to remove detergent residue.
•Add liquid...
Use and Care Guide - Page 9
... and fill the bleach dispenser compartment to remove lint and other items in place. Do not add wash load.
9
ENGLISH Care and Cleaning
TO REFRESH OR CLEAN INSIDE OF THE WASHER: IMPORTANT: Do not load garments or other debris. • The plastic drum vanes may indicate improper dilution or more frequent cleaning is...
Use and Care Guide - Page 10
....
Adjust leveling legs and tighten lock nuts. If problem is being used elsewhere in folds of up to prevent siphoning. Washer won't spin. Add 1 or 2 similar items to help balance the load.
• Load is overheated.
Oversudsing. Water pressure must be at the end of balance. Measure hot water temperature at least 30...
Installation Instructions - Page 1
Leave these instructions. Contents
SUBJECT
Pre-Installation Requirements Electrical Requirements Grounding Requirements Water Supply Requirements Drain Requirements Rough-In Dimensions Location Of Your Washer Unpacking Installation Replacement Parts
PAGE
2 2 2 2 2 3 4 4-5 5-6 6
Installation and service must be followed to minimize the risk of fire or explosion or to prevent property damage, ...
Installation Instructions - Page 2
...power supply cord. Water pressure MUST be installed within 42 inches (107 cm) of your washer's water inlet. Drain capable of potential inconsistent voltage capabilities, the use hose P/N 134889610,... so the power supply cord is properly grounded.
1. Properly grounded 3-prong receptacle to the washer can advise you are in accordance with a licensed electrician if you of local codes, with...
Installation Instructions - Page 3
23¾" (60.33)
ROUGH-IN DIMENSIONS
24" (60.96)
SIDE
25/8 " (6.67)
22" (55.88)
255/8 "
(65.09)
35/8" (9.21)
inches (cm)
281/4" (71.76)
NOTE: For pedestal installations, see additional ...
Installation Instructions - Page 4
... bottom. To ensure vibration or movement does not occur, reinforcement of 1/2 in.
The ambient temperature should never be below 60 ° F
(15.6 ° C) for proper washer (detergent breakdown) operation.
2. UNPACKING
1. In an area where it 's back.
3. Remove the carton.
2. IMPORTANT MINIMUM INSTALLATION CLEARANCES When installed in alcove or closet:
Sides, Rear...
Installation Instructions - Page 5
... screens.
2. Remove: metal "P" clamp
4 shipping bolts, 4 spacers. Adjust the leveling legs so the washer is level front-to-rear and side-to-side, and stable corner-to an upright position.
5. Do ....
4. Remove the following from the plastic bag located in the drum of the washer and install the rubber washers in the holes vacated by hand, then tighten another 2/3 turn with the pedestal. ...
Installation Instructions - Page 6
... to ensure the power is unpacked. Pedestal A pedestal accessory,Model No.
Place all the Safety and Operating instructions are not meant ...achieved when all materials in your washer, call 1-800-944-9044, or visit our website, www.frigidaire.com, for service.
12. Place... to the standpipe, inlet hose, laundry tub, etc.
Cartons covered with the washer. so the hose does not pull out...
Data Sheet - Page 1
...LEDs will flash. The drain pump & door lock solenoid will activate and the washer will deactivate and the loading door can be opened.
TO START THE TEST: • Turn the Program ...7 clicks from the start position. Turn the program knob (2) clicks from the start position. The washer will signal the last error code. The control will turn on the pages 3-5. Turn the program...
Data Sheet - Page 3
... correct the problem? Correct water leak. No. Correct problem. Replace the control board. 120 VAC. Yes. No. Remove power from washer.
Better models, replace the pressure sensor.
8. Remove power from the washer.
Have customer correct pressure problem. Yes. Go to step (4). Replace the pressure switch. Zero. Defective wiring. Good wiring. Replace the...
Data Sheet - Page 4
... the motor. If the problem is between 105 & 130 Ohms, replace the motor. If the readings are correct, replace the speed control board. Is the loading door closed?
2. Go the step (2). 0 volts. Shorted or open when the heater terminals are incorrect, replace the motor. Check the tub bearings. Replace the motor...
Similar Questions
My Washer Is Showing Me The Code E20. The Clothing Is Wet.
(Posted by evawojnowskyj 8 years ago)
What Is The Capacity Of Washer In Cu.ft
(Posted by Anonymous-150685 9 years ago)
What Is The Cu Ft Size Of My Washer
i am tying o find out the cu ft size of my washer dryer
i am tying o find out the cu ft size of my washer dryer
(Posted by kookiaz2 9 years ago)
Why Won't It Start?
(Posted by SCOTTDEMITRI26 9 years ago)
