Frigidaire ATF8000FS Support Question
Frigidaire ATF8000FS Support Question
Find answers below for this question about Frigidaire ATF8000FS - Gallery - Washer.Need a Frigidaire ATF8000FS manual? We have 5 online manuals for this item!
Question posted by Dcvincent228 on May 16th, 2015
My Washer Paused At The Final Spin Cycle. Cancels And Restarted A Spin Only Cycl
washer stopped at the final spin. Cancelled and restarted a spin only cycle and it immediately paused. What's happening
Current Answers
Answer #1: Posted by BusterDoogen on May 16th, 2015 1:18 PM
BusterDoogen
Member since:
October 30th, 2011 Points: 28,565,407
Member since:
October 30th, 2011 Points: 28,565,407
Go here for possible part failures associated with the spin stop issue & repair guidance.
I hope this is helpful to you!
Please respond to my effort to provide you with the best possible solution by using the "Acceptable Solution" and/or the "Helpful" buttons when the answer has proven to be helpful. Please feel free to submit further info for your question, if a solution was not provided. I appreciate the opportunity to serve you!
.
Related Frigidaire ATF8000FS Manual Pages
Use and Care Guide - Page 2
...Care Guide the washer serial plate located at the top, inside of the door and the Operating Instructions included with your appliance. These words mean:
DANGER You can happen if the ...model and serial numbers of your household waste disposal service or the shop where you don't immediately follow instructions. We have every feature Record Your Model and Serial Numbers included here. opening....
Use and Care Guide - Page 3
...washer will release any user maintenance. This will automatically restart after the washer is used for such a period, before using laundry products. Protect Children • Do not allow the drum to coast to a complete stop if it will stop...comply with these warnings could result in the cycle selector knob and allow children to the washer: - Do not store these warnings could ...
Use and Care Guide - Page 4
...rips and tears to prevent further damage during the wash cycle. • Turn knit items inside out to prevent pilling.
3. Sort laundry into loads that may stick to persons, read and ... sheer and loosely knit items from this way ONLY
Do not under any appliance.
Add laundry load to washer. • Combine large and small items in a mesh bag.
These mixtures can be ...
Use and Care Guide - Page 5
...; Slowly open the dispenser drawer. • After adding laundry products, slowly close the dispenser drawer. LIQUID BLEACH •...; Add a low-sudsing, high-efficiency detergent made for front-loading washers to the mininum fill line (MIN.) for large loads. Avoid mixing...dispensing ball is part of the normal operation of the cycle. Add detergent, bleach and fabric softener to the maximum...
Use and Care Guide - Page 6
...avoid on an inside seam. • Rinse and wash items after the cycle has ended.
8. Do not store or place laundry products on . As an ENERGY STAR ® Partner, Electrolux Home ...An open when DOOR LOCK light is completed. Select the cycle, temperature, spin speed, options and features according to type, size, and soil level of washer at any utensil used. • Do not combine stain ...
Use and Care Guide - Page 8
...bleach to final rinse. •Dry load in dryer. •Remove lint with lint brush or roller.
•See Washing Procedures for fabric.
•Do not overload washer. •...amount of detergent. •Wash synthetics frequently using full permanent press cycle. Wrinkling
•Overloading the washer. •Incorrect wash cycle for fabric. Soak item 1 hour.
Holes, tears, or snags...
Use and Care Guide - Page 9
...may become stained from washer after drawer has been...stops. (Figure 1) • Reach back into a properly grounded electrical outlet. 4. Never use a small brush to future loads.
Return the dispenser drawer. Remove this by pulling the drawer out until it in an upright position. 9. This prevents dye transfer to clean the recess. Select the Drain/Spin cycle. Press Pause/Cancel...
Use and Care Guide - Page 10
...Stop washer and check drum. To prevent unnecessary noise and
damage to allow proper spinning. • Drain hose is being used elsewhere in the house. Stop washer and reduce load. Stop washer and redistribute wash load. Stop washer.... If noise continues after washer is restarted, objects may be at a time.
• Drain hose is normal during the spin cycle. Call your hot water system...
Operating Instructions - Page 1
...temperatures, final spin speed, options and soil level for up to 90 minutes. It will be washed. Select Delay Start to delay the beginning of the cycle for each time that cycle is...8226; Slowly close the door and press Start/Pause to the wash drum, press Start/ Pause, open the door. • To stop the washer, press Cancel.
9. Sort laundry into loads that should be washed together.
2. ...
Operating Instructions - Page 2
... volume level or can be line dried. • Use No Spin to a No Spin selection. Control Lock To avoid having someone accidentally start or stop the cycle. Cancel Press Cancel to the type and size of cold tap water. Cycle Settings
Appropriate wash and rinse water temperatures, final spin speed and soil level settings for 10 seconds until "LOC...
Operating Instructions - Page 3
... Warm/Warm
Auto Temp Cold/Cold
*
*
Tap Cold/Cold Spin Speed
Maximum
*
*
*
*
Fast
*
Medium
*
Slow
*
No Spin Soil Level
Heavy Soil
Normal Soil
*
*
*
*
*
*
Light Soil Options & Features
Stain Clean
Extra Rinse
Extended Spin
Signal
*
*
*
*
*
*
*
Delay Start
* Factory Settings Available settings ** Estimated cycle duration is based on factory settings and does not...
Parts Catalog - Page 5
...134364900 134550600 131800405 134372000 134601625 131843146
DESCRIPTION Hose, water inlet, 4 ft., hose & washer Screw, pan head, 8-18B x 0.31 Control Board, motor Wiring Harness, motor...panel, reinforcement Bracket, RS panel, reinforcement Retainer, spring steel Panel, work top, black Screw, hex washer head, M5 0.8 x 15 Bracket, hinge, reinforcement Panel, service access, rear Panel, cabinet front,...
Parts Catalog - Page 7
...hex, 1/4-20 UNC-2B, (2) Washer, Bellville, spring steel Plate, counterweight Shell, tub, front Spring Assy, suspension Screw, hex head, 6.5 x 51 mm Drum Assy, spin basket Vane Kit, drum Screw, 10...mount Bracket, drain hose mtg, rear Hanger, drain hose Element, heating, 1000 W Bracket, heating element Stop, detente, heating element Receptacle, lamp, door light Lamp, G4 light bulb, 5 W, 12 V Diffuser,...
Installation Instructions - Page 1
... vicinity of this manual must be followed to minimize the risk of all occupants. · Immediately call the fire department. Follow the gas suppliers instructions. · If you cannot reach your... your building. · Clear the room, building or area of fire or explosion or to the washer must be performed by a qualified installer, service agency or the gas supplier. P/N 134965600 (0708)...
Installation Instructions - Page 2
...appliance is
absence of least resistance for Installation: 1. For higher standpipe, use of this washer with power created by a path of local codes, with a properly grounded three prong ... REQUIREMENTS
1.
In the event of malfunction or breakdown, grounding will reduce the risk of your washer is equipped with a licensed electrician if you of eliminating 17 gals (64.3 L) per square...
Installation Instructions - Page 5
.... Carefully connect the other inlet hose to within 4 feet (122cm) of the washer. Remove the 4 plugs from the hot and cold faucets to -corner.
Adjust the appropriate leg so the washer is SOLID on the floor on top of the final location.
6. Run some water from the literature pack located in the drum...
Installation Instructions - Page 6
Read the Operating Instructions and Owner's Guide provided with the cable tie (provided in the enclosure package) to the standpipe, inlet hose, laundry tub, etc. Run the washer through a complete cycle. Failure to use accessories certified by the manufacturer could result in an envelope attached to ensure the power is unpacked. Children might use...
Data Sheet - Page 1
... LEDs. • Within 5 seconds, press and hold the Option and Start/Pause buttons until wash cycle LEDs appear. SAFETY WARNING: If power is no error displayed and the washer momentarily starts then turns back off the LEDs. • Press Cancel again to stop the cycle and turn off :
1. Turn the program knob (7) clicks from the Start...
Data Sheet - Page 2
... Board thinks the door PTC circuit is open . Refer to test (11). Refer to test (2). E41 Control board thinks the door switch is open in spin. Replace the control board. Replace the control board. Replace control board or wire. E59 No tacho signal for 3 seconds. E82 Console control problem. E21 Water...
Data Sheet - Page 4
... water inlet valve assembly Yes. Remove the door lock assembly and measuere the resistance of the tub NTC. Disconnect the plug from the motor and spin the motor pulley. It should be approximately 14 ohms.
2. Defective door lock assembly. Go to step (4) If the readings are disconnected.
1. Replace the control board...
Similar Questions
Frigidaire Fex831fs4 Washer Stop Working!
It fill water and not working the timer keep running and drain but i won't spin or wash and i smell ...
It fill water and not working the timer keep running and drain but i won't spin or wash and i smell ...
(Posted by slk75204 11 years ago)
Washer Vibrates,shakes And Moves During Final Spin. What Is The Cause?
(Posted by stevets54 11 years ago)
Washer Model Ftwtb69rgs0 Spin Cycle Has A Horrific Nosies And Sever Vibration
(Posted by tlbabbitt 12 years ago)
