Dewalt DW735X Support Question
Dewalt DW735X Support Question
Find answers below for this question about Dewalt DW735X.Need a Dewalt DW735X manual? We have 2 online manuals for this item!
Question posted by ldelegan on January 13th, 2016
Feed Rollers
How do I go about adjusting the feed rollers on my planer?
Current Answers
Answer #1: Posted by TechSupport101 on January 13th, 2016 8:24 AM
TechSupport101
Member since:
May 24th, 2013 Points: 12,171,305
Member since:
May 24th, 2013 Points: 12,171,305
Related Dewalt DW735X Manual Pages
Instruction Manual - Page 2
...: Double insulation does not take the place of checking to see that keys and adjusting wrenches are not intended to the planer. It will draw. When using electric tools, basic safety precautions should be followed to install the proper outlet. Tools built with flammable vapors, they may result in overheating and loss of electric...
Instruction Manual - Page 3
...tools sharp and clean
for lubricating
and changing accessories.
• DISCONNECT TOOLS before servicing; The use face or dust mask
it will operate properly and perform its operation. Feed work into planer...PARTS. Before further use of eye protection equipment by the tool operator
and other repairs/adjustments with the characters "Z87.1". Additional Specific Safety Rules...
Instruction Manual - Page 4
...power has been shut off and cutter head has stopped rotating.
• ALWAYS LOCATE PLANER WITH PROPER CLEARANCE ON THE OUTFEED SIDE of the unit to prevent pinching or binding of... sanding, sawing, grinding, drilling, and other construction activities.
Allowing dust to get into your tool may contribute to the State of harmful chemicals. Class I Construction no......no load speed
grounded)...
Instruction Manual - Page 5
... overheating. A
TO ATTACH THE DEPTH ADJUSTMENT
C
CRANK HANDLE
1. F
2. All DEWALT
tools are provided on the chip ejection chute (H).
4 CAUTION: The mounting surface should not be operated only with
alternating current and never with the nameplate marking. per minute or 26 ft. When
transporting or storing the planer, use the smaller holes. NOTE: If...
Instruction Manual - Page 6
... disconnect tool from the notches on the right front of your planer, indicates the finished thickness of your material under the switch (M) for insertion of a
padlock to 1/32", etc. One rotation of dust ejection port. DEPTH ADJUSTMENT CRANK
Turning the crank clockwise lowers the cutter
head. TO USE THE MATERIAL REMOVAL GAUGE
1. The planer...
Instruction Manual - Page 7
Adjust the carriage height until the desired thickness setting aligns with the carriage at two different speeds. Fan-Assisted Chip Ejection System
Your planer is no manual carriage lock ...INDICATES.
The capacity of most vacs does not support the volume of material recommended on and feed your planer. Plane the workpiece at pre-set the turret stop (Q) for various widths of chips ...
Instruction Manual - Page 8
...is not recommended.
Twisted, Cupped and Bowed Wood
If both sides of cut and adjust the carriage to the desired height for additional information. Examine the finished cut guidelines...grain. Never attempt to modify your planer can take a deeper cut your planer to reach a desired thickness.
TO AVOID SNIPE
Feed the workpiece into the feed rollers. 3.
If you need to produce...
Instruction Manual - Page 9
... the material down the middle and plane it aside. 7.
Take the dust shroud out of the planer.
2. This will release allowing
the wood to remove the four screws in the open position (Fig.... 4. TO PLANE BOWED WOOD
The feed rollers and cutter head in the cutter head clamp are accessible and the cutter head lock lever (R) engages.
USE THE TOOL PROVIDED TO HANDLE THE KNIVES.
8
Ripping...
Instruction Manual - Page 11
... a dealer authorized to service
DEWALT products. Brush Change
U
Your planer is in the right, rear of
the unit (V). 3. If your planer becomes
overloaded and stops operating, turn tool off the
planer, let the unit sit for 2 minutes and press
the reset button (X) before
making any adjustments or removing/installing attachments
or accessories. However, with an...
Instruction Manual - Page 12
... reduce the risk of debris periodically.
Failure to avoid tripping your planer again. Check your own safety, read the tool instruction manual
before re-setting the circuit breaker and continuing to the planer and the
accessory. When servicing this tool, use with this tool could be cleaned or cleared of
injury, only DEWALT, recommended accessories...
Instruction Manual - Page 13
...tool abuse. Your tables should now fold up and carry the unit as recommended by authorized service centers or other qualified service personnel. Depress the spring-loaded bolts on the side
of the base.
Serious injury may want to use the T-wrench from your planer...and RELIABILITY, repairs, maintenance and adjustment should show on the side of the planer, install the bolts and spring ...
Instruction Manual - Page 15
...shroud. • excess oil/debris from feed rollers. • excessively twisted, cupped or bowed material. • a broken drive belt. A reduction in feed rate will reduce the load on the same...feed rate to trip.
14
NOTE: Even under normal loading conditions, other devices sharing the circuit with the planer OR use the planer on the motor and prevent breaker trips. A reduction in feed...
Parts Diagram - Page 2
Please visit www.dewaltservicenet.com for DW735X Type 1
Description
Qty Required
DUST SHROUD
1
PIN
6
LOCK WASHER
4
LEAD
1
SCREW
4
SCREW
3
COVER
1
SHAFT & GEAR
1
RETAINING RING
1
BEARING,BALL
1
BLADE
3
PLANER KNIVES
1
PIN
6
KEY
1
HARDWARE BAG
1
SCREW
24
HARDWARE BAG
1
BLADE HOLDER
3
CUTTER HEAD
1
BALL BEARING
1
BUSHING
1
RETAINING RING
1
PULLEY
1...
Parts Diagram - Page 3
Please visit www.dewaltservicenet.com for DW735X Type 1
Description
Qty Required
BALL
1
V BELT
1
SCREW
4
HANDLE
2
CHAIN
1
BRACKET
1
WASHER
1
SCREW
7
BOLT
3
SCREW
8
WHEEL ASSEMBLY
1
SCREW
38
INDICATOR
1
PIN
1
SCREW
1
BRACKET
2
SCREW
4
CORD CLAMP
1
...
Parts Diagram - Page 4
Page 3 Please visit www.dewaltservicenet.com for DW735X Type 1
Description
Qty Required
SWITCH
1
CIRCUIT BREAKER
1
LOCK WASHER
4
NUT
1
SCREW
2
MICRO SWITCH
1
CAP SCREW
2
WASHER
1
WASHER
2
SCREW
4
PLATE
2
WRENCH
1
WRENCH
1
TOP COVER
1
COVER ASSY.
1
...
Parts Diagram - Page 5
...-13 5140011-14
Parts List for current parts information. Page 4 Please visit www.dewaltservicenet.com for DW735X Type 1
Description
Qty Required
PAWL
1
PIN
1
INDICATOR
1
PLATE
1
BUSHING
4
FELT
4
REAR ROLLER
1
BRACKET
4
ROLLER
1
LEAD
1
SCALE PLATE
1
CHAIN
1
SWITCH COVER
1
SWITCH PLATE
1
SHAFT
1
WASHER
2
SPRING
2
IDLER SHAFT
1
SCREW
4
BALL BEARING...
Parts Diagram - Page 6
Parts list, pricing, and availability subject to change. All Rights Reserved. Please visit www.dewaltservicenet.com for DW735X Type 1
Description
Qty Required
WASHER
2
PLATE
1
CAP SCREW
3
SHAFT
1
CAP SCREW
4
BUSHING
2
WASHER
5
KEY
2
GEAR
1
GEAR CASE
1
GEAR
1
GEAR
1
PAWL
1
SHIM
1
SPACER
1
GEAR
1
SCREW
1
GEAR ...
Parts Diagram - Page 7
Please visit www.dewaltservicenet.com for DW735X Type 1
Description
Qty Required
SPRING
1
SPRING
1
SCALE
1
SCREW
2
SET SCREW
1
ADAPTER
1
DUST CHUTE
1
SCREW
4
PLATE
1
LOCK WASHER
2
SCREW
1
SCREW
4
BUSHING
1
CAP
1
INDICATOR
1
SCALE PLATE
1
SCREW
4
...
Parts Diagram - Page 8
Parts list, pricing, and availability subject to change.
All Rights Reserved. Please visit www.dewaltservicenet.com for DW735X Type 1
Description
Qty Required
WASHER
4
FAN HOUSING
1
RETAINING RING
1
SPRING
1
SPRING CLIP
3
SCREW
4
FAN HOUSING
1
NUT
1
WASHER
1
FAN
1
CAP
1
BALL BEARING
2
SCREW
2
FIELD
1
MOTOR CORD
1
...
Parts Diagram - Page 9
Please visit www.dewaltservicenet.com for DW735X Type 1
Description
Qty Required
NUT
4
LOCK WASHER
4
SPROCKET
4
PLATE
4
KEY
3
WARNING LABEL
1
WARNING LABEL
1
WARNING LABEL
1
WARNING LABEL
1
LABEL
1
LABEL
2
WARNING LABEL
2
WARNING LABEL
2
COPYRIGHT&#...
Similar Questions
Adjustable Length Extension Arm Stuck
the adjustment arm is stuck in the extended position. Cannot push arm back to make adjustments
the adjustment arm is stuck in the extended position. Cannot push arm back to make adjustments
(Posted by jelhodson 1 year ago)
Dewalt 734 Planer Leaves Marks On The Wood From The 8 Knife Screws
Dewalt 734 Planer leaves marks on the wood from the 8 knife screwsWe have a Dewalt 734 in our shop. ...
Dewalt 734 Planer leaves marks on the wood from the 8 knife screwsWe have a Dewalt 734 in our shop. ...
(Posted by HilbornJ42 2 years ago)
Defective Depth Adjustment
Depth adjustment does not work properly as it did when new
Depth adjustment does not work properly as it did when new
(Posted by 998hager 10 years ago)
Is The Valve On The Pump Chemical Feed Inlet An On/off Valve?
Is this a flow rate valve that always remains partially open or is it supposed to close tight?
Is this a flow rate valve that always remains partially open or is it supposed to close tight?
(Posted by gerstnert 10 years ago)