Cobra CJIC 250 Support Question
Cobra CJIC 250 Support Question
Find answers below for this question about Cobra CJIC 250.Need a Cobra CJIC 250 manual? We have 1 online manual for this item!
Current Answers
Answer #1: Posted by SonuKumar on April 24th, 2023 8:29 PM
SonuKumar
Member since:
May 9th, 2021 Points: 16,638,170
Member since:
May 9th, 2021 Points: 16,638,170
To turn on the Cobra CJIC 250 Air compressor, follow these steps:
- Make sure the compressor is properly connected to a power source.
- Turn the on/off switch to the "on" position. The switch is located on the back of the compressor.
- Adjust the pressure regulator knob to the desired pressure. This knob is located on the front of the compressor.
- Attach the air hose to the compressor and the tool or device you want to use.
- Press the trigger on the tool or device to start the air flow.
The compressor will automatically turn on and off to maintain the desired pressure setting. When the pressure in the tank drops below the set pressure, the compressor will turn on to refill the tank. When the pressure reaches the set point, the compressor will turn off again.
Please respond to my effort to provide you with the best possible solution by using the "Acceptable Solution" and/or the "Helpful" buttons when the answer has proven to be helpful.
Regards,
Sonu
Your search handyman for all e-support needs!!
Related Cobra CJIC 250 Manual Pages
CJIC250_MANL - Page 1
... our website: www.cobra.com
Nothing Comes Close to Cobra®
CJIC 250
Jump Starter/PowerPack
1
with Air Compressor
Operating Instructions
2
3
©2009 Cobra Electronics Corporation
4
Version D
Printed in China
Part No. 480-549-P
Introduction
Thank you need power for purchasing the Cobra CJIC 250 jump starter/power pack with built-in air compressor 2. 120V AC charging adapter...
CJIC250_MANL - Page 2
...Electronics Corporation™ is a trademark of the product resides outside the U.S.A. USB/LED power switch 4. Air compressor hose
compartment
Note: See page 6 - 7 for warranty service, but the return ...Electronics Corporation 6500 West Cortland Street Chicago, Illinois 60707 USA www.cobra.com
A3
Warranty and Trademark Acknowledgement
For Products Purchased in workmanship and materials for...
CJIC250_MANL - Page 3
How to Use Your
Contents
Cobra CJIC 250
Introduction A1 Our thanks to you What's included
Features of This Product
• 100W AC output for operating household appliances
Buttons, Switches & Indicators A2 Customer Assistance A3 Conventions 2
• 260 PSI air compressor
• 12 Volt DC power outlet for DC accessories & appliances
Safety Information 3 Controls and Indicators...
CJIC250_MANL - Page 4
... all sides of fire and water. WARNING: Heated surface Ensure at least 2" (5cm) air space is maintained on electrical equipment, always ensure someone is not intended for use this manual...:
WARNING Warnings identify conditions that could result in personal injury or loss of a gasoline-powered boat, or near propane tanks.
Have a qualified technician perform any service work. Any ...
CJIC250_MANL - Page 5
... tool to temperatures over the port when not in vicinity of contact with a rechargeable, sealed lead acid battery. CAUTION: Equipment damage Do not expose the power pack to simultaneously touch the positive and negative cable ends or battery terminals. Remove personal metal items such as rings, bracelets, necklaces, and watches when...
CJIC250_MANL - Page 6
... in use.
3. Introduction
Controls and Indicators:
1. Battery level indicators:
Battery Value U Flipped right, the white LED lamps illuminate. Charging indicator
2-color LED indicator. USB/LED power switch If the switch is in the unit by inserting the connector from the AC charging adapter into this LED indicator lights red, when the...
CJIC250_MANL - Page 7
... unit in the same compartment as a UPS (Uninterruptible Power Supply).
Check battery status to the AC outlets. Turn the AC socket switch ON.
4. See "recharging the power pack battery" (page 12). If, after use as batteries
or in back of the power pack.
Cool
Ambient air temperature should be less than their average rating when...
CJIC250_MANL - Page 8
... output of inflating to 260 PSI. Plug the DC appliance into the DC socket. 4.
Caution: Equipment damage The power pack with air compressor shuts off , the compressor will automatically turn OFF the compressor switch and allow the compressor to ensure the battery is exceeded, an explosion may be damaged. • Some chargers for 10 minutes after use...
CJIC250_MANL - Page 9
... valve stem. To inflate small sports equipment: 1. Double-check the air pressure with air compressor. Repeat if necessary. This may damage the compressor. To inflate your vehicle, motorcycle, or bicycle tires: 1. Press the thumb latch toward the house until it clockwise to turn the compressor OFF. 12. If an adapter is incorrectly connected to inflate small...
CJIC250_MANL - Page 10
...Charging with other stationary heavy metal part of the engine battery. 4. When not used the power pack, it starts, whichever is first. Plug AC charging adapter into charging jack on the...red and black clamps to the engine block,
cylinder head, or other jump start a vehicle: 1. Turn off the jump start a vehicle continued: 7. Disconnect the jump starting clamps from an AC source, the...
CJIC250_MANL - Page 11
... attempting to minimize its interference with a higher quality filter. The power pack's battery has Replace the power pack's
been damaged
battery (consult service
technician). not charged to 10V...Recharge the battery. AC appliance rated less than 80W, high starting surge within the power pack surge rating.
Clear warm environmental condition.
AC wall outlet. tripped.
Battery has...
CJIC250_MANL - Page 12
... (maximum continuous load) DC fuse
7Ah/12V sealed lead-acid battery 8A with automatic reset 15A
AC Power: Output power
• Continuous AC output power • Five minute AC output power • AC output surge capacity
80W 100W 400W
Output voltage
104V-125V
Output frequency
58Hz-62Hz
Output wave form
Modified sine wave
No...
Similar Questions
Cobra 2575 No Longer Turns On
I used my Cobra for years. After a long trip, it no longer powers on.
I used my Cobra for years. After a long trip, it no longer powers on.
(Posted by grigsby55 2 years ago)
Do You Have To Hook Up Both Reds And Both Blacks To Power Up This Inverter
(Posted by ronnie2459 2 years ago)
The Lights Will Not Turn Off After Charging On My Cobra Jumpack.
I purchased a Cobra jumpack from Evine 4-5 months ago. Now when I charge it the lights stay on and w...
I purchased a Cobra jumpack from Evine 4-5 months ago. Now when I charge it the lights stay on and w...
(Posted by rhondaharbison57 8 years ago)
Air Compressor Not Working
How Is The Compressor Turned On To Build The Air Pressure? Have The 500 But Can Not Use The Air Comp...
How Is The Compressor Turned On To Build The Air Pressure? Have The 500 But Can Not Use The Air Comp...
(Posted by floridawe2 10 years ago)
Rotary Switch
in charging the CJic 250 it is stated to turn the rotary switch off. Where is it located? I have rea...
in charging the CJic 250 it is stated to turn the rotary switch off. Where is it located? I have rea...
(Posted by jonewell 11 years ago)