Bosch 11241EVS Support Question
Bosch 11241EVS Support Question
Find answers below for this question about Bosch 11241EVS - 1-1/2" SDS Max Rotary Hammer Drill.Need a Bosch 11241EVS manual? We have 3 online manuals for this item!
Question posted by madmudder on January 24th, 2015
Bosch 11241evs 1-9/16 In. Sds-max Variable-speed Combination Hammer,
This item will drill with no issues but will not hammer what do I need to do to it to get it working?
Current Answers
Answer #1: Posted by TechSupport101 on January 24th, 2015 12:37 PM
TechSupport101
Member since:
May 24th, 2013 Points: 12,171,305
Member since:
May 24th, 2013 Points: 12,171,305
Hi. Possible causes
1. Crud in the chuck or collar
2. The bits not seated properly
3. Not well greased
4. Normal part 'Wear & tear"
Related Bosch 11241EVS Manual Pages
Operating Instructions - Page 2
... and/or serious personal
SAVE THESE INSTRUCTIONS
Work Area
Keep your tool.
cord to "Recommended sizes of Extension Cords" in the Accessory section of the tool in personal injury. When operating a power tool outside, use "AC only" rated tools with a qualified electrician if you are doing and use tool while tired or under the influence of...
Operating Instructions - Page 3
... the work by insulated gripping surfaces when performing an operation where the cutting tool may result in a dangerous condition. Service
Tool service must be performed only by the manufacturer for which generate dust. Service or maintenance performed by taking frequent rest periods. Use of unauthorized parts or failure to loss of this tool. Combination Hammer Safety...
Operating Instructions - Page 4
... cord becomes entangled with a handheld hammer or sledge hammer when attempting to these chemicals are specially designed to a complete stop.
Do not run the tool while carrying it could startle the operator and lead to maximum speed and impact force. WARNING
Some dust created by power sanding, sawing,
grinding, drilling, and other construction
activities contains...
Operating Instructions - Page 5
...by Underwriters Laboratories.
This symbol designates that this tool complies to Canadian Standards by the Canadian Standards Association. BM 1619929548 2/03 2/12/03 12:37 PM Page 5
Symbols
IMPORTANT: Some of drill bits, grinding wheels, etc. Higher number means greater speed
0
Infinitely variable selector with off
Speed is listed by Underwriters Laboratories. This symbol designates...
Operating Instructions - Page 6
...the tool accidentally. Combination Hammer
SPLINE TOOL HOLDER (Model 11248 only)
FIG. 1
SELECTOR LEVER
LOCKING SLEEVE DUST SHIELD
AUXILIARY HANDLE
TRIGGER SWITCH
TRIGGER RELEASE SWITCH
VARIABLE SPEED DIAL
SERVICE REMINDER
LIGHT
POWER INDICATOR
LIGHT
VENTILATION OPENINGS
HAND GRIP
Model number Shank style
11241EVS SDS Max
Maximum Capacities: Carbide tipped bits Thick wall core bits
1 9/16...
Operating Instructions - Page 7
... to the "OFF" position automatically. Slower speeds work best for faster penetration when drilling or chiseling in the Hammering Only mode which allows continuous operation without holding the trigger.
FIG. 2 LOCKING SLEEVE
HEX ROUND CHISEL
FLAT
ALIGNMENT MARK
FIG. 3
LOCKING SLEEVE
TRIGGER CONTROLLED VARIABLE SPEED
AUTO-MAX ™
Your tool is equipped with a "Lock-ON" feature...
Operating Instructions - Page 8
... you plug your operation. A combination hammer is intended for tools of the pressure applied on the trigger, the tool will reduce the stresses that occur from approximately 15 seconds (90˚F) to the desired position along with chipping bits such as clean air vents are necessary for chipping and demolition work
"TOOL TIPS" For the best...
Operating Instructions - Page 9
...RECOMMENDED SIZES OF EXTENSION CORDS 120 VOLT ALTERNATING CURRENT TOOLS
Tool's Ampere Rating
3-6 6-8 8-10 10-12 12-16
Cord Size in approximately 8 hours.
Some of these components without the need of power or
overheating.
WARNING
Preventive maintenance performed by a Bosch Factory Service
Center or Authorized Bosch Service Station. This provides the service technician the...
Use and Care Manual - Page 3
...Enjoy! We highly recommend that you read this manual before you use your dishwasher for selecting a Bosch dishwasher. You can call us at www.boschappliances.com.
TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS 2...13-14 Dishware Drying 15 Unloading the Dishwasher 15 Care and Maintenance 16-18 Self Help 19 Wash Cycle Information/Sanitized 20 Statement of Warranties 21 Customer ...
Use and Care Manual - Page 4
...Protect against freezing to avoid possible damage to damage the door seal. - Locate sharp items so that they are not likely to the fill valve. SAVE THESE INSTRUCTIONS!
2 ...information on the following pages.
Hydrogen gas is not covered by freezing is explosive. For plastic items not so marked, check the manufacturer's recommendations.
• Do not operate your dishwasher from ...
Use and Care Manual - Page 7
... not dishwasher safe and should be removed by using your water may separate. Separate items of vegetable oil to darken or spot. Minerals in your dishwasher for use in ...dishware and kitchenware. Stainless Steel, Sterling Silver, and Silver Plate: Place these pieces.
Some items are facing the spray arms. Avoid nesting and contact points between dishes.
Pewter, Brass, ...
Use and Care Manual - Page 8
...rack back into the dishwasher.
To lower the top
rack:
1. NOTE: Before you do not
need to press the RACKMATIC™ handles in
order raise the rack). Otherwise, the dishwasher door will ... Height Adjustment
(models SHE66C, SHV57C and SHX57C) The top rack can be lowered to accommodate large items in the top rack, and raised to make room for the top rack.
Grasp the tines as...
Use and Care Manual - Page 9
...™ cycle does not reduce wash time. To use the Top Rack Only™ cycle:
1.
Place cups upside-down . Loading the Bottom Rack
Place large items in Figure 7. Load pots
and pans upside-down on the roller guides, as shown in the bottom rack. Figure 10
Figures 10
and 11 show...
Use and Care Manual - Page 10
... be washed, see Figure 15. Figure 13
Rear
a
corner
view of
Rack
b
inset
Loading Extra Tall Items
If an item is assembled on the bottom rack's left side, center, or back. Figure 16
Insert the Extra Tall Item Sprinkler into the top rack spray outlet and turn the sprinkler clockwise to lock it stops...
Use and Care Manual - Page 18
... obstruction. Figure 30
2. You must remove the spray arms to check them under the dishwasher.
16
Check/Clean the Stainless Steel Inner Door and Tub
Clean the outer edges of the inside door ... nut counter-clockwise 1/8 turn and remove it, as shown in Figure 31.
If the spray nozzles need cleaning, flush them for obstruction in the spray nozzles.
5. The top spray
arm is full. Care...
Use and Care Manual - Page 21
... the dishwasher door slightly and propping it may occasionally exhibit problems that came with your Bosch dishwasher will not shut You may not be properly arranged. Dishes do not come on...a cycle.
Dishware drying can be accelerated and enhanced by utensils. • Spray arm nozzles need a plumber rather than a serviceman for the dishwasher. Machine cycle does not advance to rinse NOTE...
Use and Care Manual - Page 23
... or replace any defects or damage arising from accident, alteration, misuse, abuse, improper installation, unauthorized service work, external forces beyond Bosch's control, such as fire, flood, and other than one year from Date of Installation*: Bosch will replace the upper or lower dish rack (excluding rack components) free of charge, if the rack...
Use and Care Manual - Page 24
... please refer to repair the appliance yourself. Call us at 1-800-944-2904. Any work performed by unauthorized personnel may void the warranty. Figure 38
Model and Serial Number Label
...problem with this manual.
22 Do not attempt to the Self Help section. Customer Service
Your Bosch dishwasher requires no special care other than that described in the order listed below :
BSH Home ...
Parts List - Page 1
June 2002
INDUSTRIAL
ROTARY HAMMER Model 0611241739
11241EVS
2.1- 2.3 mm 142 167 121
Pos. 821 26
23 31 144 143
22 21
821 167121 97 142 154 146 30
28
856
94 44 124 ... 15 84
113
Spring Tension
175 111 803 13 112 34 176
= Pos. 897
43
811 817 42
27 2 131 1 172
9
D 80
B CA
D 135
C
S-B Power Tool Company Chicago IL 60646-5999
Parts List - Page 2
...9
75 1 615 132 087 Handle
74
79 1 613 435 015 Screw {2}
89
80 1 617 233 033 Speed Control
17
81 1 615 132 088 Handle Cover
74
84 1 612 025 054 Auxiliary Handle
9
85 1 618...121 1 610 328 019 Bushing
82
124 1 610 115 001 Sleeve
82
126 2 910 211 019 Screw
89
Pos. 11241EVS ROTARY HAMMER
Pos. Part Number Description {Qty.}
F/C
131 1 611 110 C71 Label
9
134 2 910 110 116 Screw
89
...
Similar Questions
Speed Control Dial Not Working Machine Runs On High
changed speed governor control unit and unit still runs on high and speed dial does not
changed speed governor control unit and unit still runs on high and speed dial does not
(Posted by regionalrestoration 9 months ago)
11241evs Do Not Hammer
My Bosh Hammer Drill 11241EVS rotates,but do not hammer.What can be the issue here??
My Bosh Hammer Drill 11241EVS rotates,but do not hammer.What can be the issue here??
(Posted by Erwinboekhoudt40 6 years ago)
I Am Looking For Bosch 11241evs Hummer Dril Handle Where I Can Get It?
I am looking for Bosch 11241EVS hummer dril handle where I can get it?
I am looking for Bosch 11241EVS hummer dril handle where I can get it?
(Posted by Nhamidy22 8 years ago)
Variable Speed
The variable speed is cutting out, not working all the time. What can I do?
The variable speed is cutting out, not working all the time. What can I do?
(Posted by cielohfj 11 years ago)
Bosch 11241evs Wont Turn On
I WORKING ON A Bosch 11241EVS AND IT WONT TURN ON WHEN I PRESS THE SWITCH I HAVE CHECKED THE SWITCH ...
I WORKING ON A Bosch 11241EVS AND IT WONT TURN ON WHEN I PRESS THE SWITCH I HAVE CHECKED THE SWITCH ...
(Posted by Nphilp1 13 years ago)