Bernina Bernette 15 Support Question
Bernina Bernette 15 Support Question
Find answers below for this question about Bernina Bernette 15.Need a Bernina Bernette 15 manual? We have 1 online manual for this item!
Question posted by fakrampe on December 9th, 2011
Bobbins For Bernette 15
What Bobbins work for the Bernette 15? Where do I find them?
Current Answers
Related Bernina Bernette 15 Manual Pages
Instruction Manual - Page 5
...all instructions before using this appliance is not working properly, if it to a third party....sewing machine needle.
8. Never operate the appliance with same type rated 5 watts/12V. WARNING- Return the appliance to break.
9. Do not use as threading needle, changing needle, threading bobbin...service center for its intended use outdoors. 15. Do not operate where aerosol spray ...
Instruction Manual - Page 6
...service agent or a similar qualified person in the product. SAVE THESE INSTRUCTIONS
This sewing machine is provided with the words "DOUBLE INSULATION" or "DOUBLE INSULATED". See instructions ...place anything on cord. No grounding means is committed to the product.
This sewing machine is intended for Servicing of the environment. Environmentalprotection BERNINA is provided on the...
Instruction Manual - Page 18
... dial 16. Thread cutter 8. Stitch width dial (model 15 only) 17. Presser foot lever
1 4
502020.75.24_021V4D0101_1010_IM_bernette 10 12 15_EN_DE_NL_FR Bobbin winder 14. Bobbin stopper 15. Stitch display 18. Main plug socket 24. Thread take-up lever 5. Reverse sewing lever 7. Needle threader 19. Pattern balance (model 15 only) 22. Pattern selector dial 21. Presser foot...
Instruction Manual - Page 20
...EN Accessories
Standard accessories 1. Button sewing foot 4. Oil bottle 8. Darning plate
Optional accessories * 15. Satin stitch foot (transparent)
... Invisible Zipperfoot 21. All purpose foot (J) 2. Bobbin (3x) 10. Quilting foot 1/4" 22. It must be bought separately.
** Optional accessory for bernette 10.
502020.75.24_021V4D0101_1010_IM_bernette 10 12 15_EN_DE_NL_FR Satin stitch...
Instruction Manual - Page 22
... foot (L) 18. Invisible Zipperfoot 20. Oil bottle 10 Seam ripper/ brush 11 Bobbin (3x) 12. Hemmer foot 17. Cording foot 19. Twin needle
* Optional accessories.... It must be bought separately.
18
502020.75.24_021V4D0101_1010_IM_bernette 10 12 15_EN_DE_NL_FR Button sewing foot 4. Spool holder 15. Darning/ Embroidery foot 23. Buttonhole foot (B) 5. Gathering foot 22. Walking foot...
Instruction Manual - Page 26
... power cord when machine is not in a polarized outlet only one blade is wider than the other). Sewing light Press main switch for the failure-free operation of electric shock, this machine must be 68&#...plug does not fit fully in any way. 10 12 15
EN
Connecting machine to power source
Connect the machine to a power source as to connect machine to power source. If it still does not fit,...
Instruction Manual - Page 32
... the left to the left, and pass it is in a clockwise direction or pass the thread through the bobbin winder tension. 10 12 15
EN Winding the bobbin
1. Guide the thread to "sewing position" and remove it. Before threading the machine, cut the thread near the hole of the holes on the spindle.
2. Push the...
Instruction Manual - Page 46
...the face plate.
42
502020.75.24_021V4D0101_1010_IM_bernette 10 12 15_EN_DE_NL_FR Sew a few reverse stitches.
Release the lever and the machine will sew forwards again.
Press the reverse sewing lever (A) while sewing backwards up lever to the fabric edge. Release reverse sewing lever and continue sewing. 10 12 15
EN
Beginning the seam Place fabric approximately 1cm (1/2") inward from...
Instruction Manual - Page 72
..., trousers, skirts, etc.
Sew slowly, by model 10.
... hem/lingerie for stretch fabrics. Fold the fabric as optional accessory. 10 12 15
EN Blind hem/lingerie stitch
Presser foot available as illustrated with the wrong side .... (1) Place the fabric under the foot. Blind hem for firm fabrics. Set the machine as illustrated.
Note: It takes practice to the left.
If it does not, adjust...
Instruction Manual - Page 82
...gimp thread. 4. E) When sewing buttonholes on Stretch Fabrics (fig. Making a Buttonhole on stretch fabric, place
a gimp thread under the buttonhole foot. 1. 15
EN How to sew buttonholes
Buttonhole-making is done in...the presser foot and start the machine. 7. Once sewing is sewn. Open the button plate and insert the button. (fig. Stop the machine when the buttonhole is completed, ...
Instruction Manual - Page 84
... and continue to form a "welt". (2)
Please note: No "S" marking is also possible to sew in a length of fabric). It is shown on the stitch length dial by model 10.
502020...15)
The zip foot can be inserted right or left, depending on " " or " ". "4" (according to sew. (1)
To sew past the zip pull, lower the needle into a bias strip to sew. 10 12 15
EN Zippers and piping
Set the machine...
Instruction Manual - Page 86
...guide the fold into the scroll by about 3 mm (1/8") and sew 4-5 stitches to secure. Begin sewing, guiding the fabric into the scroll on " " or " ". Set the machine as optional accessory. Pattern selector on the foot. (1)
Gently ... by holding it upright and slightly to "0". (model 15)
Neaten the edge of the fabric. 10 12 15
EN Hemmer foot
Presser foot available as illustrated. "4".
Instruction Manual - Page 88
...Set the machine as illustrated. "2". The stitch length can be shortened to use a piece of fabric and damage, sew between "1" - Depending on the type of backing fabric to reinforce.
"5". (model 15)
Place ... close stitches. (1)
When mending tears, it is shown on " ". 10 12 15
EN 3-step zig-zag
Sewing on both sides. Set stitch width control between "3" - The stitch density can be...
Instruction Manual - Page 90
... on " " or " ". For hardwearing seams, hems and decorative seams. Turn the stitch length dial to "0".
For hardwearing seams. Turn the stitch length dial to "S". The machine sews two stitches forwards and one stitch backwards. This gives triple reinforcement. 12 15
EN Stitch selection
Triple straight stitch: (1) Pattern selector on " ".
Instruction Manual - Page 92
Pattern selector on " ". Set stitch width control between "4" - Set the machine as for all types of jersey as well as illustrated.
Turn the stitch length dial to "S". "5". (model 15)
This stitch can be used for woven fabrics. (1)
Sew at 1 cm (1/4") from the fabric edge and trim the surplus fabric. (2)
88
502020.75.24_021V4D0101_1010_IM_bernette 10...
Instruction Manual - Page 94
Zigzag, decorative stitches. "4". "5". (model 15)
Insert the cord between "3" -
One, two or three cords can ...cord, e.g. The cord should run in the groove. Set the machine as optional accessory. Set stitch length control between "1" - Various stitches are suitable for sewing on " ". 10 12 15
EN Cording foot
Presser foot available as illustrated. Decorative effects, cushions,...
Instruction Manual - Page 110
...
- Insert the twin needle in the same way as single needle. Please note: When sewing with max. 2 mm needle distance. (i.e.bernette part number 502020.62.91)
Please note: No "S" marking is set between "0" and "2.5". Model 10/12 b. Model 15
502020.75.24_021V4D0101_1010_IM_bernette 10 12 15_EN_DE_NL_FR
106 Pattern selector on zigzag makesure the stitch...
Instruction Manual - Page 122
...the back under the foot. Draw the bobbin thread up. Lay both the "needle ...it is fitted on the "presser foot bar". Make sure both threads to the machine in
the following way. a Fork arm b Attaching head c Needle bar d Needle... Remove the "presser foot holder". (see page
26) 3.
Always try to sew first without the walking foot accessory which should fit into the needle
screw and ...
Instruction Manual - Page 124
... and lubricating the hook: Take out the bobbin case by opening its highest position. Disconnect machine from the shuttle race (3). 10 12 15
EN Maintenance
Caution: Main switch on the front of the free arm. Cleaning
Remove the stitch plate: Raise the needle to 2 drops) with sewing machine oil. Remove the hook race cover (b) and...
Instruction Manual - Page 128
... thread tension (lower number) 3. Replace the needle 1. Remove the upper thread and bobbin case, turn the handwheel
backwards and forwards by the machine 1. The needle is damaged 2. Mahine sews in the hook
1. Loosen the thread tension 1. The bobbin case is wrongly threaded 3. The bobbin case is not correctly threaded 3. Select the correct foot 1. Select a better...
Similar Questions
Bernette 66 Sewing Machine
How do I thread a Bernette 66 sewing machine?
How do I thread a Bernette 66 sewing machine?
(Posted by stringpam 8 years ago)
Bernette15
thread keeps getting jammed in bobbin. i have changed the needle and re- threaded.
thread keeps getting jammed in bobbin. i have changed the needle and re- threaded.
(Posted by Anonymous-139477 9 years ago)
Bernina 1090 S Sewing Machine Manual
I Dont See The User Manual For This Machine For Free Downloading.what User Manual Are The Same As Th...
I Dont See The User Manual For This Machine For Free Downloading.what User Manual Are The Same As Th...
(Posted by cynthianel 10 years ago)
Looking For A Manual On A Berenia 640 Sewing Machine. Artista
Cannot get a manual to download from the website WWW.bernia usa
Cannot get a manual to download from the website WWW.bernia usa
(Posted by jsue 11 years ago)
My Sewing Machine Bernette 15 Stops Working
After 1 day using my Bernette 15 stops working - engine hoots but doesn't rotate spindle and hand wh...
After 1 day using my Bernette 15 stops working - engine hoots but doesn't rotate spindle and hand wh...
(Posted by sgrayxx 12 years ago)