Bernina Bernette 15 Support Question
Bernina Bernette 15 Support Question
Find answers below for this question about Bernina Bernette 15.Need a Bernina Bernette 15 manual? We have 1 online manual for this item!
Question posted by Anonymous-139477 on July 6th, 2014
Bernette15
thread keeps getting jammed in bobbin. i have changed the needle and re- threaded.
Current Answers
Related Bernina Bernette 15 Manual Pages
Instruction Manual - Page 5
... appliance by the manufacturer as threading needle, changing needle, threading bobbin, or changing presser foot, and the like...Keep fingers away from the electrical outlet when removing covers, lubricating, or when making any opening. 14. Switch the sewing machine off ("O") when making any air openings blocked. Use only attachments recommended by a person responsible for use bent needles...
Instruction Manual - Page 6
...disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your local government for information regarding the collection systems... service personnel. A double insulated product is intended for free of grounding.
This sewing machine is legally obligated to the protection of our products by the manufacturer or its ...
Instruction Manual - Page 18
... 2. Bobbin winder 14. Needle threader 19. Presser foot 9. Stitch display 18. Handwheel 20. Pattern balance (model 15 only) 22. Bobbin winder pre-tension 4. Pattern selector dial 21. Handle 25. Thread tension dial 6. Main plug socket 24. Presser foot pressure 3. Spool pin 12. Thread cutter 8. Bobbin stopper 15. Stitch width dial (model 15 only) 17. Reverse sewing lever...
Instruction Manual - Page 20
...foot (G) 17. Cording foot 20. It must be bought separately.
** Optional accessory for bernette 10.
502020.75.24_021V4D0101_1010_IM_bernette 10 12 15_EN_DE_NL_FR Button sewing foot 4. Seam guide 11. Invisible Zipperfoot 21. Darning/ Embroidery foot 23. Bobbin (3x) 10. Hemmer foot 18. Pack of needles (3x) 6. L-screwdriver 7. Second spool pin 12. Darning plate
Optional accessories...
Instruction Manual - Page 26
... power and light on . If the plug does not fit fully in doubt as illustrated.
Machine is switched on . (1)
Position 0 - 10 12 15
EN
Connecting machine to power source
Connect the machine to a power source as to connect machine to power source.
Sewing light Press main switch for the failure-free operation of electric shock, this...
Instruction Manual - Page 32
... the empty bobbin in "bobbin winding" position, the machine and the handwheel can not be operated. Before threading the machine, cut the thread near the hole of the holes on the spindle.
2. Take the thread to the right towards the bobbin winding position. Before threading the machine, cut the thread near the hole of the bobbin.
To start sewing, push the bobbin winder spindle...
Instruction Manual - Page 34
... finger fits into the hook (5).
Open the hinged cover (1).
- Pull the thread through the slit and under the finger spring (3).
- 10 12 15
EN Inserting bobbin
When inserting or removing the bobbin, the needle must be fully raised.
- Insert the bobbin so that the thread runs in a clockwise direction (arrow) (2).
- Attention: Turn power switch to off ("O") before...
Instruction Manual - Page 38
... in the take -up to be in the
highest position when threading.
1. To release the upper thread tension the
presser foot lever has to the left of upper thread tension.
2. Take thread down to "O" before threading
or unthreading the machine. - Place spool on pin using the thread cutter (E).
34
502020.75.24_021V4D0101_1010_IM_bernette 10 12 15_EN_DE_NL_FR 10 12...
Instruction Manual - Page 42
... possible sewing results using other or different types of thread, and it may be necessary to adjust tension to the next number down. The upper thread tension is too tight,
decrease setting. (B1)
Note: The tension is too loose,
increase setting. (C1) C. The optimum tension may vary when using a thread (Metrosene 100/2). 10 12 15...
Instruction Manual - Page 44
... not have to bring the lower thread up the lower thread
Hold the upper thread with the left hand.
Lay both threads to the back under the presser foot.
502020.75.24_021V4D0101_1010_IM_bernette 10 12 15_EN_DE_NL_FR
40
Caution: When starting to sew do not pull on the upper thread to . 10 12 15
EN Bringing up through the...
Instruction Manual - Page 46
... plate.
42
502020.75.24_021V4D0101_1010_IM_bernette 10 12 15_EN_DE_NL_FR
Cutting the thread (3) Cut both threads with the thread cutter (B) located on the left rear side of seam, press down the reverse sewing lever (A). Sew a few reverse stitches. Release the lever and the machine will sew forwards again. 10 12 15
EN
Beginning the seam Place fabric approximately 1cm (1/2") inward...
Instruction Manual - Page 54
...thread, carpet thread. (Use heavy foot pressure large numbers.)
NEEDLE, FABRIC SELECTION
Needles HA×1 15×1
15×1/ 130/705H
15×1/ 130/705H (SUK)
Explanation Standard sharp needles...and synthetic woven fabrics, polyester blends. fabrics. Twin needles can be taken when choosing needle and thread. For a perfect sewing result, thread and fabric quality play an important role. Care ...
Instruction Manual - Page 82
... that provides reliable results. Lower the presser foot and start the machine. 7. Mark the position of the foot, insert them into the grooves and temporarily tie them there. 3. 15
EN How to sew buttonholes
Buttonhole-making is completed, gently pull the gimp thread to remove any slack, then trim off the excess.
78
502020...
Instruction Manual - Page 86
...thread slightly towards you and lower the presser foot. Set stitch length control between "2.5" - "4". Pattern selector on the foot. (1)
Gently pull the fabric edge towards the back. Insert the needle...12 15
EN Hemmer foot
Presser foot available as illustrated. Set the machine as optional accessory. At the beginning of the fabric.
For hems in fine or sheer fabrics. Begin sewing,...
Instruction Manual - Page 98
... ". Turn work from behind the needle clamp screw (B).
The lever (A) should be behind with your index finger and tighten the screw (C). (3)
First sew round the edge of the hole ...(to right. Move the drop feed control to left to secure the threads). (4) First row: Always work by model 10.
502020.75.24_021V4D0101_1010_IM_bernette 10 12 15_EN_DE_NL_FR
94 15...
Instruction Manual - Page 110
... - Please note: When sewing with max. 2 mm needle distance. (i.e.bernette part number 502020.62.91)
Please note: No "S" marking is set between "0" and "2.5". Model 15
502020.75.24_021V4D0101_1010_IM_bernette 10 12 15_EN_DE_NL_FR
106 Flat side of the same weight. Follow instructions for single needle threading. Center needle position. - a.
Thread each needle separately. Model 10/12...
Instruction Manual - Page 112
... up the lower thread through the fabric. Preparation for normal use . (model 10/12) - Place the fabric under the needle. Adjust the stitch width according to sew. -
Draw the...feed dogs. (2) (model 15) - 10 12 15
EN
Monogramming and embroidering with both hands and guide it. - Lower presser foot lever before starting point. - Set the machine as optional accessory.
-...
Instruction Manual - Page 122
... foot bar". Draw the bobbin thread up. iv) Tighten the fixation screw 4. a Fork arm b Attaching head c Needle bar d Needle screw & clamp e Presser...machine in
the following way.
Lift the presser foot bar. 2. Remove the "presser foot holder". (see page
26) 3. i) The fork arm should fit into the needle
screw and clamp. (2) ii) Slide the plastic "attaching head" from
your left to sew...
Instruction Manual - Page 124
...hook (c) then the hook race cover (b), snap back the two retaining arms (a).
10 12 15
EN Maintenance
Caution: Main switch on the front of the free arm. Loosen the two ...bobbin case by opening its highest position. Then clean with the brush (2). Important: Fabric, fluff and threads must be removed. Cleaning
Remove the stitch plate: Raise the needle to 2 drops) with sewing machine ...
Instruction Manual - Page 128
...as illustrated 3. DEEN Troubleshooting guide
Problem Upper thread breaks
Skipped stitches
Needle breaks
Loose stitches
Seams gather or pucker Uneven stitches, uneven feed The machine is noisy The machine jams Machine sews in the hook
1. The needle is attached 1. The bobbin case is not threaded correctly 2. The needle is too thick for the needle 4. Fabric has been pulled 1. Poor quality...
Similar Questions
Bernette 66 Sewing Machine
How do I thread a Bernette 66 sewing machine?
How do I thread a Bernette 66 sewing machine?
(Posted by stringpam 8 years ago)
New Bulb Not Working In Sewing Machine Bernette 12 What Can It Be
(Posted by Anonymous-152221 8 years ago)
Bernina 1090 S Sewing Machine Manual
I Dont See The User Manual For This Machine For Free Downloading.what User Manual Are The Same As Th...
I Dont See The User Manual For This Machine For Free Downloading.what User Manual Are The Same As Th...
(Posted by cynthianel 10 years ago)
Bobbins For Bernette 15
What Bobbins work for the Bernette 15? Where do I find them?
What Bobbins work for the Bernette 15? Where do I find them?
(Posted by fakrampe 12 years ago)
My Sewing Machine Bernette 15 Stops Working
After 1 day using my Bernette 15 stops working - engine hoots but doesn't rotate spindle and hand wh...
After 1 day using my Bernette 15 stops working - engine hoots but doesn't rotate spindle and hand wh...
(Posted by sgrayxx 12 years ago)