Samsung HL56A650 Support Question
Find answers below for this question about Samsung HL56A650 - 56" Rear Projection TV.Need a Samsung HL56A650 manual? We have 2 online manuals for this item!
Question posted by Jmiller85 on January 26th, 2012
I Have A Samsung Hl56a650c1fxza And It Just Stopped Working.
My tv just stopped working. You can not power it on or off. THe standby light, timer light, and the lamp light are all blinking. What could this be?
Current Answers
Answer #1: Posted by TVDan on January 26th, 2012 8:19 PM
this is likely a lamp failure (part # BP47-00023A), you should pull out the lamp and look for obvious breakage or bubbles. Here is my normal script for the symptoms:
Normally this is an indication that you have a bad lamp, but really what this indication is, the microprocessor has not received the signal from the optical engine that "the lamp is lit and all is well". There are many things that need to happen before the lamp will start up. The power supply must develop all the needed voltages required by all the rest of the circuits, the cooling fans must be running at the correct speeds, the lamp door switch must be closed (interlock switch), The Color Wheel must be able to spin at the 1800 RPM and lock in sync with the video signal, the ballast circuit must be able to develop the 5000 volts to start-up the mercury vapor lamp, and the lamp needs to be in good working condition to light up. There should be no weird noises pointing to the fact that a fan or the color wheels motor bearings are starting to go bad.
The normal failures are the lamp and the color wheel. Unfortunately there is NO way to test a lamp. I have seen nearly 100 lamps come into my shop that has failed in less than a month, and many that didn't last one full day. These lamp you buy off the web are many times factory seconds. I have had some customers send back a lamp two, three, and four times before they got one that lasted through the warranty. Our shop only buys from the manufacturer.
When you turn on this DLP HDTV the fans will start up first and then the color wheel will spin-up. If the color wheel doesn't get up to the 1800 RPM and maintain that speed then the lamp will not get to enable pulse. unfortunately after three attempts the set will shut down and the indicators will blink telling the customer to change the lamp, and of course after the customer does it, the problem remains the same. The microprocessor is located in the signal cluster and all it knows is that the lamp didn't light up correctly, so it gives the change lamp LED indicator blink
TV Dan
Related Samsung HL56A650 Manual Pages
Samsung Knowledge Base Results
We have determined that the information below may contain an answer to this question. If you find an answer, please remember to return to this page and add it here using the "I KNOW THE ANSWER!" button above. It's that easy to earn points!-
General Support
.../Stop Button In Standby mode...power off the road and park before starting to charge the battery completely before using the phone while driving, keep the headset at : Kyungwon Electronics #280, Cheonpyeong-Ri, Gasan-Myun, Chilgok-Gun, Gyeongbuk, Korea To which this equipment does cause harmful interference to radio or television...experienced radio/TV technician for ...all such work. Putting on... -
How To Reset And Pair Your Remote SAMSUNG
...Televisions > LED TV > Important: If after replacing the batteries and resetting and pairing your remote with an object like a toothpick or pen. How To Calibrate Your Battery 19415. Press the [Pairing] button on your remote, and using the [Power] button on the TV..., turn on your remote at least twice, the remote control is not working, and is ... -
Using Anynet+ With A Home Theater SAMSUNG
... Home Theater (HDMI out). HDMI connections on the rear of the Anynet+ Television (LN40750) connections on the rear of the Anynet+ Home Theater (HT-AS720ST) connections on the rear of how to connect an Anynet+ TV to Optical 2 which is labeled with the Anynet+ function. an optical cable from...
Similar Questions
Will Sound Go Out If Lamp Is Bad On Samsung Rear Projection
(Posted by drmwjbal 9 years ago)
Samsung Hl56a650c1fxza Will Not Turn On 2 Green Lights 1 Red Light Blinking
(Posted by gfrradame1 10 years ago)
Samsung Tv Wont Turn On Red Light Blinking 56 Inch Dlp
(Posted by KagtJnLm 10 years ago)
Samsung Hls5687wx- 56' Rear Projection Tv
Where do you find the fan #2 in the tv
Where do you find the fan #2 in the tv
(Posted by sturmpaula 11 years ago)
The Following Is Happening To My Tv: Standby/temp, Timer, And Lamp Keep Flashi
the tv comes on for about a minute and then goes off the above mentioned lights start to flash and t...
the tv comes on for about a minute and then goes off the above mentioned lights start to flash and t...
(Posted by cabukl51 12 years ago)