Ridgid MS255SR Support Question

Find answers below for this question about Ridgid MS255SR.
Need a Ridgid MS255SR manual? We have 1 online manual for this item!

Ridgid Overview Questions Manuals Reviews Videos Research

Question posted by rjsautoservice on September 19th, 2016

Ms255sr Parts

can you tell me where i can buy parts for my saw please ?

I Know the Answer!

I have the same question
Request More Information

Current Answers

Answer #1: Posted by freginold on September 20th, 2016 3:11 AM

This answer was accepted by the poster of the original question.

freginold

Member since:
December 20th, 2011

Points: 23,253,895

1,090
points

Parts for this model seem to be hard to find online. ToolPartsDirect.com offers some parts. If they don't have the parts you need, you can contact Ridgid support here and see if they can help you find a parts supplier.

https://configpages.blogspot.com

Related Ridgid MS255SR Manual Pages

Operation Manual - Page 1

OPERATOR'S MANUAL 10 INCH SLIDING COMPOUND MITER SAW WITH DUAL LASER MS255SR � WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using this product. Thank you for buying a RIDGID product. 1-866-974-3443/USA SAVE THIS MANUAL FOR FUTURE REFERENCE

Operation Manual - Page 2

table of contents General Safety Instructions 2 Specific Safety Instructions 3 Additional Instructions for Safe Operation 4 Symbols 5 Electrical 6 Lasers 7 Glossary 7 Features 8 Tools Needed 11 Loose Parts 11 Assembly 12 Adjustments 13 Operation 18 Maintenance 31 Troubleshooting 33 Warranty 34

Operation Manual - Page 3

...of the tool, a guard or other part that is...part that it safely. � WARNING: Read and understand all times. • Maintain tools with padlocks and master switches or by removing starter keys. • Don't force the tool; Table 1 shows the correct size to follow all instructions listed below may cause a risk of unintentional starting. Read this manual to understand this miter saw...

Operation Manual - Page 4

... and the type of cut or into the blade. Never use solvents to clean plastic parts. Always keep sawdust from chemically treated lumber. Should this ever occur, stand clear and ...piece; Solvents could dissolve or otherwise damage the material. • Do not turn the tool off rapidly. Disconnect the saw from these chemicals: • Work in a well-ventilated area. • Work with...

Operation Manual - Page 5

...saw wears. • Inspect the tool cords periodically and, if damaged, have these instructions. Direct particles away from this tool. Learn the applications and limitations, as well as the specific potential hazards related to this tool... parts. A guard or other part that may cause serious and permanent respiratory or other condition that is dusty. • Protect your power tool....

Operation Manual - Page 6

... reduce the risk of injury, user must read and understand operator's manual before using this tool. Hot surface To reduce the risk of injury or damage, avoid contact with side shields ... expose to rain or use in serious personal injury. No hands symbol Failure to operate the tool better and more safely. Safety alert Precautions that involve your hands away from the blade will allow...

Operation Manual - Page 7

... (double-insulated) tools. Do not change the plug in any power tool can result in the tool, be performed only by a qualified person. This compound miter saw is a double-insulated tool. �WARNING:...the cord away from the moving parts. Electrical �WARNING: Do not permit fingers to explain the levels of electric shock, double-insulated tools are intended to touch the terminal ...

Operation Manual - Page 8

...it. • Chamfer Cut: A cut that removes a wedge from which the saw . • Do not replace the laser light assembly with the manufacture's instructions... angle other than 90° to activate the laser when the tool housing is removed. • The laser is activated with a ...the location from a block of wood so that the end (or part of the end) is a Class II laser that is independent of ...

Operation Manual - Page 9

... on which a blade or cutting tool is mounted. • Throat Plate: A plate inserted in the Miter Saw's table that allows for blade clearance. • Through Sawing: Any cutting operation where the blade...RPM): The number of turns completed by the blade. • Set: The distance that the saw blade tooth is bent (or set) outward from rotating while tightening or loosening the blade screw during...

Operation Manual - Page 11

... both right and left. Press the right bevel range control lever down and the saw arm can tilt to securely clamp the work piece. One end of this tool. CarRying handles For convenience when carrying or transporting the miter saw from one place to cut crown molding horizontally or vertically, use the bevel...

Operation Manual - Page 12

Tools needed The following tools (not included) are needed for making adjustments: 3mm Hex key Loose parts The following items are included with no need for buying a RIDGID product. 1-866-974-3443/USA SAVE THIS MANUAL FOR FUTURE REFERENCE Operator's manual Fig. 4 11 Crown molding stop BUTTON The crown molding stop button locks the saw... COMPOUND MITER SAW WITH DUAL LASER MS255SR Dust bag Hex...

Operation Manual - Page 13

... the workbench after mounting to heed this manual. This is intentional so that no breakage or damage occurred during use with the saw base for this tool until the missing parts are damaged or missing, please call 1-866-974-3443/USA for mounting to a workbench is factory set for hole pattern Fig. 5 The...

Operation Manual - Page 14

... upper sliding fences and reattach the fence-locking knobs. Unplug the saw. � WARNING: Failure to unplug your saw could result in accidental starting causing serious injury. 2. Set the ... bolts Upper sliding fence 13 Fig. 6 Fig. 7 Fig. 8 Unplug the saw. � WARNING: Failure to unplug your saw could result in the "DOWN" position. 4. Place the heel of a combination ...

Operation Manual - Page 19

...In some operations, the clamp assembly may require several cycles. To reduce the risk of the saw , turn the laser light adjustment screw counter-clockwise or clockwise with side shields. � WARNING... or suspected. � WARNING: Always wait for the blade to stop completely, and unplug the tool before using the laser light. 1. The clamp should be removed in place. 4. Rotate the work...

Operation Manual - Page 30

... finished piece. 0° Inside Corner - Angle the molding so the bottom of the molding (the part which goes against the wall when installed) is against the ceiling and the wall, the sum of... cut for correct Miter setting. When setting the bevel and miter angles for the angles of the saw (Fig 34). Left side LEFT side is finished piece. 0° Outside Corner - changing one also...

Operation Manual - Page 32

... that the spindle-lock button is provided in the miter saw arm. 3. Install the selected blade by turning it clockwise. Unplug the tool. 2. Securely tighten the blade screw. 6. Wrench storage is... spindle to turn the blade screw counter-clockwise until it safely. Lower the saw . 2. Unplug the saw arm, and check the clearance between the blade and the miter table. Remove...

Operation Manual - Page 33

...; WARNING: To ensure safety and reliability, all repairs should be performed by their use only identical replacement parts. Automotive oil directly to the arm pivot shaft. 3. BRUSH REPLACEMENT Fig. 38 The saw could result in this tool are susceptible to come in . Replace both brushes when either has less than 1/4 in contact with...

Operation Manual - Page 34

lightly sticking. 2. Use a recommended blade. 3. Replace brushes. Replace brushes. See ADJUSTMENT section. Parts failure. 2. Warped blade. 1. Clean and lubricate moving parts. 1. See OPERATION section. 2. Replace or sharpen blade. 3. Saw blade is too bright. 1. Light in work area with a soft, dry brush. 33 See MAINTENANCE section. 2. when switch is hard to the work ...

Operation Manual - Page 35

... you are not covered. are not responsible for this RIDGID® Hand Held or Stationary Power Tool for any part covered under state law are disclaimed. This product is licensed from state to you must present proof of the tool. The trademark is manufactured by applicable law, all original equipment packaged with the...

Operation Manual - Page 36

... SLIDING COMPOUND MITER SAW WITH DUAL LASER MS255SR CUSTOMER SERVICE INFORMATION For parts or service, call . Be sure to the motor housing. MS255SR 35 Please record the serial number in the space provided below. When ordering repair parts, always give the following information: Model No. Serial No. The model number of this tool is found on...