GE WPGT9150HMG Support Question
GE WPGT9150HMG Support Question
Find answers below for this question about GE WPGT9150HMG - Profile 27" Washer.Need a GE WPGT9150HMG manual? We have 1 online manual for this item!
Question posted by ladysuzeq on January 4th, 2021
Shattered Glass In Lid
The glass in my washer lid is shattered. Can I replace it or buy a new lid?
Current Answers
Answer #1: Posted by Odin on January 4th, 2021 1:32 PM
Odin
Member since:
April 10th, 2010 Points: 41,236,690
Member since:
April 10th, 2010 Points: 41,236,690
Go to https://www.appliancepartspros.com/search.aspx?model=wpgt9150hmg to see what's available. Good luck!
Hope this is useful. Please don't forget to click the Accept This Answer button if you do accept it. My aim is to provide reliable helpful answers, not just a lot of them. See https://www.helpowl.com/profile/Odin.
Related GE WPGT9150HMG Manual Pages
Owners Manual - Page 1
Profile Washers
ge.com
Safety Instructions 2, 3
Operating Instructions
Control Panel 4-5 Features 6-8 Loading and Using the Washer 9, 10
Installation Instructions
Before You Begin 11-13 Step-by-Step Instructions . . . . . .13-16
Troubleshooting Tips . . . . . ... serial numbers here:
Model
Serial
You can find them on the rear cover of the washer backsplash.
175D1807P604 49-90336 09-07 JR
Owners Manual - Page 2
...the gas is used for two weeks or more , prevent the possibility of life. I Properly ground washer to conform with all hot water faucets and allowing them to run for two weeks or more .... in accordance with or inside this before it will allow children to the hot water system.
YOUR LAUNDRY AREA
I Close supervision is necessary if this appliance is flammable, do not smoke or use an ...
Owners Manual - Page 3
...washer lid to carry out.
Check the condition of electric shock,
Wait until the machine has completely stopped
unplug this appliance only for its intended purpose as
I The laundry...replaced every 5 years. Safety Instructions Operating Instructions
ge.com
WHEN USING THE WASHER
I Turn off the circuit breaker before opening the lid.
Do not add these substances around
your washer ...
Owners Manual - Page 4
... appearance may vary from the power supply. NOTE: Pressing POWER does not disconnect the appliance from your model.
1
3 45
26
1 Power Press to put the washer into idle mode. Operating Instructions Safety Instructions
About the...
Owners Manual - Page 5
...Higher spin speeds remove more water from setting on some casual wear clothes. NOTE: The washer performs automatic system checks after pressing the START button. WHITES/HEAVY DUTY For heavily to ...speeds are washed according to use a detergent suitable for specific types of soil. If the washer is always cold. The GentleClean™ lifters lightly tumble the clothes into the water and ...
Owners Manual - Page 6
... and start of hours you will enter the pause state.
Operating Instructions Safety Instructions
About the washer features.
Press the DELAY START button to choose the number of the cycle, then press the...: When using MY CYCLE, wash options cannot be available on all washer models. Press the button until you open the lid when the delay is 3 hours. To use powder detergent in order...
Owners Manual - Page 7
...siphoning of bleach per wash cycle. Doing so could result in early dispensing of the washer. This is water, not bleach. At the end of bleach directly into the ...compartments.
The manufacturer's recommended amount of additives.
• Avoid overfilling or splashing when adding laundry products to the wash load.
Also keep clothes away from the dispenser. Closing the drawer...
Owners Manual - Page 8
...• Do not exceed the maximum fill line. When using too much detergent in your washer, as Tide® HE.
Dilute with the detergent box and insert in place.
Overfilling can...sure the detergent box and insert are in place.
Avoid using liquid detergent, make sure all washer models.
Adding Fabric Softener
If desired, pour the recommended amount of the fabric softener, which...
Owners Manual - Page 9
... higher than the top row of the wash basket. To add items after washer has started, lift the lid, add items and close the lid.
• Do not wash fabrics containing flammable materials (waxes, cleaning fluids, etc.)
• The washer will automatically detect the load size. Fabric Care Labels
Below are available that affect...
Owners Manual - Page 10
...the outside and inside and dry with a damp cloth on the front of the Washer
Lid: Wash with a soft cloth. Installation Instructions
Consumer Support Troubleshooting Tips
10 Care and ... technician to be replaced every 5 years.
Proper Use of laundry problems. Today's detergents are formulated to remove water from the upper and lower parts of accumulated laundry products.
3 To...
Owners Manual - Page 11
...are in a risk of the
installer. • Product failure due to 66°C) TO THE WASHER. Do not modify the plug provided with this appliance requires
basic mechanical skills. • Proper ... an extension cord or adapter plug with the appliance-if it will reduce the risk of the washer. Keep these instructions for
future reference. • Skill level -
DRAIN - Do not, under...
Owners Manual - Page 12
... shelves, cabinets, ceilings, etc., is 52″. A louvered door with lid
open)
281⁄ 4″ (71.6 cm)
12 The washer should not be given to weather. Concrete flooring is best, but a wood... for installing and servicing.
27″ (68.6 cm)
Side View
523⁄ 4″ (133.7 cm)
(with equivalent air openings for washer only, or if the closet contains both a washer and a dryer, door ...
Owners Manual - Page 13
... the Styrofoam block containing the Owner's Manual, parts, water hoses and laundry product samples.
❑ Cable Tie
TOOLS YOU WILL NEED
❑ Adjustable Pliers ❑ Carpenter's Level
Remove the power cord from the back of the washer.
1 UNPACK THE WASHER
After the washer is in the home, remove the carton and Styrofoam shipping base...
Owners Manual - Page 14
...8243;
Cable Tie
Cable Tie
14 Installation Instructions
2 ATTACH WATER HOSES TO WASHER
Thread the hot water hose onto the washer hot water connection (ORANGE) and the cold water hose onto the cold ...are built into the drain opening of the water hoses with pliers.
3 MOVE WASHER CLOSE TO HOUSE UTILITIES
Move the washer as close to the final location as possible, leaving enough room to the ...
Owners Manual - Page 15
... 4 to lower.
15 This action will set rear leg adjustments to correspond to front settings.
7 LEVEL THE WASHER
Move the washer into final position. • To check if the washer is level side to side,
open the lid and place a level at the back of the opening above the dispenser drawer. • To check...
Owners Manual - Page 16
... - For replacement parts and other information, refer to warm up before pressing POWER. NOTE: If the washer has been exposed to temperatures below freezing for an extended period of time, allow it to the Owner's Manual for use.
16
Wiring errors can cause improper and dangerous operation after servicing/installation.
The washer is...
Owners Manual - Page 17
...... Check that the water faucets are turned to their completely open positions.
• The washer lid must be free of solids) on the unit are not clogged.
Press POWER.
•...is tripped/blown Electronics need to call for best wash performance. Replace fuses or reset breaker. Washer should have separate outlet.
• Unplug washer, wait 2 minutes, plug back in and press POWER.
...
Owners Manual - Page 19
... the load size and type to add more water to the wash load.
If the washer senses that the load is operating to the wash load. Wash Boost additives are normal sounds you may be diluting laundry additives to add to the cycle as it changes the cleaning mode.
draining
Pinging noise...
Owners Manual - Page 20
... for any labor or related service costs. During this additional eight-year limited warranty, you may be responsible for a trip charge or you will also replace the washer lid or cover if they should fail due to the product caused by accident, fire, floods or acts of incidental or consequential damages. I Damage to...
Owners Manual - Page 21
During this product lifetime limited warranty, you will also replace the washer lid or cover if they should fail due to the original purchaser and any... control board if any labor or related service costs. What Is Not Covered (in Canada):
I Replacement of house fuses or resetting of the washer which fails due to a defect in materials or workmanship. I Service trips to your home to ...
Similar Questions
Washer Will Not Start
What do I need to to went E7 come up when you push start?
What do I need to to went E7 come up when you push start?
(Posted by estherfallis57 6 years ago)
How To Replace A Cracked Lid
My lid shattered and now needs replaced. GE is sending out a new lid. Just wondering if it is hard t...
My lid shattered and now needs replaced. GE is sending out a new lid. Just wondering if it is hard t...
(Posted by dlgreco 10 years ago)
Lid Lock Problem (ge Washer/dryer Gtup270gmww)
Our washer has run, but will not release the lid lock. We've had a wet load of laundry in for over a...
Our washer has run, but will not release the lid lock. We've had a wet load of laundry in for over a...
(Posted by kgilbert08 11 years ago)
My Washer Keeps Shutting Down During The Rinse Cycle.
Then I have to wait half an hour to restart the washer and it has to restart from the beginning of a...
Then I have to wait half an hour to restart the washer and it has to restart from the beginning of a...
(Posted by goldieadams 11 years ago)
How To Open The Lid On A G131 Washer Without Tripping Shutoff?
curious, should anything go wrong? How does one know whether it is operating correctly if it stops w...
curious, should anything go wrong? How does one know whether it is operating correctly if it stops w...
(Posted by sed1077 12 years ago)