Dell PowerEdge 2950 Support Question
Dell PowerEdge 2950 Support Question
Find answers below for this question about Dell PowerEdge 2950.Need a Dell PowerEdge 2950 manual? We have 8 online manuals for this item!
Question posted by sacriaungk on November 10th, 2013
How Do You Replace Cmos Battery Poweredge 2950
The person who posted this question about this Dell product did not include a detailed explanation. Please use the "Request More Information" button to the right if more details would help you to answer this question.
Current Answers
Related Dell PowerEdge 2950 Manual Pages
Installing a SATA Optical Drive - Page 4
... and 1900 systems do not reuse the interposer board attached to the optical drive. Replacing a PowerEdge 2950 or 2970 Optical Drive
NOTE: If you must be replaced with the drive tray provided with the system is used for the SATA optical drive. See Figure 1-1.
2 Pull the interposer board connector from the optical ...
Installing a SATA Optical Drive - Page 5
... Drive in a PowerEdge 2950 or 2970 System
2 1
3
4
5
6
7
1 optical drive 3 interposer 5 SATA power cable 7 optical drive carrier
2 interposer release latch 4 SATA cable 6 carrier latch
Replacing a PowerEdge 1950 Optical Drive
NOTE: The replacement drive tray provided in the side of the SATA optical drive into the tray until the pins on the carrier align with the holes...
Installing a SATA Optical Drive - Page 8
... Remove the cooling shroud. See Figure 1-4.
7 Route the SATA cable along the top of the chassis and replace the cable retention bracket over the cable. SATA Cable Routing in the right wall of the cable retention bracket ...bracket detaches from the chassis slots.
6 Route the SATA cable in the cable channel in the PowerEdge 2950 and 2970
1
2
3 4 5
1 SATA_B connector on the system board.
Information Update - Page 1
Dell™ PowerEdge™ 2950 Systems
Information Update
Information Update - Page 3
PowerEdge 2950 III Systems 9 Processor Upgrades - Safeguarding Encrypted Data 9 System Message Update 10 LCD Status Messages Update 15
Contents
3...6 Optional Internal USB Memory Key 6 Installing the Optional Internal USB Memory Key 7 Support for 8-GB Memory Modules - Power 2950 II and PowerEdge 2950 III Systems 9 System Board Replacement - Contents
Non-Optimal Memory Configurations...
Information Update - Page 5
... a non-optimal memory configuration is detected and the following message is displayed: Non-Optimal Memory Configuration Press F1 to the slowest speed in the system. PowerEdge 2950 III - The system clocks down the performance to continue or F2 for the channel.
Information Update - Page 9
... drive. For more than 4 GB of physical memory. System Board Replacement -
Power 2950 II and PowerEdge 2950 III Systems
• If the front of your system chassis is labeled with a "II", your system is fully supported. Safeguarding Encrypted Data
On PowerEdge 2950 III systems using Windows Server® 2008, you can use encryption programs, such as the...
Information Update - Page 10
If you replace the system board, you must supply the recovery key when you restart your system ... to notify you are installed in a
interleaving, or the
configuration that node
for additional information
interleaving cannot be
for the PowerEdge 2950 III system and the probable cause and corrective action when the message appears. Check
(for example, a failed
other system messages...
Information Update - Page 15
... "Using the System Setup Program" in the Hardware Owner's Manual. The SYSTEM NAME displays under the following conditions:
• The system is powered on the PowerEdge 2950 III system and the probable cause for each message.
See "Getting Help" in the Hardware Owner's Manual.
The BMC is unable to events recorded in...
Information Update - Page 21
... default)
Enabled without PXE, Enabled with TPM. NOTE: Systems that are shipping in the system.
System Interrupts This field controls the interrupt assignment for the PowerEdge 2950 III system. Table 1-6. Integrated Devices Screen Option
Option
Description
Embedded Gb NIC2 Enables or disables the system's integrated NIC.
CAUTION: Before enabling the TPM Security...
Information Update - Page 24
..., Microsoft® Windows® 2000 is saved. System Diagnostics Update
In the Customize window of operating systems on the Server OS Install tab. System Support for Microsoft Windows 2000
If you to a hard drive.
24
Information Update
This operating system is supported by the PowerEdge 2950 and 2950 II systems, but not by the...
Information Update - Page 46
Microsoft Windows 2000
System Build and Update Utility Microsoft® Windows® 2000 将位于 Server OS Install PowerEdge 2950 和 2950 II PowerEdge 2950 III
Customize Log output file pathname USB
46
信息更新
Information Update - Page 109
POST Non-Optimal Memory Configuration Press F1 to continue or F2 for Setup F1 F2
DIMM DIMM DIMM
PowerEdge 2950 III
Intel® Xeon® 5400 5300 2 個。
• 8 GB
BMC
109
Information Update - Page 129
...
On with Pre-boot Measurements TPM が OS POST TCG TPM
On without PXE（PXE Enabled with PXE（PXE Disabled PXE
System Security
PowerEdge 2950 III 1-7 TPM TPM Security（TPM OS が TPM
表 1-7. Integrated Devices
Embedded Gb NIC2
Enabled without PXE）
説明
NIC
Enabled without Pre...
Information Update - Page 132
...; cat/sys/devices/system/cpu/cpuxx/cpufreq/scaling_ cur_freq
• RHEL 3 9 Intel Xeon 54xx proc/cpuinfo
RHEL 4
Microsoft Windows 2000
System Build and Update Utility Server OS Install OS OS Microsoft® Windows® 2000 PowerEdge 2950/2950 II OS PowerEdge 2950 III
Customize Log output file pathname USB
132
Hardware Owner's Manual (PDF) - Page 20
... See "Troubleshooting System
temperature and has been
Cooling Problems" on . failed. RAID battery is powered on page 119.
Setup program. Ambient system temperature is for
redundant.
page...on page 147. Specified voltage regulator has See "Getting Help" on page 119. CMOS battery is missing, or the See "Troubleshooting the System voltage is See "Troubleshooting System ...
Hardware Owner's Manual (PDF) - Page 27
...169. For example, if the code E1418 CPU_1_Presence appears, you know that the RAID Replace RAID battery.
Removing LCD Status Messages
For faults associated with sensors, such as temperature, voltage, fans...wait approximately ten seconds, reconnect the power cable, and restart the system.
See "RAID battery has less than 24 hours of events, and is easily corrected. For example, if you...
Hardware Owner's Manual (PDF) - Page 96
...'s instructions. See "Entering the System Setup Program" on page 132 for the other heat sink retention lever. 5 Reinstall the fan bracket.
System Battery
The system battery is incorrectly installed. Replace the battery only with your processor kit, remove the
protective sheet from the electrical outlet. 2 Open the system. See your Product Information Guide for...
Hardware Owner's Manual (PDF) - Page 118
...computer and protecting against electrostatic discharge.
1 Run the appropriate online diagnostics test. See "Using Server Administrator Diagnostics" on the system. 4 Enter the System Setup program. See "Using the...If the problem is caused by replacing the battery, see your Product Information Guide for the time kept in the System Setup program, replace the battery. The power supply's fault ...
Hardware Owner's Manual (PDF) - Page 127
... the electrical outlet. 4 Open the system.
See "Front Bezel" on page 147. • If you have a SAS RAID controller daughter card, replace the SAS RAID daughter card battery. See
"Installing a RAID Battery" on page 76. 6 Close the system. Action
CAUTION: Only trained service technicians are authorized to remove the system cover and access...
Similar Questions
