Brother International LX2500 Support Question
Brother International LX2500 Support Question
Find answers below for this question about Brother International LX2500.Need a Brother International LX2500 manual? We have 2 online manuals for this item!
Question posted by lberg33592 on September 27th, 2014
Stitches Are Incorrect
When I put it on zig zag it gives me a hem stitch, another zig zag will stitch back and forth (sideways) but the stitch is just a straight stitch. 14 looks scalloped. Nothing is as it should be. I've tried rethreading, reinserting bobbin, turning off machine, trying different stitches. Help!
Current Answers
Answer #1: Posted by TechSupport101 on September 27th, 2014 10:33 PM
TechSupport101
Member since:
May 24th, 2013 Points: 12,171,305
Member since:
May 24th, 2013 Points: 12,171,305
Hi. The video here
http://www.youtube.com/watch?v=IFiUzdSxGpA
may be of some help.
Related Brother International LX2500 Manual Pages
Users Manual - English and Spanish - Page 3
...dealer to break.
• Do not push or pull the fabric when sewing, and follow careful instruction when freehand stitching so that this manual. FOR USERS IN THE UK, EIRE, MALTA ... for household use or store the machine near children.
• The plastic bag that you should contact your local authorized Brother dealer. Never use a damaged or incorrect needle plate, as marked on plug...
Users Manual - English and Spanish - Page 4
... bed attachment 5
USING YOUR SEWING MACHINE 6 Connecting plugs 6 Main power and sewing light switch 7 Foot controller 7 Checking the needle 7 Replacing the needle 7 Changing the presser foot 8
THE CONTROLS 9 Pattern selection dial 9 Patterns and stitch names 9 Reverse sewing lever 10
THREADING THE MACHINE 11 Winding the bobbin 11 Lower threading 13 Upper threading 14 Drawing up the...
Users Manual - English and Spanish - Page 5
....
Depending on the model you easily perform most sewing tasks.
1.
2.
3.
4.
5.
6.
7.
8.
9. 1 KNOWING YOUR SEWING MACHINE
1
ACCESSORIES
We have designed these accessories to be included with your machine.
1.
2.
3.
4.
5.
6.
7.
8.
Part Name
5 1/4-inch Quilting Foot
6 Narrow Hemmer Foot
7 Blind Stitch Foot
8 Quilting guide
Part Code
Americas Others
SA125...
Users Manual - English and Spanish - Page 6
... 8)
9 Reverse sewing lever (Page 10) Push this to control the sewing speed, and to start and stop sewing. KNOWING YOUR SEWING MACHINE
THE MAIN PARTS
43...machine to the power supply.
Contact your dealer or the nearest authorized service center. Slide the flat bed attachment to the left to manually raise and lower the needle.
E Presser foot lever (Page 14) Used to choose the stitch...
Users Manual - English and Spanish - Page 7
... other ).
only) ● This appliance has a polarized plug (one way. If it from the machine • After using the machine • When the power fails during use extension cords or multi-plug adapters with wet hands. USING YOUR SEWING MACHINE
1
WARNING
● Use only regular household electricity for a long period of electric shock, this...
Users Manual - English and Spanish - Page 8
... that the mark on the wheel points up on the foot controller.
only) ● Foot Controller: Model KD-1902
This foot controller can be straight and sharp for home use sewing machine needles for smooth sewing.
1 2
1 Turn on (toward the 'I' mark) 2 Turn off . Otherwise, injuries may bend or break and cause injury.
● Never...
Users Manual - English and Spanish - Page 9
...) so that the mark on the wheel points up. With the flat side of the sewing machine may be damaged.
● Always turn the
needle clamp screw counterclockwise to be damaged.
If...stitch pattern you have chosen.
Using any other presser foot may be used with the slot on the shank.
8
Turn off the machine before you change the presser foot depending on what you want to sew...
Users Manual - English and Spanish - Page 10
...■ 17 Stitches
1 2 3 4 5 6 78
9 10
11
12 13 14 15 16 17
Pattern
Stitch Name 1
4-STEP AUTOMATIC BUTTONHOLE 2
STRAIGHT STITCH (Center Needle Position) 3
STRAIGHT STITCH (Center Needle Position...stitch, simply turn the pattern selection dial, the needle, presser foot or fabric may bend or break the needle and cause injury.
Reference Page 27
23, 31
23, 31
9
KNOWING YOUR SEWING MACHINE...
Users Manual - English and Spanish - Page 11
... 34, 35,
37
4 (3/16) -
23, 31
14
STRETCH BLIND HEM STITCH 15
SCALLOP STITCH 16
DOUBLE ACTION STITCH 17
2 (1/16) 5 (3/16) 0.5 (1/32) 5 (3/16) 1.2 (1/16) 5 (3/16) 1.2 (1/16)
24, 37 26 26 26
7
STRAIGHT STITCH (Left Needle Position)
2.5 (3/32) -
23, 31, 33, 34
BRIDGING STITCH
5 (3/16)
Reverse sewing lever
8
ZIGZAG STITCH 9
ZIGZAG STITCH
0.7 (1/32) 1.5 (1/16) 1.5 (1/16)
3 (1/8)
23, 29, 32...
Users Manual - English and Spanish - Page 12
... (part code: SA156, SFB: XA5539-151). KNOWING YOUR SEWING MACHINE
THREADING THE MACHINE
Winding the bobbin
CAUTION
● We designed the bobbin that comes with your right hand, pass the thread
toward you use the bobbin that comes with this machine or bobbins of thread is set incorrectly, the thread may cause damage to the...
Users Manual - English and Spanish - Page 13
... the bobbin from the inside of the
7 • Leave 1 cm (1/2 inch) of the thread straight up.
When the bobbin seems full and begins 9 spinning slowly, take your foot off the foot
controller...held at an angle, injuries may tangle around the bobbin, the machine will make a clicking sound; Note
● When the sewing machine is started or the handwheel is turned after winding the thread ...
Users Manual - English and Spanish - Page 14
... needle.
If the thread unrolls in the direction shown by turning the 2 handwheel toward you. KNOWING YOUR SEWING MACHINE
CAUTION
● Not winding the bobbin properly may cause the thread tension to loosen, and may cause incorrect thread tension.
1
1
1 Tension-adjusting spring
1 Bobbin cover
13 If you accidentally step on the foot controller...
Users Manual - English and Spanish - Page 16
... of 4 thread on the wheel points up.
• If the needle is not correctly raised, the sewing machine can not be threaded. While holding the thread from right to break. Make sure you raise the needle by...or is lowered, the upper thread can not be wrapped around the thread take-up lever is set incorrectly, the thread may tangle on the spool pin and cause the needle to left
as shown in ...
Users Manual - English and Spanish - Page 17
...-up lever before you feed the upper thread.
● If you incorrectly feed the thread you (counterclockwise) by holding the
thread
1
thread in... toward the back of both 3 threads and put them toward
you may cause sewing problems.
1 2
1 Upper thread 2 Lower thread
16 Thread the needle from... Lower thread
Pull out about 10 cm (4 inches) of
the machine under the presser foot.
Users Manual - English and Spanish - Page 18
...needle (65/9-75/11), may bend or break the needle. KNOWING YOUR SEWING MACHINE
FABRIC, THREAD, AND NEEDLE COMBINATIONS
Fabric Type/Application
Medium weight fabrics
Thin ...14 to skip stitches.
17 It may be uneven, the fabric to pucker, or the machine to 100/16 needle, regardless of Needle
75/11-90/14
65/9-75/11 100/16
90/14-100/16
Ball point needle 75/11-90/14 (gold colored)
65/9-90/14...
Users Manual - English and Spanish - Page 19
...) of thread toward the rear of the machine.
1
1 5 cm (2 inches)
18 2 SEWING BASICS
Please read before sewing
CAUTION
● To avoid being injured, ...watch the needle carefully while you
(counterclockwise) so that the needle does not hit basting pins or other way may cause the thread to select a 3 stitch...
Users Manual - English and Spanish - Page 20
... used for your foot off the foot controller. 0 X The machine stops sewing.
• You can use reverse sewing for the details. Take your project, and check the thread tension and stitch length and width.
Refer to its highest position.
Trial sewing
A trial piece of the c machine, and then pass the threads
through the thread cutter to...
Users Manual - English and Spanish - Page 23
..." on page 13 and rethread the bobbin thread.
2
CAUTION
2
● When changing the sewing direction, be damaged.
In this case, refer to a lower number.
■ Upper tension is too tight Loops will affect the quality of your fabric.
2
1 3 4
1 Surface of fabric 2 Back of the fabric. X Two lines of stitching are sewn parallel to...
Users Manual - English and Spanish - Page 41
... is appropriate for the type of stitch.
17
▼ The upper thread tension is not appropriate for the thread Choose a needle that you for
you want to the
machine does right. The needle is too tight. Correctly install the needle.
7
The needle clamp screw is scratched. sew. You can solve most problems by...
Users Manual - English and Spanish - Page 42
... a thread and needle that has been designed for the type of stitch that has been designed for this machine. Sew with stabilizer material under the fabric. The thread tension is incorrect.
You have not fitted the spool properly. The thread tension is incorrect.
The thread tension is scratched or does not turn smoothly. Remove the...
Similar Questions
Where Is The Basting Stitch On The Sc9500 Brother Sewing Machine
Where is the basting stitch on the sc9500 brother sewing machine
Where is the basting stitch on the sc9500 brother sewing machine
(Posted by kschroepfer 9 years ago)
Brother Lx2500 Sewing Machine Skips Zig Zag Stitches. Skips Stitches In Any Zig
(Posted by jadeokoye 9 years ago)
How To Tighten A Zig Zag Stitch On A Brother Lx2500 Sewing Machine
(Posted by Royxaaleckk 10 years ago)
Brother Ls 2000 Sewing Machine Price
I Want To Know Above Sewing Machine Price In Indian Rupees,please Anser Me Imediately
I Want To Know Above Sewing Machine Price In Indian Rupees,please Anser Me Imediately
(Posted by iladave84503 10 years ago)
Brother Lx2500 Sewing Machine
I have a Brother LX2500 sewing machine and at tops the top thread pops right off the machine. Is the...
I have a Brother LX2500 sewing machine and at tops the top thread pops right off the machine. Is the...
(Posted by Aprille2175 10 years ago)