Bernina Bernette 12 Support Question
Bernina Bernette 12 Support Question
Find answers below for this question about Bernina Bernette 12.Need a Bernina Bernette 12 manual? We have 1 online manual for this item!
Question posted by Jeannebean1959 on November 23rd, 2013
Berninà Minimatic 707
Lower thread is too loose, is this a tension issue?? What do you to tighten the tension??
Current Answers
Related Bernina Bernette 12 Manual Pages
Instruction Manual - Page 5
... use as described in the needle area, such as threading needle, changing needle, threading bobbin, or changing presser foot, and the like. 12. Special care is not intended for use by persons...physical, sensory or mental capabilities, or lack of lint, dust, and loose cloth.
7. This appliance is required around the sewing machine needle.
8. Use this manual. The wrong plate can cause the ...
Instruction Manual - Page 6
...unplug by continuously improving product design and our technology of charge.
502020.75.24_021V4D0101_1010_IM_bernette 10 12 15_EN_DE_NL_FR To unplug, grasp the plug, not the cord.
18. Use only identical replacement...be added to take back your health and well-being.
SAVE THESE INSTRUCTIONS
This sewing machine is marked with new once, the retailer is provided on cord.
Do not ...
Instruction Manual - Page 20
...Zipperfoot 21. It must be bought separately.
** Optional accessory for bernette 10.
502020.75.24_021V4D0101_1010_IM_bernette 10 12 15_EN_DE_NL_FR Satin stitch foot (transparent)
* Optional accessories are not ...guide 11. Hemmer foot 18. Cording foot 20. Quilting foot 1/4" 22. 1 6
10 12
EN Accessories
Standard accessories 1. Spool pin felt 14. Blind hem foot (L) 19. All purpose...
Instruction Manual - Page 26
... a polarized outlet only one blade is not in the outlet, reverse the plug. Sewing light Press main switch for the failure-free operation of electric shock, this machine must be 68° +/- 50°.
22
502020.75.24_021V4D0101_1010_IM_bernette 10 12 15_EN_DE_NL_FR IMPORTANT NOTICE If the appliance has a polarized plug (one way. Do not...
Instruction Manual - Page 32
... when it . Before threading the machine, cut the thread near the hole of the bobbin. Take the thread to the right towards the bobbin winding position. Push the bobbin to "sewing position" and remove it is in a clockwise direction or pass the thread through the bobbin winder tension.
Press the foot control gently. 10 12 15
EN Winding...
Instruction Manual - Page 38
... 10 12 15_EN_DE_NL_FR Take thread up to back.
5. The thread take -up lever must be raised. - Insert the thread through guide (D). Pull thread down and through the eye of the needle from front to the left of upper thread tension.
2. To release the upper thread tension the
presser foot lever has to "O" before threading
or unthreading the machine. - Take thread through...
Instruction Manual - Page 44
...: When starting to sew do not pull on the upper thread to . Pull on the taut threads under the presser foot. (2)
Note: When the excess thread was cut, the thread can be brought up, however does not have to bring the lower thread up the lower thread
Hold the upper thread with the left hand. 10 12 15
EN Bringing up...
Instruction Manual - Page 46
... plate.
42
502020.75.24_021V4D0101_1010_IM_bernette 10 12 15_EN_DE_NL_FR Release the lever and the machine will sew forwards again.
10 12 15
EN
Beginning the seam Place fabric approximately 1cm (1/2") inward from the outer edge under the presser foot. Release reverse sewing lever and continue sewing.
Cutting the thread (3) Cut both threads with the thread cutter (B) located on the left...
Instruction Manual - Page 72
...accordingly. (2) Adjust the guide (3) by hand until the needle swings fully to sew blind hems. Always make a sewing test first. For hems, curtains, trousers, skirts, etc.
Blind hem/lingerie ...Set the machine as illustrated with the wrong side uppermost. (1) Place the fabric under the foot. Sew slowly, by model 10.
502020.75.24_021V4D0101_1010_IM_bernette 10 12 15_EN_DE_NL_FR
68 10 12 15
EN...
Instruction Manual - Page 82
... will be sewn first.) 4. Lower the presser foot and start the machine. 7. Attach the buttonhole foot and set the pattern selection dial to remove any slack, then trim off the excess.
78
502020.75.24_021V4D0101_1010_IM_bernette 10 12 15_EN_DE_NL_FR Mark the position of the
buttonhole on stretch fabric, place
a gimp thread under the buttonhole foot...
Instruction Manual - Page 84
... shown on " " or " ".
10 12 15
EN Zippers and piping
Set the machine as illustrated. Turn the stitch width dial to "0". (model 15)
The zip foot can be inserted right or left, depending on which side of the foot you are going to sew. (1)
To sew past the zip pull, lower the needle into a bias...
Instruction Manual - Page 86
... edge twice by model 10.
502020.75.24_021V4D0101_1010_IM_bernette 10 12 15_EN_DE_NL_FR
82 Pull the thread slightly towards you and lower the presser foot. 10 12 15
EN Hemmer foot
Presser foot available as illustrated. Set stitch length control between "2.5" - Set the machine as optional accessory.
Begin sewing, guiding the fabric into the scroll on the foot...
Instruction Manual - Page 88
.... "2". Set stitch width control between "1" - First sew over the center and then overlap on lace and elastic, darning, mending, reinforcing edges.
The stitch density can be varied by model 10.
502020.75.24_021V4D0101_1010_IM_bernette 10 12 15_EN_DE_NL_FR
84 "5". (model 15)
Place patch in position. Set the machine as illustrated. Pattern selector on the stitch...
Instruction Manual - Page 90
... "0". This gives triple reinforcement. Turn the stitch width dial to "S". The machine sews two stitches forwards and one stitch backwards. For hardwearing seams, hems and decorative...etc.
86
502020.75.24_021V4D0101_1010_IM_bernette 10 12 15_EN_DE_NL_FR Triple zigzag: (2) Pattern selector on " " or " ".
12 15
EN Stitch selection
Triple straight stitch: (1) Pattern selector on " ".
Instruction Manual - Page 110
... sure to maintain low speed to insure quality stitching.
Model 10/12 b. Thread each needle separately. Insert the twin needle in the same way as single needle. Flat side of the same weight. Please note: When sewing with max. 2 mm needle distance. (i.e.bernette part number 502020.62.91)
Please note: No "S" marking is set...
Instruction Manual - Page 112
...
Embroidery hoop available as optional accessory.
- Set the machine as possible. - Preparation for normal use . (model 15)
Please note: No "S" marking is down in its lowest position. - Adjust the stitch width according to sew. - Turn the stitch length dial to bring up the lower thread through the fabric. Stretch the fabric between embroidery hoop...
Instruction Manual - Page 120
... on the stitch length dial by model 10.
502020.75.24_021V4D0101_1010_IM_bernette 10 12 15_EN_DE_NL_FR
116 Pattern selector on the under side of the material.
- Pull the lower thread to about 2) so that the lower thread lies on " " or " ".
- Attach the gathering foot.
- If more of straight stitches.
- Sew a single row or multiple rows of the material.
Instruction Manual - Page 124
... When the needle is in the left position. Important: Fabric, fluff and threads must be removed. Your machine should be serviced at regular intervals at the point (d) (1 to its latch...(e) is lowered, the shuttle hook cannot be removed regularly. Cleaning
Remove the stitch plate: Raise the needle to 2 drops) with sewing machine oil. Disconnect machine from the shuttle race (3). 10 12 15
EN...
Instruction Manual - Page 128
...4. Thread is too tight 1. Mahine sews in the hook
1.
Rethread the machine 2. Reduce the thread tension (lower number) 3. Select a larger needle 4. Remove and reinsert the needle (flat side towards the back) 3. Replace the needle 1. Remove and reinsert needle(flat side towards the back)H 2. Choose a needle to next increment.
124
502020.75.24_021V4D0101_1010_IM_bernette 10 12...
Instruction Manual - Page 132
... up the lower
thread
40
C
Congratulations
12
Connecting machine to
Power source...Sewing on buttons Sewing table Smocking stitch
70 14
96
110 112
42 72, 74
20 88
Stitch selection Stitches overview Straight stitching and
needle position
54, 86 56
60, 62
T
Threading the upper
thread
34
Trouble shooting guide 124
Twin needle
106
Two-step presser foot
lever
24
U
Upper thread tension...
Similar Questions
Threading My Bobbin!!
I'm having such a hard time getting the bobbin from below to cath with my needle. I've watched tutor...
I'm having such a hard time getting the bobbin from below to cath with my needle. I've watched tutor...
(Posted by Bobbijeandavis 11 months ago)
Bernette 66 Sewing Machine
How do I thread a Bernette 66 sewing machine?
How do I thread a Bernette 66 sewing machine?
(Posted by stringpam 8 years ago)
New Bulb Not Working In Sewing Machine Bernette 12 What Can It Be
(Posted by Anonymous-152221 8 years ago)
How Do I Get The Needle To Dip Down Into The Bobbin Case To Bring Up Thread?
the tension for upper and lower threads is set at 4, but i cannot make the needle dip down and pick ...
the tension for upper and lower threads is set at 4, but i cannot make the needle dip down and pick ...
(Posted by skye6438 10 years ago)
My Sewing Machine Bernette 15 Stops Working
After 1 day using my Bernette 15 stops working - engine hoots but doesn't rotate spindle and hand wh...
After 1 day using my Bernette 15 stops working - engine hoots but doesn't rotate spindle and hand wh...
(Posted by sgrayxx 12 years ago)