I Need Installation Instructions For Aeg Dpb3632s Cooker Hood

Tools and materials needed:

A drill

A screwdriver

A spirit level

A tape measure

Ducting (if required)

Duct tape

Grommets (if required)

Instructions:

Prepare the installation space. The cooker hood should be installed above a hob or cooker. The minimum distance between the hob surface and the lower part of the cooker hood should be 65 cm, unless otherwise specified in the installation instructions for the appliance or hob.

Mark the position of the cooker hood. Use a spirit level to mark the position of the cooker hood on the wall.

Drill the mounting holes. Use a drill to drill the mounting holes in the wall.

Secure the cooker hood to the wall. Use screws to secure the cooker hood to the wall.

Connect the cooker hood to the power supply. Connect the cooker hood to the power supply using a suitable cable.

Install the ducting (if required). If you are using ducting to vent the cooker hood to the outside, install the ducting according to the manufacturer's instructions.

Connect the ducting to the cooker hood. Connect the ducting to the cooker hood using duct tape or grommets.

Turn on the cooker hood and test it. Turn on the cooker hood and test it to make sure that it is working properly.

Here are some additional tips for installing the AEG DPB3632S cooker hood:

Read the installation instructions carefully before you start.

Make sure that the wall is strong enough to support the weight of the cooker hood.

If you are not comfortable installing the cooker hood yourself, you can hire a qualified electrician or plumber to do it for you.

I hope this helps! Let me know if you have any other questions.