Zanussi ZKG7165 Support Question
Zanussi ZKG7165 Support Question
Find answers below for this question about Zanussi ZKG7165.Need a Zanussi ZKG7165 manual? We have 1 online manual for this item!
Question posted by zzjonzz on November 27th, 2016
Pump Vibration
what could cause vibration on pump of a zkg7165
Current Answers
Answer #1: Posted by Odin on November 27th, 2016 1:26 PM
Odin
Member since:
April 10th, 2010 Points: 41,236,680
Member since:
April 10th, 2010 Points: 41,236,680
Hope this is useful. Please don't forget to click the Accept This Answer button if you do accept it. My aim is to provide reliable helpful answers, not just a lot of them. See https://www.helpowl.com/profile/Odin.
Related Zanussi ZKG7165 Manual Pages
Product Manaul - Page 2
... by a person who is responsible for their safety.
• Do not let children play with the appliance for the operation of experience and knowledge use causes injuries and damages. Before the installation and use 14
Safety information
Personalisation 15 Daily Use 15 Use -
Product Manaul - Page 3
....
• Do not install or use a damaged appliance.
• Do not install or use multi-plug adapters and extension cables.
• Make sure not to cause damage to the mains plug and to have the necessary space between 0,5 bar (0,05 MPa) and 8 bar (0,8 MPa) • The ventilation openings in the base...
Product Manaul - Page 4
...the door while a programme operates. Disposal
www.zanussi.com Water connection
• Make sure not to cause damage to the water hoses.
• The appliance is no gas lighters or matches have been ... -
Old hose sets must not be reused.
• Before you remove all metal objects from the laundry. • The final part of the drying cycle, immediately remove and spread out all items, so...
Product Manaul - Page 5
... before starting the programme. Compartment for main wash. www.zanussi.com
5 Warning!
Product description
1 Detergent dispenser drawer 2 Control panel 3 Door opening handle 4 Rating plate 5 Drain pump 6 Adjustable feet
Service
• Contact the Service to get closed in the appliance. If using liquid detergent pour it . • Remove the door catch to...
Product Manaul - Page 7
...;At the end of the last rinse is designed to save energy.
This option is recommended for laundry which needs only freshening up to a maximum of 20 hours by 5 mins.
Drying Time
If you... out.
• light blinking: the door is opening the door it necessary to rinse the laundry using an extra quantity of symbols
= Rinse hold
By selecting this option. Extra Rinse
This appliance...
Product Manaul - Page 9
...; Main wash - Cottons + Prewash 60° - 40° Prewash - Reduced load 2 kg1) Synthetic or mixed fabrics: underwear, coloured garments, non-shrink shirts, blouses.
Type of Laundry
Cottons 90° - 60° Main wash - Rinses Maximum spin speed at 1200 rpm (ZKG 7125), 1400 rpm (ZKG 7145), 1600 rpm (ZKG 7165) Max...
Product Manaul - Page 10
... spin speed at 1200 rpm Max. A single or bulky item may cause imbalance. Jeans 40° Main wash - Rinses Maximum spin speed at 900 rpm Max. The Extra Rinse option will perform additional rinses. Maximum Fabrics Load - In this programme the laundry is possible to eliminate mud stains. load kg 3 - Wool / Handwash...
Product Manaul - Page 13
... above, then treat stains with acetic or citric acid, then rinse. Treat any residual marks with rust stains which are washing a small load
• the laundry is classified in water and detergent, rinse and treat with methylated spirits. Degrees of water hardness
Water hardness is lightly soiled
• large amounts of...
Product Manaul - Page 14
...may vary depending on the condensation principle.
The experience will help you are washing the laundry or a fabric conditioner specifically for a timed drying are indicated in order to avoid...8226; = Drying at high temperature
• = Drying at the end of washed laundry, in the appropriate compartments of the concentrated detergent. Your appliance incorporates a re-circulation ...
Product Manaul - Page 15
... be impossible to start the machine. After pressing button 7: it will be impossible to change any manufacturing residue from the drum and tub. Load the laundry
Open the door by or cause damage to remove any other programme or option.
There are two different ways to worry that no...
Product Manaul - Page 16
... have set the programme and before you have chosen a delayed start, the machine will start after choosing the desired programme and before you want your laundry to the required programme. Select the delay start by pressing button 7
To start the programme. Press button 8 once. Important!
Select the programme and the required...
Product Manaul - Page 17
... can select a new programme. Altering an option or a running programme
It is running . Reduce the spin speed if needed, by pressing button 7 again. Remove the laundry from the drum and carefully check that the water level is empty. Leave the door open it is locked to press button 7. The Delay Start...
Product Manaul - Page 20
... pins, coins etc.
Replace the drawer and run the rinse programme without any clothes in the appliance is hot. Cleaning the pump The pump should be cold before you clean the drain pump. Do not remove the filter while the appliance operates. The water must be inspected regularly and particularly if: • the...
Product Manaul - Page 21
...in the hose with a stiff brush.
• Screw the hose back onto the tap.
Never remove the pump cover during a wash cycle, always wait until the appliance has finished the cycle, and is tight.
Keep... machine is tight.
• Turn on the programme selected there can be hot water in the pump.
When the appliance is securely retightened so as to stop leaks and young children being able to ...
Product Manaul - Page 22
when the drain pump is not responsible for damages caused by low temperatures. The manufacturer is empty, install the water inlet hose again. if ...an engineer. During machine operation it is possible that the red pilot light of button 7 blinks, one of the drain pump;
6.
place a container on the display and some acoustic signals sound every 20 seconds to lack of the detergent dispenser...
Product Manaul - Page 23
...Please check your domestic electrical installation. There is not properly inserted in the drum. • Redistribute the laundry. The main fuse has blown. • Replace the fuse. The drain filter is too low. ...machine fills then empties immediately: The machine does not empty and/or does not spin:
Possible cause/Solution
The door has not been closed . • Open the water tap. The filter ...
Product Manaul - Page 24
... is still not evenly distributed in the drum, the machine will not open:
The machine vibrates is water in the drum.
• Redistribute the laundry. If, after cleaning action.
• Screw the filter fully in because the laundry is still running. • Wait the end of the appliance. Stubborn stains have not been...
Product Manaul - Page 25
... based on . • Open the water tap.
The drain filter is overloaded. • Reduce the laundry load in the drum.
Technical data
Dimensions
www.zanussi.com
Width Height Depth
60 cm 85 cm 63 cm... drum: The machine does not dry or does not dry properly:
The laundry is full of different colored fluff:
Possible cause/Solution
The machine is fitted with a type of motor which makes an ...
Product Manaul - Page 26
... the duration of
46
the programmes,
please refer to the
display on the inner edge of laundry, on the inlet water temperature and on floating, slippery and wooden floors. The rubber feet are...data entered in the energy label, in the fixing plates.
Mount the rubber feet to prevent vibration, noises and displacement of 6 kg is to be removed before using the appliance.
Follow the...
Product Manaul - Page 27
...
Unscrew the three bolts. Positioning
Install the machine on a flat hard floor. To help prevent vibration we recommend you place a waterproof wood panel, at least 15 mm thick under the machine to...by
www.zanussi.com
Installation on suspended flooring Suspended wooden floors are particularly susceptible to vibration. Before connecting up the appliance to new pipework or to pipework that has not...
Similar Questions
Pump Vibrates
Pump vibrates when pumping water only. this is not a spinning vibration problem
Pump vibrates when pumping water only. this is not a spinning vibration problem
(Posted by zzjonzz 7 years ago)
Where Is The Main Fuse In A Zanussi Zkg7165 Washing Machine?
Where is the main fuse on a Zanussi ZKG7165 washing machine?
Where is the main fuse on a Zanussi ZKG7165 washing machine?
(Posted by alaningram 9 years ago)
Zanussi Zkg7165 Washing Machine Fault.
Hi, I have a ZKG7165 which is abotu 2 years old. Recently, it has developed a fault where it complet...
Hi, I have a ZKG7165 which is abotu 2 years old. Recently, it has developed a fault where it complet...
(Posted by ricky87462 10 years ago)
Vibration Problems Of Zanussi Zkg7145
When the machine is spinning on only 900 the entire building is vibrating and the flat below is comp...
When the machine is spinning on only 900 the entire building is vibrating and the flat below is comp...
(Posted by jane49354 10 years ago)
