Stihl BGA 100 Support Question
Stihl BGA 100 Support Question
Find answers below for this question about Stihl BGA 100.Need a Stihl BGA 100 manual? We have 1 online manual for this item!
Question posted by tbehringer55 on May 14th, 2023
The Switch Keep Cycling On And Off And Wont Stay On
When I try to pull the trigger it keeps clicking like a relay is resetting, it wont turn off. The battery is fine as I tested it with the other tools.
Current Answers
Answer #1: Posted by ipeyman on May 14th, 2023 11:30 AM
ipeyman
Member since:
April 20th, 2023 Points: 490
Member since:
April 20th, 2023 Points: 490
If the switch on your tool is cycling on and off and won't stay on, it could indicate a problem with the switch itself or an electrical issue. Here are a few steps you can take to troubleshoot the problem:
- Check for loose connections: Ensure that all the connections between the battery and the tool are secure. Make sure the battery is properly inserted and locked into place. Additionally, inspect the wiring near the switch to see if any connections are loose or damaged.
- Clean the switch: Over time, dust, dirt, or debris can accumulate in the switch, causing it to malfunction. Use compressed air or a small brush to clean around the switch area and remove any debris that may be affecting its operation.
- Inspect the switch for damage: Examine the switch for any visible signs of damage, such as broken or loose parts. If you notice any physical damage, the switch may need to be replaced.
- Reset or replace the battery: Even though you mentioned that the battery works fine with other tools, it's worth trying a different battery or resetting the current one. Remove the battery from the tool, wait a few minutes, and then reinsert it to see if that resolves the issue.
- Seek professional repair: If none of the above steps resolve the problem, it's possible that there is a more complex electrical issue within the tool. In such cases, it's recommended to consult the manufacturer's customer support or take the tool to a professional repair technician for further assistance.
Remember to prioritize your safety when working with power tools. Always disconnect the tool from the power source and remove the battery before attempting any troubleshooting or repairs.
Related Stihl BGA 100 Manual Pages
Instruction Manual - Page 3
...
{
BGA 100
This instruction manual is protected by
User
17
Maintenance and Care
18
Main Parts
19
Specifications
20
Troubleshooting
22
Maintenance and Repairs
24
Battery Recycling
...a high-speed battery-powered tool, some special safety precautions must be recycled. Original Instruction Manual
Printed on Charger
14
Controls
15
Switching On
16
Switching Off
16
Storing...
Instruction Manual - Page 4
...indoors in dry rooms.
2
BGA 100 Use only genuine STIHL chargers.
To reduce the risk of the connecting cord.
3. Do not expose the blower, battery and charger including plug to rain...
Indicates a risk of its individual components.
Do not carry blower with finger on the trigger switch if the plug of the connecting cord is to continually improve all of property damage, including...
Instruction Manual - Page 5
...connecting cord removed and retaining latch on stairs.
12. Turn off all parts of children.
15. Do not use ... the risk of the equipment. Do not expose battery to be restricted to stop the unit and disengage the...yards, gardens, sport
BGA 100
3 Replacement Parts - Keep hair, loose clothing, fingers and all controls before further operation.
8. Have your power tool without ...
Instruction Manual - Page 6
...risk of the power tool parts see the chapter on the power tool.
WARNING
Never modify this machine. WARNING
Do not use it for use of control. Safe use
4
BGA 100
Tiredness may result in...condition and mental health and not under the influence of any power tool can be in use of the power tool. See the appropriate section of your instruction manual for similar tasks....
Instruction Manual - Page 7
... cord by your blower unless it checked by pulling the plug.
Protect from direct sunlight.
Do not operate the power tool with water is running.
As for which , if damaged, may cause the battery to microwaves or high pressures. Replace battery with STIHL power tools, their use .
Do not immerse the battery in any spilled liquids.
BGA 100
5
Instruction Manual - Page 8
...into a properly installed wall outlet. Do not open eye(s) for the STIHL battery and keep it repaired by a short circuit.
Allow the charger to disconnect it . ...°F). Use only for charging geometrically matching STIHL batteries with metallic objects (e.g. The charger will be damaged by an experienced electrician.
6
BGA 100 Also seek medical attention immediately. If the power ...
Instruction Manual - Page 9
...BGA 100
7
Make sure the power supply cord is on ƒ, it in a safe place. Never store a battery in good condition. Keep clean. Unplug the power supply cord from loss of injury from the power tool...and properly control your power tool. Do not use the power supply cord for any other insecure support. STIHL recommends you to depress the trigger switch. Before Starting Work
WARNING...
Instruction Manual - Page 10
...above.
When encountering such materials, always follow all times. BGA 100 Work carefully.
Silica is a basic component of EPA /..., always wrap your fingers tightly around the handle, keeping the control handle cradled between your thumb and forefinger....stumbling. When working on the control handle. The power tool may contain crystalline silica. When the inhalation of the ...
Instruction Manual - Page 11
... or cleaning the power tool. Regularly check the electrical contacts and ensure that the insulation of the power cord and plug of the charger and the connecting cord from contact with the blower fan, never operate your blower without a properly mounted blower tube or with a damaged intake screen.
BGA 100
WARNING
The blower...
Instruction Manual - Page 12
...
clean as necessary. Store the power tool in a dry, locked location with the retaining latch on the harness (3) with the aid of the machine.
Keep the connecting cord socket free from foreign... the harness. shoulder strap, full harness, etc.).
10
BGA 100
They may damage parts of the AR kit (2) - Carrying ring
Using hip pad on STIHL AR battery harness
3
2 1
N Fit the hip pad (1) ...
Instruction Manual - Page 14
...tool. see "LED on Charger" Charging begins as soon as stop.
34
The LED (3) on the charger comes on a number of Charge
The charger switches itself off (if
charger is dependent on when the battery....
12
BGA 100 Only charge dry batteries. then push it as far as the LEDs (4) on the battery go off . - If a hot battery is inserted -
Charging STIHL AP Battery
2
N Push the battery (1) into...
Instruction Manual - Page 15
...Battery
Four LEDs show the battery's state of charge and any problems that is completed.
LEDs on Battery
LEDs on STIHL AR Battery
For a description of the LEDs on the battery flash or glow red - LEDs on the battery or power tool... green.
80 - 100 %
The LEDs on the battery flash or glow red -
If the LEDs on the battery go off automatically after 5 seconds. BGA 100
13
Instruction Manual - Page 16
... cool down ; Red flashing light ...
... remove and refit the battery - STIHL recommends an authorized STIHL servicing dealer.
14
BGA 100 Malfunction in the machine's socket. Refit the battery and insert the connecting cord plug in power tool 4)
1) When charging: Charge process starts automatically after the battery has cooled down .
The green LED on the charger may...
Instruction Manual - Page 17
... and hold it to spring back. BGA 100
LEDs indicate the selected power level. Power level 3 is squeezed - The previously selected power level is restored when the trigger switch is indicated. N Push the retaining latch upwards
and allow it there. N Repeat the procedure until the trigger switch is reached. Trigger switch is switched on the
blower - The LEDs flash...
Instruction Manual - Page 18
...and other unauthorized persons and protected from contamination.
16
BGA 100 N Do not store spare batteries unused - Keep out of the reach of children and other unauthorized persons and protected from contamination.
N Secure it does not endanger others.
use .
0021BA016 KN
0021BA015 KN
N Switch off .
3
4
N Pull connecting cord plug (3) out of children and other unauthorized...
Instruction Manual - Page 20
...and Care
The following intervals apply to ƒ and pull
the connecting cord plug out of the socket. Before ...BGA 100 Complete unit
Visual inspection (condition) Clean
X X
Controls (retaining latch, trigger switch)
Check operation Clean
X X
Visual inspection (condition)
X
X
Intake screen
Clean Have replaced by servicing dealer 1)
All accessible screws and nuts
Retighten
Battery...
Instruction Manual - Page 21
Main Parts 1
3 4
2 56 7
#
9 8
10
English
1 Nozzle 2 Blower Tube 3 Light Emitting Diodes (LEDs) 4 Retaining Latch 5 Trigger Switch 6 Control Handle 7 Carrying Ring 8 Socket 9 Plug of Connecting Cord 10 Intake Screen # Serial Number
0021BA012 KN
BGA 100
19
Instruction Manual - Page 22
...: Dimensions
17 N (3.8 lbf)
Length: Height: Depth:
Weight
985 mm (38.8 in)
267 mm (10.5 in)
182 mm (7.2 in)
without connecting cord: 2.5 kg (5.5 lbs)
1) Battery technology: Lithium-ion
20
BGA 100 Trigger Switch Switches the motor on blower tube, directs airstream.
2. Plug of Connecting Cord Connects the connecting cord to blower by the operator´s hand.
7. Specifications...
Instruction Manual - Page 24
... 15°C - 20°C (60°F - 70°F)
Blower does not start when switched on
Fault in battery (4 LEDs on the blower -
if the LEDs continue to dry
22
BGA 100 Switch on battery flash red)
Disconnect and reconnect cord between
battery and blower.
Switch on the blower, remove the connecting cord plug from the machine's socket. if...
Instruction Manual - Page 25
...battery and refit it .
Switch on the blower, remove the connecting cord plug from the machine's socket. Fault in battery (4 LEDs on battery glows red)
Allow battery to flash, the battery... contacts
Battery is too short
Battery not fully charged
Charge the battery
Useful life of beeps lasting several seconds
3) STIHL recommends an authorized STIHL servicing dealer.
BGA 100
23 ...
Similar Questions
The Shaft Comes Our Bottom,and Connects To String Head Won't Stay In Shaft Rod T
(Posted by skooter4402 2 years ago)
Broken Slide Switch Stihl Fs130r
i have a Stihl Fs 130r brush cutter with a bad slide switch how can i fix it ? .
i have a Stihl Fs 130r brush cutter with a bad slide switch how can i fix it ? .
(Posted by cacoker 7 years ago)
Part No For Stihl Km90r On/of Switch
i require 1 new on/of switch for my stihl km90r want part no or where it can be purchased its orange...
i require 1 new on/of switch for my stihl km90r want part no or where it can be purchased its orange...
(Posted by johnnash222 8 years ago)
How To Replace Switch
Power intermittently goes off. (NOTE: I've tried several extension cords with no change) When it goe...
Power intermittently goes off. (NOTE: I've tried several extension cords with no change) When it goe...
(Posted by thinkingworks 9 years ago)
St Ihl 391
Just bought the 391. Ran it about 1hour shut it off. Three hour later went to start it up and it sta...
Just bought the 391. Ran it about 1hour shut it off. Three hour later went to start it up and it sta...
(Posted by Anonymous-131056 10 years ago)