Sharp CD-BA2600 Support Question
Find answers below for this question about Sharp CD-BA2600.Need a Sharp CD-BA2600 manual? We have 1 online manual for this item!
Question posted by Marlendigitals on April 7th, 2017
Power On
Current Answers
Answer #1: Posted by hzplj9 on April 8th, 2017 6:00 AM
When a button is pressed, the unit does not respond. Set this unit to the power stand-by mode and then turn it back on. If the unit still malfunctions, reset it. (Refer to step 3 under "If trouble occurs")
Caution: This operation will erase all data stored in memory including clock, timer settings, tuner preset, and CD program.
Before transporting the unit
1 Set the unit to the stand-by mode and turn the power on again.
2 If the unit is not restored in step 1, unplug and plug in the unit, and then turn
the power on.
3 If neither step 1 nor 2 restores the unit, do the following:
Press the ON/STAND-BY button to enter the power stand-by mode.
While pressing down the / button and the X-BASS/DEMO button, press
the ON/STAND-BY button until "CLEAR AL" appears.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CD button.
3 Press the OPEN/CLOSE button to open the disc tray.
Remove all CDs inserted in the unit.
4 Press the OPEN/CLOSE button to close the disc tray.
Make sure that "NO DISC" is displayed.
5 Press the ON/STAND-BY button to enter the stand-by mode, and then
unplug the AC power cord from the AC outlet.
You can downlaod the service manual from this link:
https://www.manualslib.com/products/Sharp-Cd-Ba2600-2987511.html
Related Sharp CD-BA2600 Manual Pages
Similar Questions
my cd play er goes to next disc after completing current disc. used to play same disc over and over ...
Can you assist?
on radio, the unit turns off every 15 min. tried all the different sleep settings, (30 +min time and...