Ridgid R4030 Support Question
Ridgid R4030 Support Question
Find answers below for this question about Ridgid R4030.Need a Ridgid R4030 manual? We have 1 online manual for this item!
Question posted by pkslsr on January 29th, 2013
How To Change Battary For Lazer
The person who posted this question about this Ridgid product did not include a detailed explanation. Please use the "Request More Information" button to the right if more details would help you to answer this question.
Current Answers
Related Ridgid R4030 Manual Pages
Operation Manual - Page 1
WARNING:
To reduce the risk of operation, and operator safety. Thank you for , it will give you years of rugged, trouble-free performance. TILE SAW
R4030
To register your RIDGID product, please visit:
http://register.RIDGID.com Pour enregistrer votre produit de RIDGID, s'il vous plaît la visite:
http://register....
Operation Manual - Page 2
English TABLE OF CONTENTS
Introduction...2 General Safety Rules...3-4 Specific Safety Rules...5 Symbols...6 Electrical...7-8 Features...9-10 Tools Needed...10 Loose Parts...11 Assembly...12-17 Operation...18-21 Adjustments...22-23 Maintenance...24-25 Warranty...26 &#...
Operation Manual - Page 3
... POWER OFF. These cords are NOT safety glasses.
SECURE WORK. All visitors should wear safety glasses and be kept a safe distance from tool before servicing, or when changing attachments, wheels, bits, cutters, etc., all instructions listed below, may affect its intended function. A wire gauge size (A.W.G.) of improper accessories may risk injury...
Operation Manual - Page 4
... NEVER TOUCH CUTTING WHEEL or other parts may cause the risk of accessories that accept the tool's plug.
DO NOT MODIFY the plug provided. Stay constantly aware of cord location ... keep it should be plugged into a three-hole electrical receptacle.
ONLY POWER THE TOOL WITH A GFCI (GROUND FAULT CIRCUIT INTERRUPTOR) PROTECTED OUTLET.
CHECK WITH A QUALIFIED ELECTRICIAN...
Operation Manual - Page 5
... line with the path of California to cause cancer, birth defects, or other reproductive harm. d) Use tool only with smooth edge cutting wheels free
of these instructions too. e) Replace damaged cutting wheel before servicing, when changing
cutting wheels, and cleaning. Wash hands after handling. Some examples of openings, grooves, and teeth. To...
Operation Manual - Page 6
... (cycles per minute
6 - SYMBOLS
The following symbols may be used on this tool.
Proper interpretation of the following signal words and meanings are intended to properly ground...NOTICE:
Without Safety Alert Symbol) Indicates important information not related to operate the tool better and safer.
SYMBOL
NAME
DESIGNATION/EXPLANATION
Safety Alert
Indicates a potential personal ...
Operation Manual - Page 7
...immediately. If the saw . A line intended only for electric current to be grounded. This tool must be provided on the cord's jacket. The wire with or without yellow stripes is 120... V, AC only (normal household current), 60 Hz.
A line that the tool will cause a drop in line voltage, resulting in serious personal injury.
In the event of a...
Operation Manual - Page 8
... the ground. The "drip loop" is that supplies power to the tool then unplug and examine for the presence of the tool's power cord and the extension cord are available at your local retailer....- If a protected outlet is not available, do not use the saw until an outlet can be changed or auxiliary protection can be obtained. These auxiliary protection devices are not on the ground. POSITION OF THE...
Operation Manual - Page 10
...safety rules.
7 in this warning could result in . This saw . SUBMERSIBLE PUMP - TOOLS NEEDED
The following tools (not included or drawn to -read indicator on upper portion of the project you are ...SQUARE Fig. 4 FEATURES
KNOW YOUR TILE SAW
See Figure 3. SPLASH GUARD - Before use of this tool. The sliding table allows the user to the cutting wheel. The safe use of this product requires ...
Operation Manual - Page 12
...Do not discard the packing material until you have carefully inspected and satisfactorily operated the tool. Finger tighten then lightly torque using wrenches. Once all screws are lightly...require customer installation.
Additional cutting wheels of the frame. Failure to heed this tool until assembly is misuse and could result in accidental starting and possible serious personal...
Operation Manual - Page 14
... in . Never use a wheel that have openings, grooves, or teeth on this product. WARNING:
Always install the inner wheel washer before placing wheel on this tool.
Place the cutting wheel onto arbor with the flats on the spindle. WATER NOZZLES
ARBOR
TILE CUTTING WHEEL
INNER WASHER
OUTER WASHER
ARBOR NUT...
Operation Manual - Page 16
FILL LINE
WATER RESERVOIR
Fig. 15
DRAIN PLUG
Fig. 16
16 - To change reservoir water: Unplug the saw. Remove the drain plug and ...drain plug and refill tray with clean tap water to get wet before moving the material into a
bucket. ASSEMBLY
FILLING/CHANGING THE WATER RESERVOIR
See Figures 15-16. Fill the water reservoir with clean water. TO CONTROL THE FLOW OF...
Operation Manual - Page 17
...; Do not remove the wheel guard.
• Never operate the tool without the wheel guard securely closed.
• Turn off tool, wait for the wheel to stop moving and disconnect the power to the tool before servicing, when changing cutting wheels, or cleaning.
• Never use wheels that have openings, grooves, or teeth on...
Operation Manual - Page 18
...saw turned OFF, remove the switch key.
The use of a power failure or when the tool is not in objects being thrown into the power source. SWITCH ON
SWITCH OFF
APPLICATIONS
You ...Figure 21. Remember that has a built-in serious personal injury.
This saw is sufficient to heed this tool.
English
Fig. 21 To turn OFF. SWITCH KEY REMOVED
LOCK KNOB
D-HANDLE
Fig. 20
WARNING:
ALWAYS...
Operation Manual - Page 19
... a small amount of tile until the wheel is cutting difficult material.
Debris from the cut on the tile using angle scale and tighten securely with tool function. Wait for
the wheel to get wet before moving the material into the wheel. Hold the material firmly against the sliding table fence...
Operation Manual - Page 22
... normal wear. Also, over a period of time, readjustment will probably become necessary due to be required.
ADJUSTMENT
WARNING:
Before performing any adjustment, make sure the tool is unplugged from the power supply and the switch is loose: Loosen the cam bolt nut. Insert hex key through the hole in...
Operation Manual - Page 24
... commercial solvents and may be damaged by their use only identical replacement parts. Tighten securely.
Dry off the tool. If operation is plugged into a bucket. Do not allow the water to comply with local regulations.
Replace... let brake fluids, gasoline, petroleum-based products, penetrating oils, etc., come in this tool are susceptible to a power source.
24 -
Operation Manual - Page 26
... MAKE NO WARRANTIES, REPRESENTATIONS OR PROMISES AS TO THE QUALITY OR PERFORMANCE OF ITS POWER TOOLS OTHER THAN THOSE SPECIFICALLY STATED IN THIS WARRANTY. One World Technologies, Inc. All warranty...for other than an authorized service center for three years following the purchase date of the tool. freight prepaid, or take it ; The authorized service center will be presented when ...
Similar Questions
Please Nead A Video,how To Oppen And Chang Circuito Board Trim Router R2401
Dears i nead a vídeo How to oppen and Chang Fix the cirquit board and a right position of the s...
Dears i nead a vídeo How to oppen and Chang Fix the cirquit board and a right position of the s...
(Posted by balsablanks 2 years ago)
How Do I Change Brushes
How do I change the motor brushes on a Ridgid R4030S tile saw
How do I change the motor brushes on a Ridgid R4030S tile saw
(Posted by dennis45227 8 years ago)
How Do I Change Blades?
I want to change blades on my saw and I can't find my manual.
I want to change blades on my saw and I can't find my manual.
(Posted by gtb53 11 years ago)