Miele PW 6065 Support Question
Miele PW 6065 Support Question
Find answers below for this question about Miele PW 6065.Need a Miele PW 6065 manual? We have 1 online manual for this item!
Question posted by russhopley on March 25th, 2014
Low Water Pressure Warning
water pressure warning comes up on panal and stops program checked water pressure
Current Answers
Related Miele PW 6065 Manual Pages
Operating and Installation manual - Page 1
US
M.-Nr. 07 509 320 Operating Instructions Washer PW 6065 Plus
To prevent accidents and machine damage read these instructions before installation or use. en -
Operating and Installation manual - Page 2
Supervisor level 63
2 Contents
IMPORTANT SAFETY INSTRUCTIONS 3 Guide to the washer 6 Control panel 6 Before using for the first time 9 Use 10 To cancel a program 15 To change a program 15 Adding/removing laundry during a wash program 15 Program guide 16 Program sequence 22 Spin speed 24 Extras 25 Timer 27 Favorites 28 Detergent 31 Cleaning and Care 34 Cleaning...
Operating and Installation manual - Page 3
...all instructions before using the appliance.
~ Check the packaging, the washer
and accessories for an installation in these ... Do not use or for electric current. However, under pressure. grounding conductor and a grounding plug. Frozen hoses may burst...including the following:
Read all local codes and ordinances.
~ WARNING - Please contact the Miele Technical Service Dept. In the event...
Operating and Installation manual - Page 4
...Connect the washer, to the
appliance while maintenance or repair work is flammable.
~ Remove the door before using the washing machine. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has...only completely isolated from each for damage. IMPORTANT SAFETY INSTRUCTIONS
~ Do not install or use a washer with a genuine Miele power cord.
~ Under certain conditions, hydrogen
gas may be produced in...
Operating and Installation manual - Page 5
...danger that children can access the machine. There is moving.
~ Do not tamper
with the controls. Keep children away from the washer when in use.
~ Only use the washing machine to
wash items which could ignite or explode. Contact with gasoline, dry-... no unattended
children can be held responsible for damage caused by the manufacturer to the wash water. SAVE THESE INSTRUCTIONS
5
Operating and Installation manual - Page 9
... be closed.
Language J
^ Select the desired language and confirm with the G button. The basic program "Cottons Uni."
Welcome screen
The Welcome screen shows when the washer is not possible to run without laundry and detergent to set the minutes and confirm.
Shipping struts
The display reminds the user to save the time of...
Operating and Installation manual - Page 11
... Load the laundry loosely into the drum.
- To prevent damage to pay. Use
2. See "Program guide".
^ If desired select "Extras" and/or a "Timer" start time with the respective submenus.
capacity.
See "Program Guide", ...drum door and the seal. For the lowest energy and water consumption load the washer to its max.
The drum light comes on. Select a "Favorite" by turning the jog ...
Operating and Installation manual - Page 14
... 10 minutes the washer calculates the water absorbency of day and the approximate program end is displayed.
- The drum light turns off after the program end.
"Anti-crease" and "End" will be selected or deselected after the program start.
- Check the drum for any missed pieces of a program
The anti-crease program starts when the laundry is displayed.
At...
Operating and Installation manual - Page 15
... or deselected up to the water and electrical consumption of laundry.
^ Close the drum door.
To change a program
After the program start .
^ Press the G button "Cancel". Canceling or changing a program and opening the door is higher than 131°F/55°C.
- The Extras "Starch Stop" and "Rinse Stop" can interrupt the programs (see "Program guide") to add or remove...
Operating and Installation manual - Page 22
...
Silks
e
d
e
2
- L
Disinfection*
(
a
(
3
L
L
Kitchen linen*
(
a
(
2
L
L
Table linen*
(
a
(
2
L
L
Curtains 1)*
(
a
(
3
-
L
d = low water level ( = middle water level e = high water level
a = normal wash rhythm b = Gentle wash cycle c = Woolens d = Silk
For program sequence explanations, see the following page. * Programs may vary depending on the offerings of...
Operating and Installation manual - Page 23
....
4) Pre-rinse To remove heavy soiling the laundry will be spun only after the program ends to prevent creases. The washer's sequence display will result. The washer determines the required water consumption for each load depending on quantity and water absorbency of the selected wash programs.
Special features in the program sequence:
Anti-crease
The drum continues to...
Operating and Installation manual - Page 24
...spin
The washer is not spun and remains soaking in "Settings Supervisor level" when activated by default to the maximum spin speed of the wash program.
- The water will ...Programs can be drained.
Reducing the final spin speed will be added in water. Without final spin
^ Select "Rinse Stop" from the submenu "Extras". The laundry is set by Technical Service.
To finish the program...
Operating and Installation manual - Page 26
... at the end of the wash program. See "Settings" for the selected program.
26 This will be selected.
If an Extra is not shown, it is not available for more information.
* "Intensive" and "Water plus" can be extended. Extras
Rinse Stop
Intensive* Water plus*
The washer stops after the last rinse, the laundry remains soaking in the submenu...
Operating and Installation manual - Page 28
...: If no selection is made in "Settings - Favorites
The washer has the option to save the most used wash programs on the selection the display shows one of the following submenus....menu
1 Cottons Uni. 2 Minimum iron 3 Delicates 4 Woollens H
140°F 104°F 104°F 85°F
Program selection... Cottons Uni.
140°F
1400 rpm
Duration 0:47 h
Extras H
Timer Y H
Save H
Back A H
...
Operating and Installation manual - Page 34
...cleaners, glass or all purpose cleaners. Remove the siphon tube from the compartment § and rinse under warm water. Clean the pipe on which the siphon tube is attached.
2. Detergent residue should be cleaned out regularly.
... machine or near its vicinity with a mild solution of the washer with a water or high pressure hose.
^ Pull out the detergent drawer as far as it will go. Cleaning the...
Operating and Installation manual - Page 38
... hoses.
-
The siphon tube is too low.
- Large residues of the pump process are normal. The flag symbol
"Settings-Language J". Check and clean the filters in the dispenser drawer. There are not resting evenly on a concrete base. Possible cause
Solution
- Cleaning the detergent
dispenser drawer". The water pressure is either Clean the siphon tube...
Operating and Installation manual - Page 53
... hoses. If the water pressure is below 15 psi (1 bar), there will not be installed.
Do not remove these filters except for a hot water connection.
^ Connect the cold water intake hose (blue mark) to a water line by a qualified plumber. Extension hoses Extension hoses (8' 2" or 13' [2.5 m or 4 m]) may be provided on the valve(s) and check for a complete...
Operating and Installation manual - Page 54
The water in single water lines from the hot water source cool faster when not in "Settings - The program times may be used. The hot water temperature at the water supply must be adjusted respectively. The same conditions for the hot water as for the cold water connection will lead to low electrical consumption during hot water operation.
The connection of...
Operating and Installation manual - Page 57
GSGV) Minimum water flow pressure Maximum water pressure Length of intake hose Length of power cord Drain height maximum (Drain pump) LED lighting for drum
33 7/16" (85 cm) 23 7/16" (59.5 cm) 28 3/8" (72 cm) 44 1/8" (112 cm) 240 lbs (109 kg) 613 lb [2778 Newton (approx. 278 kg)] 14.3 lbs (6.5 kg) dry laundry see...
Operating and Installation manual - Page 68
... default.
This option is set to "hot" by default. Low water pressure
If the water pressure is used , the washer must be selected.
If "Recycled water" is always below 14.5 psi this setting can be refitted accordingly. The water type for the program "Woolens, Silk, Curtains and Proofing").
The hot water intake will be only accessible at a wash temperature of...
Similar Questions
Miele Pw 6065 Service Mode
How to get into component test of miele pw 6065?
How to get into component test of miele pw 6065?
(Posted by cayubitcris89 1 year ago)
Hi Can I Please Get A Price On Door Seal Miele Professional Pw 6065
And is there a part Number And how do I order one it Grey with hole in top where light goes in as se...
And is there a part Number And how do I order one it Grey with hole in top where light goes in as se...
(Posted by Michaeledwards 2 years ago)
Miele W 3035 Touchtronic Washing Machine W Water How Drain2move
(Posted by pdlima63 3 years ago)
Miele Pw 6065 Display Flash And Go Blank No Respond
(Posted by nadybastille5 3 years ago)
Miele Pw 6065 Vario. Won't Spin Cycle.
no spin, tub moves easily by hand, no motor sounds, no fault code, just drain pump kicking on and of...
no spin, tub moves easily by hand, no motor sounds, no fault code, just drain pump kicking on and of...
(Posted by Peterdavidboyce 8 years ago)