Miele PW 6065 Support Question
Miele PW 6065 Support Question
Find answers below for this question about Miele PW 6065.Need a Miele PW 6065 manual? We have 1 online manual for this item!
Question posted by lehalomanov on November 20th, 2017
Drain Foult
machine is interrupted at the time of the program drain and appears drain fail. Iclean cpump filter, pipe drainage, all clean and alarm remains
Current Answers
Answer #1: Posted by Odin on November 20th, 2017 7:54 AM
Odin
Member since:
April 10th, 2010 Points: 41,236,630
Member since:
April 10th, 2010 Points: 41,236,630
Hope this is useful. Please don't forget to click the Accept This Answer button if you do accept it. My aim is to provide reliable helpful answers, not just a lot of them. See https://www.helpowl.com/profile/Odin.
Related Miele PW 6065 Manual Pages
Operating and Installation manual - Page 1
Operating Instructions Washer PW 6065 Plus
To prevent accidents and machine damage read these instructions before installation or use. en - US
M.-Nr. 07 509 320
Operating and Installation manual - Page 2
... using for the first time 9 Use 10 To cancel a program 15 To change a program 15 Adding/removing laundry during a wash program 15 Program guide 16 Program sequence 22 Spin speed 24 Extras 25 Timer 27 Favorites 28 Detergent 31 Cleaning and Care 34 Cleaning the washer 34 Cleaning the inlet hose filter 36 Frequently asked questions 37 A wash program cannot be started 37...
Operating and Installation manual - Page 3
... WARNING - The reliability of electric shock by a qualified electrician.
~ Before connecting the machine,
ensure that is equipped with the appliance - In the event of malfunction or breakdown,...electric shock or injury to persons while using the appliance.
~ Check the packaging, the washer
and accessories for an installation in a risk of damage. Please contact the Miele Technical ...
Operating and Installation manual - Page 4
... or use a washer with a genuine Miele power cord.
~ Under certain conditions, hydrogen
gas may be produced in these operating instructions.
~ Ensure power is not supplied to the water
mains. Do not use an open flame during this time, the gas is flammable.
~ Remove the door before using the washing machine. HYDROGEN GAS IS...
Operating and Installation manual - Page 5
...dangerous. SAVE THESE INSTRUCTIONS
5 Close supervision is necessary when the appliance is used near the machine or the controls. Any other applications may cause major injuries or the death of the child...to
wash items which could ignite or explode. Keep children away from the washer when in use.
~ Only use cleaning solvents on or in the drum. IMPORTANT SAFETY INSTRUCTIONS
Use
~ Do ...
Operating and Installation manual - Page 9
...Otherwise, remove them at this time then confirm. and confirm. Welcome screen
The Welcome screen shows when the washer is not possible to run without laundry and detergent to flush out...the program "Cottons Uni." shows.
^ Press the flashing button "Start". Once the program ends the washer can be correctly installed and connected before the first use .
Set the time of day. The basic program ...
Operating and Installation manual - Page 10
...laundry
General tips
- They should be washed separately several times before being included in a mixed load.
^ Empty all pockets.
,Foreign objects left in place before washing.
- Loose under-wires should be turned inside of powder detergent and warm water. Dark fabrics often bleed the first few times...should be fastened in
the machine.
^ Sort the laundry.
10 Comforter covers and ...
Operating and Installation manual - Page 11
... using the a button.
Select from the "Program selection" menu by pressing the respective direct select button.
^ Load the laundry loosely into the drum.
- For the lowest energy and water consumption load the washer to pay. capacity.
The drum light comes on.
If a coin mechanism operates the machine, please regard the displayed request to its...
Operating and Installation manual - Page 14
... the a "Door" button to laundry.
14 The drum light turns off after the program end. Press one of the following direct select buttons during the next wash cycle.
^ Check the folds of laundry. Button E "Timer" the time of the laundry. "Anti-crease" and "End" will count down in the washer may be drained away.
6. shrink or discolor...
Operating and Installation manual - Page 15
... a coin mechanism the machine will be locked after the program start.
^ Press the G button "Cancel". To change a program
After the program start . the water temperature is too high.
- the water level is higher than 131°F/55°C.
-
The program will be drained away.
^ Open the drum door before starting a new program. The time remaining will default to 5 minutes...
Operating and Installation manual - Page 18
.... 14.3 lbs (6.5 kg)
Items
For items which need only rinsing and spinning
Extras
Rinse Stop
Drain
To drain the water from the drum
Spin
max. 14.3 lbs (6.5 kg)
Select an appropriate spin speed
...Stop
Toweling 203°F to 140°F (95°C to cold
max. 7.7 lbs (3.5 kg)
Tip
-
Program guide
Denim 104°F (40°C) to 60°C)
max. 12.1 lbs (5.5 kg)
Tip
Wash dark ...
Operating and Installation manual - Page 23
...-rinse To remove heavy soiling the laundry will be opened at any time. Different program sequences and wash times will indicate the current cycle of the laundry.
After the spin the program starts with the water intake.
3) Outerwear The items will be spun only after the program ends to prevent creases. The washer's sequence display will result. Exception...
Operating and Installation manual - Page 24
...laundry is set by Technical Service. Selecting the final spin
The washer is not spun and remains soaking in "Settings Supervisor level" when activated by default to the maximum spin speed of the wash program... the door.
After the drain cycle the washer goes immediately into the anti-crease cycle.
24 To finish the program
Press the a button. Rinse spin
The laundry is spun after the final...
Operating and Installation manual - Page 37
... washer is dark and the "Start" light flashes slowly. As long as described in "Before using for the first time" were not followed. The Standby function will help you avoid placing a service call by identifying issues you may encounter while operating the machine:
A wash program cannot be started
Problem
Possible cause
Solution
The display remains...
Operating and Installation manual - Page 38
... and end of detergent remain in the water inlet hoses.
- There are unusual sounds coming from the drain pump.
Large residues of the pump process are not resting evenly on a concrete base. Check and clean the filters in the dispenser drawer. Frequently asked questions
General problems with the washer
Problem The washer shakes during the spin...
Operating and Installation manual - Page 41
Stop and allow it . If additional water remains in the machine (max. 6.5 gal [30 l]).
,Caution: If laundry has been
washed at a high temperature, the water draining out of the hose.
Machines with a drain pump
If the main drain hose is blocked
,Disconnect the machine from the
power supply.
^ Open the detergent dispenser drawer. Do not remove it to cool...
Operating and Installation manual - Page 42
... is extremely dangerous.
^ Remove the lint trap lid. ^ Remove any foreign objects or lint
from the filter.
^ Insert a screwdriver into the notch, beside the lint trap, pull it with your hand.
^ Return... freely by spinning it down. The door will leak out when the machine is used.
42 If the drain filter is not tightened securely water will now open.
^ Check that the impeller (in to remove...
Operating and Installation manual - Page 43
A moving drum is
stationary before reaching in to remove laundry. Machines with a drain valve
Frequently asked questions
Open the drum door
,Always make sure the drum is extremely dangerous.
^ Press the lever for the emergency drain down and hold until you hear no more water running out.
^ Insert a screwdriver into the notch beside the lever, pull it down. The door will now open.
43
Operating and Installation manual - Page 48
... not be
operated without the lid in place.
,Do not install the machine
directly next to or over an open floor drain or drain channel. Installation
^ Use the front washer feet and the rear excess end to transport the washer from vibrating off the stand during the spin cycle.
^ Install the unit on soft floor...
Operating and Installation manual - Page 53
Do not remove these filters except for leaks. Installation
Water connection
Maintenance
Cold water connection
A ...be provided on the valve(s) and check for cleaning.
53 The cold water hose (blue mark) is available the machine must be enough water available for a complete fill. The water intake hoses are equipped with screen filters.
Extension hoses Extension hoses (8' 2" or 13...
Similar Questions
Miele Pw 6065 Service Mode
How to get into component test of miele pw 6065?
How to get into component test of miele pw 6065?
(Posted by cayubitcris89 1 year ago)
Hi Can I Please Get A Price On Door Seal Miele Professional Pw 6065
And is there a part Number And how do I order one it Grey with hole in top where light goes in as se...
And is there a part Number And how do I order one it Grey with hole in top where light goes in as se...
(Posted by Michaeledwards 2 years ago)
Miele Pw 6065 Display Flash And Go Blank No Respond
(Posted by nadybastille5 3 years ago)
Miele Pw 6065 Vario. Won't Spin Cycle.
no spin, tub moves easily by hand, no motor sounds, no fault code, just drain pump kicking on and of...
no spin, tub moves easily by hand, no motor sounds, no fault code, just drain pump kicking on and of...
(Posted by Peterdavidboyce 8 years ago)
Miele W3033 Wash Machine Broken Plastic Drain Hose Conection At Rear Of Machine
(Posted by jcr8825 8 years ago)