Maytag MIR8890AS Support Question
Maytag MIR8890AS Support Question
Find answers below for this question about Maytag MIR8890AS.Need a Maytag MIR8890AS manual? We have 3 online manuals for this item!
Question posted by dianehaslam on March 15th, 2020
My Maytag Induction Range Oftentimes Will Beep Uncontrollably.
Almost since I have owned this Induction Range, the oven will continuously (every 5 to 10 seconds or so). The cooktop is unusable until the beeping stops. The only way I have been able to stop the beeping is to unplug the Range from the outlet, wait 30 seconds or so, then reconnect. Sometimes I will have to do this two, or three times until the beeping goes away. There are no error codes displayed on the control panel. I am now at the point where the beeping will not stop. I can disconnect it and leave it unplugged overnight, and the beeping resumes when I plug it back in. Please advise if you have a solution. Thank you.
Current Answers
Answer #1: Posted by Odin on March 15th, 2020 5:08 PM
Odin
Member since:
April 10th, 2010 Points: 41,236,680
Member since:
April 10th, 2010 Points: 41,236,680
This is unfortunately a common complaint about this appliance, and there seems to be no fix. (Sorry.) See https://www.amazon.com/Maytag-MIR8890AS-Stainless-Electric-Induction/product-reviews/B0075GB2SQ?pageNumber=2. You might have to replace your range.
Hope this is useful. Please don't forget to click the Accept This Answer button if you do accept it. My aim is to provide reliable helpful answers, not just a lot of them. See https://www.helpowl.com/profile/Odin.
Related Maytag MIR8890AS Manual Pages
Installation Guide - Page 1
... Anti-Tip Bracket 6 Electrical Connection - W10403811B Only 8 Verify Anti-Tip Bracket Is Installed and Engaged 12 Level Range 13 Warming Drawer or Premium Storage Drawer 13 Storage Drawer 14 Oven Door 14 Complete Installation 15 Moving the Range 15
IMPORTANT:
Save for local electrical inspector's use.
U.S.A. INSTALLATION INSTRUCTIONS 30" (76 CM) FREESTANDING ELECTRIC...
Installation Guide - Page 2
...on your appliance. WARNING
You can happen if the instructions are very important.
Slide range back so rear range foot is , tell you how to potential hazards that can be killed. This ...instructions. These words mean:
DANGER
You can kill or hurt you don't immediately follow instructions. Range Foot
WARNING
Tip Over Hazard A child or adult can result in death or serious burns to...
Installation Guide - Page 3
...: Observe all parts are included. ■ 3 - 10-32 hex nuts (attached to floor. Terminal lugs
A
B
A. This oven has been designed in this document.
■ Four-wire... listed strain relief. Only" section.
3
To install the anti-tip bracket shipped with ranges.
Additional Installation Requirements The installation of flooring may require longer screws to anchor bracket to ...
Installation Guide - Page 4
...max. A freestanding range may extend further forward depending on the left side frame behind the oven door)
IMPORTANT: Range must be installed next to top of frame behind
storage drawer or right side of cooktop, see NOTE* ...119.1 cm) overall height (max.) with leveling legs
screwed all the way in* C. 36" (91.4 cm) cooktop height (max.) with not less than ¹⁄₄" (0.64...
Installation Guide - Page 5
... electrical connection you are :
40-amp circuit 2 No.-8 conductors 1 No.-10 white neutral 1 No.-8 green grounding
Range Rating*
Specified Rating of the above code standards can be moved if servicing ...the outlet, have a proper outlet installed by a link. When a 4-wire receptacle of the oven door. Do not modify the power supply cord plug.
U.S.A. If connecting to the proper electrical ...
Installation Guide - Page 6
... B. If you have a stone or masonry floor, you must secure the range to children and adults.
1.
Remove oven racks and parts package from where it is taped inside oven. 3. Wrench or pliers D. Slide range back so rear range foot is moved. Do not operate range without anti-tip bracket installed and engaged. Do not remove the...
Installation Guide - Page 7
...Position mounting bracket against the wall in the cutout so that correspond to continue installing the range using the following illustrations. Rear position
Front position
Diagonal (2 options)
7 3.
B
Centerline... the Phillips screwdriver, mount anti-tip bracket to allow for final electrical connections. Move range close enough to opening to the wall or floor with the two #12 x 1&#...
Installation Guide - Page 8
... cover screws located on the back of the terminal block.
Remove plastic tag holding three 10-32 hex nuts from range.
4. UL listed strain relief
■ Tighten strain relief screw against the power supply cord.
8 Electrically ground range. Add strain relief. A
A. Use a new 40 amp power supply cord. Electrical Shock Hazard Disconnect power...
Installation Guide - Page 9
...to :
4-wire receptacle (NEMA type 14-50R)
A UL listed, 250-volt minimum, 40-amp, range power supply cord
4-wire connection: Power supply cord
4-wire direct
³⁄₈" (1.0 cm)
A...
Direct wire
disconnect
5" (12.7 cm)
3-wire receptacle (NEMA type 10-50R)
A UL listed, 250-volt minimum, 40-amp, range power supply cord
3-wire connection: Power supply cord
4-wire connection: Power...
Installation Guide - Page 10
...C
D
A. Securely tighten hex nuts. A
D B
C
A. 10-32 hex nut B. Direct Wire Installation: Copper or Aluminum Wire
This range may be connected directly to easily attach the wiring terminal block.
3....nut driver to connect the neutral (white) wire to the center terminal block post with ranges.
8. Line 2 (red)
D.
Replace terminal block access cover.
3-wire connection: Power ...
Warranty Information - Page 1
... Number 31617A
Standard Flat Oven Rack Order Part Number W10179196
Split Oven Rack Order Part Number W10205524
Max Capacity Oven Rack Order Part Number W10289145
Porcelain Broiler Pan and Grid Order Part Number 4396923
Premium Broil Pan and Roasting Rack Order Part Number W10123240 www.maytag.com/broilerpan
MAYTAG® ELECTRIC RANGE LIMITED WARRANTY
FIRST YEAR...
Use & Care Guide - Page 1
...en español, o para obtener información adicional acerca de su producto, visite: www.maytag.com Deberá tener a mano el número de modelo y de serie, que est&#...located on the oven frame behind the top right side of Contents
RANGE SAFETY 2 The Anti-Tip Bracket 2
FEATURE GUIDE 4 COOKTOP USE 6
Cookware 10 Home Canning 10 OVEN USE 10 Electronic Oven Controls 10 Sabbath Mode ...
Use & Care Guide - Page 4
...oven will sound at www.maytag.com for 5 seconds. It is closed, press the OVEN LIGHT keypad to minimize interference with a pacemaker or similar medical device should try to change the time. 3. This induction cooktop... Oven timer
Cooking start Range function
The Timer can be entered. The oven light will come on and off .
5.
NOTE: People with other devices in the "Cooktop ...
Use & Care Guide - Page 7
...10 seconds then remain on.
Use the following chart as a guide when setting heat levels. Touch OFF to turn off the cooktop when finished. Hot surface indicator "H"
If the cooktop... moves to 208V operation. A beep will light. Simmer
■ ...ways: 1. OR 3.
The power slider consists of previous illustration. Cooktop Control Lock: The cooktop can be used on a Surface Cooking Area...
Use & Care Guide - Page 10
...
IMPORTANT: This range has induction cooktop elements. This is not in use only flat-bottomed canners to avoid damage to the cooktop and elements.
...stop flashing once a suitable pan is not made using the cooktop. Each press of the Settings key will exit Settings and display the time of day is not the right size. Tones Tones are normal when the oven is used with an induction cooktop...
Use & Care Guide - Page 15
... the oven cavity walls, oven door and oven bottom for stubborn soils.
■ affresh™ Kitchen Appliance Cleaner and affresh™ Cooktop Cleaner may...oven control panel. 4. IMPORTANT: Do not use oven cleaners. A beep will remain in the display, and the Clean cycle will be used to clean the oven bottom, walls and door when the oven has finished the cycle and returned to stop...
Use & Care Guide - Page 16
...maytag.com.
Tiny scratches and abrasions ■ Use Cooktop Cleaner and Cleaning Pad for more information.
See "Accessories" section for scratches.
Do not use .
Do not use abrasive cleaners, steel-wool pads, gritty washcloths or abrasive paper towels. Unplug range... can be addressed with cleaner and cleaning pad.
OVEN RACKS Cleaning Method: ■ Steel-wool pad
...
Use & Care Guide - Page 17
... Cooktop control set .
Wait 20 seconds and turn power off to incorrect heat level Range is large enough.
Replace the fuse or reset the circuit breaker. www.maytag.com
Operation PROBLEM Nothing will operate
Cooktop will not operate
Cooktop cooking results not what expected
Oven will not operate
Oven temperature too high or too low Oven indicator lights flash Oven...
Use & Care Guide - Page 18
... on the control panel. If this continues, contact a qualified electrician. Tap water was changed from closing. Oven was not closed. Rack is beeping every 10 seconds.
Lower oven temperature 25°F (15°C), or move rack to bake burner, making baked items too brown on . Use aluminum foil to Celsius.
Range is calibrated incorrectly. The temperature set...
Use & Care Guide - Page 19
.... Cookware is required to obtain service under this limited warranty.
19
The sound may also continue to run even after the cooktop has been switched off, if the temperature it was purchased. LABOR NOT INCLUDED) In the second through tenth years from the date of original purchase, when this major appliance is fitted...
Maytag Knowledge Base Results
We have determined that the information below may contain an answer to this question. If you find an answer, please remember to return to this page and add it here using the "I KNOW THE ANSWER!" button above. It's that easy to earn points!-
The cycle time is not correct - Front-load washer
...answer. Front-load washer Display shows an error code - Front-load washer Why is HE High Efficiency detergent the only type of excessive suds or unbalanced load, the Estimated Time Remaining on : detergent type...Let the cycle continue. If you see "Sud" and the Done status light is revising the Estimated Time Remaining. See the animation below for a long time? If the ... -
Sabbath Mode - Oven
... end of day will go out at any time with 72 hours remaining and no audible beeps. If power fails, the oven will appear in Sabbath Mode with or without the oven on . Control lock - "SAb" will power up in the display and flash for five seconds. Sabbath Mode can be turned off or until... -
Display shows an error code - Top-load washer with Dispensers in Corners
... washer Display shows uL - Top-load washer Display shows Lid - Top-load washer Display shows dL - Display shows Sd - Top-load washer with Dispensers in Corners Display shows Ld - Top-load washer with Dispensers in Corners Display shows an error code - Top-load washer Display shows oL - Top-load washer Display shows dU - If the error remains on the display, ...
Similar Questions
Control Panel Problem
control panel went blank and a red light in the left corner was on and then faded out. It was beepin...
control panel went blank and a red light in the left corner was on and then faded out. It was beepin...
(Posted by aarrellin 6 years ago)
Model Mir8890as, All Cook Top Burners Fail To Operate Below Setting 5.
Cooktop touch control says p0 when first plugged in. I've let stove sit unplugged no change. Ran tes...
Cooktop touch control says p0 when first plugged in. I've let stove sit unplugged no change. Ran tes...
(Posted by stitools2 7 years ago)
Range Oven Shuts Down Control Panel And Light
The range works and then does not. The control panel stops showing temperature and the oven shuts of...
The range works and then does not. The control panel stops showing temperature and the oven shuts of...
(Posted by warren45482 10 years ago)
There Are No Beeps And No Display On Control Panel What Could Be The Problem
nothing lights up or makes any sound on control panel
nothing lights up or makes any sound on control panel
(Posted by richardjacksonreynolds75 10 years ago)
The Oven And Control Panel Do Not Work.
The stovetop works, but all of a sudden the oven and control panel stopped working.
The stovetop works, but all of a sudden the oven and control panel stopped working.
(Posted by steveminium 11 years ago)