LG WM3677HW Support Question
LG WM3677HW Support Question
Find answers below for this question about LG WM3677HW.Need a LG WM3677HW manual? We have 1 online manual for this item!
Question posted by Aireeek on July 30th, 2012
Lg Tromm Persistant Le Issues...
I have the dreaded LE error on my 5 year old washer as well. It started out as sporatic and unplugging the machine seemed to correct the problem. As time went on it got worse and I decided that I should give it a deep clean using the recommended Tide cleanser and and two our wash cycle using the diagnostic settings and finally a quick wash. Now as soon as I plug in the unit it displays the LE error and will not reset no matter how long the mahcine has been uplugged. I have replaced the Hall sensor twice, checked the Stator and wiring harness for proper resistance and connectivity with normal results. I get all lights on the display when put in diagnostics mode, but it immediately come up with LE within seconds stopping all other attempts to diagnose via the system.
Since I do have power I have my doubts about replacing the PWB unit and again the Stator checks out fine. Ideas?
Current Answers
Answer #1: Posted by Aireeek on July 31st, 2012 1:21 AM
Aireeek
Member since:
July 29th, 2012 Points: 50
Member since:
July 29th, 2012 Points: 50
Update... After blowing out the water return (located just inside, top of door) with compressed air I got a PE error which went away, followed by the return of the dreaded "LE" error ... or so I first thought. After a closer look, it turned out to be the "LE" with the second line in the first "E" ... or Thermistor error. After noticing the difference, I set the machine on it's side, located the offending sensor and unplugged, replugged it back in. Vola!! The machine is back in business! For how long? We'll just have to see.!
Thanks to all that have posted their fixess to these errors! Enjoy!
Related LG WM3677HW Manual Pages
Owners Manual - Page 2
... shower during rinse cycle. Automatic Wash Load Detection Automatically detects the load and optimizes the washing time. Child Lock The Child lock prevents children from pressing any button to Use the Washer ...
14
Maintenance ...
18
Troubleshooting Guide ...
21
Warranty ...
24
2 Important Safety Information ...
3
Specifications ...
4
Installation Instructions ...
5
Preparation Before...
Owners Manual - Page 3
...such a period, before using the washing machine, turn on or in risk of life. WARNING: Improper connection of the equipment-grounding conductor can result in the washer. if it will be followed to ....
• Do not place items exposed to cooking oil in your safety, the information in this time.
• Do not allow children to play on all local codes and ordinances.
• Do ...
Owners Manual - Page 4
... service technician in order to standpipe, inlet hose, or laundry tub
1) Per IEC 60456, washes the equivalent of a...Dry capacity • Spin speed • Permissible water pressure:
Front-loading Washing Machine 120V~ 60Hz 68.6 cm (W) X 75.6 cm (D) X 98.3 cm (H),...91 kg) 3.22 cu. ft. (IEC: 3.72 cu.
agitator washer. Drain Dispenser Door
Lower Cover Cap
Shipping Bolts
Power Plug • ...
Owners Manual - Page 5
...• Shipping bolts The appliance is fitted with all times. Take out the 4 bolts and braces by carpeting when the washing machine is transported, the shipping bolts and braces must not be...use.
• Whenever the appliance is installed
on a carpeted
floor.
Properly ground washer to outside weather conditions. Close the holes with the wrench supplied. Install or store ...
Owners Manual - Page 6
...,
• Power outlet
Must be within 60 in. (1.5 m) of either side of
the washer _srecommended to fully open the washer door,
• Washer dimensions
39"
(99 cm)
• Most installations require a minimum 4 in . (2.5 cm...Additional spacing of 1 in , (10 cm) clearance behind the washer.
• Minimum installation spacing for the minimum spacing allowed. Do not overload the outlet with more ...
Owners Manual - Page 7
... reducing device should not be used for an extended time, unplug it and shut off the water supply. • Connect the machine to a grounded outlet in accordance with the water inlet...water
Cold water tap
Sealing washer
• Water supply pressure must only be carried out qualified personnel.
Old hoses should be installed.
• Two Sealing washers are supplied with current wiring...
Owners Manual - Page 8
...to be left for children. Laundry tub
Hose Retainer
max. 96" (2.4 m)
• The drain hose should not be dangerous for an extended period of time (e.g. Keep all packaging from ... cable, and destroy the plug. Packaging material (e.g. This equipment is a risk of the washer.
• Properly securing the drain hose will protect the floor from children.
8 INSTALLATIONINSTRUCTIONS
...
Owners Manual - Page 9
... Check When pushing down the edges of the washing machine top plate diagonally, the machine should not move up towards of the base of the washer. under the feet.)
• Make sure that the appliance is perfectly level. (Use a leveling tool.)
• After the washer is uneven, adjust the adjustable feet as required. (Do...
Owners Manual - Page 11
...of the load. The detergent will drain into tile washer drum as it is important to the automatic dispenser following these steps:
1.
All laundry products can be adjusted for this compartment. After loading the laundry additives into the appropriate compartments.
3. Close the ... Prewash Detergent Compartment
• Add detergent to be added at the appropriate time for main wash.
Owners Manual - Page 12
... not exceed the maximum fill line.
• For powered detergent, remove both the liquid detergent box and insert.
• Powdered detergent will drain into the washer drum as it is flushed from the dispenser at the beginning of liquid or powdered detergent.
• When using liquid detergent, make sure the liquid...
Owners Manual - Page 14
...Power
• Use this button to 12 hours in one hour or press the button again to increase the delay wash time up to start of fabric and soil levels.
• Each cycle has a preset Water Temperature, Spin Speed, Soil Level, and Option...
0
0 LIGHT
OMOR E O!
0 LOW T£MR
WASH/ RINSE
SPIN SPEED
SOIL LEYE[
DRY
•
1. Delay Wash
• Allows the start /stop the washer.
1,,/
4.
Owners Manual - Page 16
...time you are not remove a load of clothes from washing to drying can handle a load of up to iron clothes-Less c) Cotton/Towels - Items must be able to tumble freely
• If you open door and remove load before dryer has finished its cycle, remember to press the START... in your dryer for manual drying. Dry
• This washer-dryer's automatical process from the dryer as soon as it stops...
Owners Manual - Page 17
... when an error has been detected. EST.TIME REMAINING
• This display shows: a) the estimated time remaining in the Main Wash Compartment. OPTION
1. Use powdered for better stain removal.
• Automatically provides a rinse.
5. Stain cycle
• Adds time to ensure the removal of the washer is operating.
Press and hold PRE WASH button for loads...
Owners Manual - Page 18
... _E " error message will blink on the control panel when water does not enter the dispenser. • If your machine.
Tighten the... may become clogged. At this time use a vessel to the left in the laundry. power destroy
cord to pull out...cover cap(_lL_).
18 Before cleaning When disposing young children
the washer interior, unplug the electrical of the appliance, cut off the water tap....
Owners Manual - Page 19
...; The washing drum should happen, set the washer for washing machine use.
• Descaler could contain components that...time the build-up . • Cleaning the Dispenser • The dispenser may need to be cleaned periodically due to laundry additive build-up of laundry.
• The washing drum • If you live in a hard water area, lime scale can damage part of your washing machine...
Owners Manual - Page 20
... and let washer spin for washing machines.
• Winterizing instructions
If the washer is stored in an area where freezing can be expelled. 6. Do not add laundry.
2O Try...Unplug electrical power cord, dry drum interior, and close door. 7. To remove antifreeze from the Dispenser. Close door. 5. Disconnect hoses from water supply and drain water from hoses. 3. Store washer...
Owners Manual - Page 21
... House drain pipes are in firm contact with automatic safety functions which detect and diagnose problems at an early stage and react appropriately. Excessive suds
•Too much detergent or ... hose. Clean the drain filter.
21 When the machine does not function properly or does not function at tap or washer. If sound continues, washer is probably out of the inlet hose. See Installation...
Owners Manual - Page 22
... fuse capacity.
After pressing the Start/Pause button, it corrected by the amount of laundry, water
pressure, water temperature, and other using conditions.
If the imbalance is too small to extract adequate water from the load. Clothes load is detected or if the
suds removing program operates, the wash time shall be achieved.
The...
Owners Manual - Page 23
...imbalance detection and correction system.
&#...starts. Straighten hose. Add 1 or 2 similar items to allow proper spinning.
• Is the door opened or not completely closed? Close the water tap. Check another tap in motor.
• The washer experienced a power failure.
Restart the cycle.
• Check water supply.
Fully open .
• Water inlet hose is not released, unplug...
Owners Manual - Page 24
...of sale to the service person at the time warranty service is good only to the original...FOR A PARTICULAR PURPOSE. Electronic Control Board: 2 Years from the date ("Date of Purchase") of ...the product.
Your LG Washing Machine will be repaired or replaced, at LG's option, if it... fuses or correct wiring, or correction of unauthorized repairs.
• Damages or operating problems that vary from...
LG Knowledge Base Results
We have determined that the information below may contain an answer to this question. If you find an answer, please remember to return to this page and add it here using the "I KNOW THE ANSWER!" button above. It's that easy to earn points!-
Plumbing Noises - LG Consumer Knowledge Base
...problem is that the appliance is creating cleaning problems. If it breaks the pockets of the parts inside the chamber Use it again, then wait two minutes before you buy it, if you need some detective work with time... valves close , this Category Allegiene Cycle and Steam Cycle info LG Front Load Washer: General FAQ Washing machine has an OE error code How does the child lock ... -
Washer/Dryer Combo: Takes too long to dry - LG Consumer Knowledge Base
... the interior of time required to dry. For washer/dryer combo machines, the drying capacity is smaller than it is too wrinkled Washing Machine: Leaking from the clothing before drying. / Washer/Dryer Combo Washer/Dryer Combo: Takes too long to dry Washer / dryer combo units take longer to perform the drying process. If the water supply is used to condense the... -
Washing machine has an IE error code - LG Consumer Knowledge Base
... attached to the machine correctly, it will prevent proper water flow to use in the washing machine? If the inlet hoses are filters on the back of the washing machine. Washing machine has an LE error code Washing machine has an OE error code Washing Machine: Water or suds Issues Washing Machine: PF and other debris from getting into the washer. Washing Machine: Odor Issues What is the...
Similar Questions
Lint Removal On Lg Wm3677hw
is there a place to check for lint removal on this model? I did not see it in the manual. The clothe...
is there a place to check for lint removal on this model? I did not see it in the manual. The clothe...
(Posted by summerfan42 9 years ago)
Lg Wm3431hw Or Lg Wm3677hw
could really use some information, i have the option to buy either of these models and i cant seem t...
could really use some information, i have the option to buy either of these models and i cant seem t...
(Posted by spaynepdx 10 years ago)
Recalls For Wm3677hw
Are there any recalls for the Tromm WM3677HW?
Are there any recalls for the Tromm WM3677HW?
(Posted by noteworthymusik 12 years ago)