Husqvarna Z246 Support Question
Husqvarna Z246 Support Question
Find answers below for this question about Husqvarna Z246.Need a Husqvarna Z246 manual? We have 2 online manuals for this item!
Question posted by drsousaraymond on August 25th, 2018
Loose Front Wheel
left front wheel is loose: it has lots of give up and down
Current Answers
Answer #1: Posted by Odin on August 25th, 2018 12:10 PM
Odin
Member since:
April 10th, 2010 Points: 41,236,680
Member since:
April 10th, 2010 Points: 41,236,680
Is this a caster wheel or an anti-scalp roller? (For an illustration of each, see https://www.manualslib.com/manual/913058/Husqvarna-Z-246.html?page=24#manual.) If the former, follow the instructions at the above link for Removal and installation. If the latter, follow the adjustment instructions on the same page. If the issue persists (or if you require further explanation), you'll have to consult Husqvarna: use the contact information here--https://www.contacthelp.com/Husqvarna/customer-service.
Hope this is useful. Please don't forget to click the Accept This Answer button if you do accept it. My aim is to provide reliable helpful answers, not just a lot of them. See https://www.helpowl.com/profile/Odin.
Related Husqvarna Z246 Manual Pages
Owners Manual - Page 3
... By Hand 23 MAINTENANCE 24 Maintenance Schedule 24 Battery 26 Safety System 27 Park Brake 27 Tire Pressures 27 Caster Wheels 28 Anti-scalp Rollers 28 V-belts 28 Deck Belt Removal 28 Adjusting the Mower Deck 29 Leveling deck 29 Cutting Blades 30 Blade replacement 30 Cleaning 30 LUBRICATION 31 Transmission 31...
Owners Manual - Page 4
...-knifing. Read the contents carefully before transporting on lawns and even ground without fail. A well-kept ...for more information. Safety requires good judgement, careful use in or on mower. Accident prevention regulations, other types of the machine and increase its resale...machine's resale value.
Lawn mowers and all who are documented. Use only approved repair parts to the design...
Owners Manual - Page 5
... only in specialized retail stores with the manufacturing number:
Manufacturing Number The machine's manufacturing number can be found on one of the valve covers. The wheel motors and hydrostatic pumps have these available when ordering spare parts. Before the product is stamped on the printed plate affixed to the engine compartment...
Owners Manual - Page 7
... of a child. Always look behind before dismounting.
• Never carry passengers. SAFETY
Safety Instructions
These instructions are for your view of age before operating a riding lawn mower.
WARNING! THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS...
Owners Manual - Page 8
...rocks, or other debris which can affect the stability of riding mower-related injuries. The machine could overturn the machine.
When using ... WARNING! Do not drive across .
• Watch for wheel weights or counterweights.
• Keep machine free of injury... wear gloves when handling the blades.
• Never wear loose clothing that can cause buildup to cool before storage. Do ...
Owners Manual - Page 13
... extra care when using the two steering controls. The machine can be damaged. By moving the mower.
If the left steering control is locked if the steering controls are in the slots for example, to engage the... before moving both levers being inwards out of the right wheel is integrated with the steering control levers. Steering Control Levers
CONTROLS
WARNING!
Owners Manual - Page 15
...bar. Bypass Linkages
The seat can be adjusted lengthways. To prevent burns, the engine should be engaged when pushing or pulling the mower.
Fuel Shut Off Valve
Transaxle bypass linkages must be shut off valve is located on each side of the rear of the unit... The fuel shut off and allowed to cool before the bypass linkage levers are located on the left hand side of the machine.
Owners Manual - Page 16
.... Do not store, spill or use engine or carburetor cleaners in the left tracking bolt until the unit noticeably starts drifting right.
5.
Environmentally adapted alkylate... to insure good cold weather starting. The tracking bolts act as an empty parking lot or open flame. Test operate unit by driving it run on both rear tires.... alcohol based fuel. If the mower is highly flammable.
Owners Manual - Page 17
... becomes comfortable with the machine. To turn in the Operation section). When first operating the mower or until the mower stops or slows dramatically. The left control lever controls the left wheel and cause the machine to turn to move the mower under its own power. To move forward in the reverse position, complete the turn...
Owners Manual - Page 21
...The total time taken is poorer because the wheels sink into the soft lawn, clumps build, and grass clippings fasten under the cowling.
• Hose the mower deck underside with a high cutting height ... Instructions Driving on Slopes in the opposite direction making left hand turns until the desired mowing result is not running. Make sure the mower is cooled and the engine is not too long ...
Owners Manual - Page 24
... refueling) Check the safety system Check for fuel and oil leakages Check/clean the engine's cooling air intake Check the mower deck Check for loose hardware (screws, nuts) Clean under the mower deck Start the engine and blades, listen for unusual sounds Check for damage Thoroughly clean around the engine Clean around belts...
Owners Manual - Page 25
... engine oil filter
Clean/replace the spark plugs
Replace the fuel filter Replace paper air filter 2)
Check the caster wheels (every 200 hours) Replace the air cleaner's foam pre-filter 2)
Check/adjust the mower deck Check the engine valve clearance 3) Perform the 300-hour service 3)
1) First change after 8-10 hours. Before performing...
Owners Manual - Page 28
...take care of the cutter housing pulleys and remove belt from wear. Pull the wheel out of the yoke and take the unit to help prevent scalping in normal...remove shields. 4. Push inward on both mandrel housings and secure with the mower on the engine shaft. 2. Check that may have any dirt or grass that wheels rotate freely. Deck Belt Removal 1. Tighten the belt guide and replace belt...
Owners Manual - Page 30
... whether a blade with a Husqvarna bolt if required. CAUTION! The sharpening of the mower deck. Avoid spraying engine and electrical components with cold water. Blade replacement 1. CAUTION!...from the mower blades.
Use protective glasses when cleaning and washing. Inspect the entire machine for loose or missing hardware.
30 Tighten blade bolt securely. 5. Restart the mower and engage ...
Owners Manual - Page 31
...must not be replaced. It is important to avoid getting lubricant on each set of wheel bearings.
12/12 Every year 1/52 Every Week 1/365 Every day
Lubricate with ... used to clean them with a grease gun on the belts or the drive surfaces of wheel bearings.
Front Wheel Bearings Lubricate 3-4 strokes with spirits.
When lubricating with a grease gun, 2-3 strokes per spindle...
Owners Manual - Page 32
...dull Driving speed too high Grass is faulty or has come loose Contact for the mower deck is uneven Blades are not fully inserted
Engine begins to ...stall or runs rough Uneven pressure on seat Faulty carburetor Clogged fuel filter or jet Throttle lever in the Cold Weather starting position Clogged ventilation valve on the left...
Owners Manual - Page 37
...mtr reading, stamp, sign
Delivery Service
Charge the battery
q
Adjust the tire pressure of all wheels to 15 PSI (1 bar)
q
Mount the steering controls in the normal position
q
Connect the...engine
q
Check that there is drive to both wheels
q
Check the mower deck adjustment
q
Check:
Safety switch for the park brake
q
Safety switch for the mower deck
q
Safety switch in the seat
q
...
Owners Manual - Page 39
...oil filter Clean/replace the spark plugs Replace the fuel filter Check V-belts Check / tighten caster wheel axle bolts (every 200 hours) Change the air filter's paper cartridge Change hydraulic pump oil ...hour service Perform the 50-hour service Perform the 100-hour service Check / adjust the mower deck Clean the combustion chamber and grind the valve seats Check the engine valve clearance Replace...
Parts Manual - Page 3
NOTE: All fasteners are Grade 5 unless otherwise specified. CONTENTS FRAME 4 ENGINE MOUNTING, GUARDS & MUFFLER 6 STEERING 8 IGNITION SYSTEM 10 BRAKE / LIFT 12 HYDRAULIC PUMP-MOTOR 14 WHEELS & TIRES 16 MOWER DECK / CUTTING DECK 18 SEAT 20 DECALS 22
Illustrations may or may not represent the actual assemblies and it is not recommended to use...
Parts Manual - Page 19
... 20-12 3
539 10 95-62 2
539 10 48-64 1
Description Deck w/ Safety Decals Orange Belt, Deck Blade, Hi-Lift Shield, Belt Right Shield, Belt Left Wheel, Gauge Keeper, Belt Pulley, Idler Pulley, Idler Pulley, Deck Spring, Deck Belt Spring, Torsion Coupling, Connect Port, Washout Baffle, Front Baffle, Front Right Bracket, Deflector...
Similar Questions
Mower Won't Start And Is New Since July 2021
mower won't start and I believe the levers aren't set right for parking brake.I don't understand how...
mower won't start and I believe the levers aren't set right for parking brake.I don't understand how...
(Posted by dilbeckcarmen 2 years ago)
Engine Shouts Down
when when pulling in direction lever engine shuts off
when when pulling in direction lever engine shuts off
(Posted by clydemattson 2 years ago)
What Is A 2012 Husqvarna Hu 775l Lawn Mower In Very Good Condition Worth ?
What is a 2012 Husqvarna HU 775L lawn mower in Very good condition worth ?
What is a 2012 Husqvarna HU 775L lawn mower in Very good condition worth ?
(Posted by kpcastles 7 years ago)
Brand New Z246 Used It Once Worked Great, Now The Blades Wont Engage.
(Posted by damiencavazos66 9 years ago)
My Husqvarnarz4623 Lawn Mower
My husqvarna lawn mower will not start. It wont even try to turn over or click.
My husqvarna lawn mower will not start. It wont even try to turn over or click.
(Posted by teresaandbryancates 9 years ago)