Husqvarna RZ5426 Support Question
Husqvarna RZ5426 Support Question
Find answers below for this question about Husqvarna RZ5426.Need a Husqvarna RZ5426 manual? We have 1 online manual for this item!
Question posted by GOLFERTOM12 on April 3rd, 2018
Adjusting Neutral
When Adjusting The Neutral Position For Each Control Lever Does The Engine Need To Be Running?it Make Since That It Would But The Youtube Vidio I Saw Did Not Specify That.
Current Answers
Answer #1: Posted by waelsaidani1 on April 3rd, 2018 11:28 PM
waelsaidani1
Member since:
May 12th, 2013 Points: 19,501,797
Member since:
May 12th, 2013 Points: 19,501,797
Yes Start the engine and set the throttle to full RPM. Full instructions here https://www.searspartsdirect.com/repair-guide/riding-mower-and-tractor/how-to-adjust-the-neutral-control-on-a-zero-turn-riding-mower.html
Related Husqvarna RZ5426 Manual Pages
Owners Manual - Page 1
Operator Manual
RZ5426 / 967003601
Please read the operator's manual carefully and make sure you understand the instructions before using the machine. Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine.The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty.
Owners Manual - Page 3
... 19 Ignition Switch 20 Choke Control 20 Fuses 20 Fuel Tank 21 Fuel Shut Off Valve 22 Cutting Height Adjuster 22 Bypass Linkages 22 Seat Adjustment Lever 23 Hour Meter 23 Tracking Knob 23 OPERATION 24 Training 24 Steering 24 Before Starting 25 Starting the Engine 26
Jumper Cables Use 29 Running 30
Operating On Hills...
Owners Manual - Page 5
... tree stumps, etc. Lawn mowers and all who are used in relation to avoid jack-knifing. The machine must be operated, maintained, and repaired by steering controls both contribute to change ...potentially dangerous if used for towed equipment. Never allow extra distance to the new owner. Make wide turns to the machine's normal driving direction.
Do not tow on the towed ...
Owners Manual - Page 12
...518
12 Never assume that children will remain where you last saw them.
• Keep children out of the mowing area...WARNING!
The American Academy of age before operating a riding lawn mower. Be extra cautious when driving on slopes
Children
Tragic accidents ... and while backing, look behind and down for another ride and be run over or backed over if a wheel is not alert to the presence...
Owners Manual - Page 14
...; Make sure that the equipment is in safe working condition.
• Never tamper with overly high engine speeds. Wash your skin, rinse immediately with manufacturer's recommended parts, when necessary.
• Mower blades...or fuel spillage and remove any adjustments or repairs with the engine running the engine with safety devices.
The machine must not be sure it works properly. ...
Owners Manual - Page 17
... Locations
4
3
2
5 1
5
6
7
8 9 10
11
1. Steering control levers 2. Seat adjustment lever 9. Hour meter 14. driven hydraulic pumps. Bypass Linkages 6. Blade switch 10. Choke control 13.
Transmission from the engine is fitted with a four-stroke overhead valve engine.
Fuses
12
13
14
8. Deck lift
8058-177
17
Fuel shut off valve 5. The rider is made via a belt...
Owners Manual - Page 18
... they can be adjusted. The machine can be achieved by which is pulled backward, the machine turns to the left. Forward 2. Reverse Motion control lever, right side
8011-79122
18
When both controls an equal amount forward or backward, the machine moves in the neutral position (N), the machine stands still.
Neutral slot, Neutral lock 4. CONTROLS
Steering Control Levers
The machine...
Owners Manual - Page 19
... the engine for best mower performance and battery charging.
Blade switch
8058-187
8058-134
8058-134
19
Parking brake released
Throttle Control
The throttle control regulates the engine speed ...control
Blade Switch
To engage the mower deck, pull the blade switch knob out. The mower blades are disengaged when the knob is a risk of the machine. Push the release button and pull the lever...
Owners Manual - Page 22
... to the muffler.
The mower deck's lifting lever
Bypass Linkages
The levers are measured from 1½"...levers are handled. WARNING! To prevent burns, the engine should be shut off valve in the CLOSED position
Cutting Height Adjuster...engine plate. CONTROLS
Fuel Shut Off Valve
The fuel shut off when the handle tab is turned perpendicular to the blade tip with the engine not running.
Owners Manual - Page 23
... the steering control levers in both rear tires. Rotate clockwise to increase the speed on and shut off automatically.
Rotate the knob counter clockwise (as viewed from the operation position) to decrease speed. Lengthways adjustment
Hour Meter
The hour meter displays the total operating time. Recommended air pressure is in motion.
When making adjustments, the lever under...
Owners Manual - Page 24
... start moving in a straight line. Adjust the engine speed to the furthest forward or reverse positions during initial operation. Push the control levers forward to turn While moving forward in a forward direction, first pull both control levers forward slightly. To turn in that direction. When first operating the mower or until the mower stops or slows dramatically. First time...
Owners Manual - Page 25
... sufficient fuel in the locked
(outer) neutral position.
8058-024
25 Set the deck cutting height by inserting the lift pin into the activated
position. • Both steering controls must be up into the desired cut height. Adjust the seat to the desired position. Lengthways adjustment
5. Read the sections on Safety and Controls before starting the machine.
2. Perform...
Owners Manual - Page 27
Move the steering controls outward to the middle position. Move the throttle to the locked (outer) neutral position.
6.
Place controls in neutral position
8058-186
Set the throttle
7. If the engine is cold, the choke control should be pulled up.
8058-148
Set the choke control
8058-148
27 OPERATION
5.
Owners Manual - Page 30
...5. Mower deck lifting lever
4. Move the steering controls inwards, out of the neutral position (N).
Parking brake released
3. WARNING!
OPERATION
Running
1. Make sure the work area is running, any attempt by the rotating blades. Release the parking brake by pulling out the blade
switch.
8058-187 8058-206
Set blade engagement and throttle control
8058-134
30 When the engine is...
Owners Manual - Page 31
... the parking brake. • Pull the control levers back to regain forward motion. • Make all turns slowly. OPERATION
Operating On Hills
Read the Safety Instructions Driving on hills. • If stopping is absolutely necessary, pull steering
controls into the neutral position and push to the outside of the mower and press forward to the center of...
Owners Manual - Page 34
... the machine falls off and allowed to drive, reverse the above procedure.
Make no adjustments without: • the engine stopped, • the ignition key removed, • the parking brake activated
8058-033
Left side bypass linkage, EZT locked in the bypass position.
4. Use extreme caution when loading the machine into a truck or trailer using...
Owners Manual - Page 35
... around belts, belt pulleys Check the tire pressures Check battery connections Sharpen3)/ Replace mower blades Clean the engine's cooling air intake 2) Clean the air cleaner's pre-filter 2) (foam) Clean the air cleaner's filter cartridge 2) (paper filter) Check/adjust the parking brake Inspect muffler/spark arrester
Before
After
At least once each year
Maintenance...
Owners Manual - Page 38
... parking brake. Make sure the engine stops when the park brake is on the lever, links or switch belonging to start the engine when one of the conditions is not met.
To adjust the parking brake, contact the Husqvarna service workshop.
Change the conditions and try again.
Faulty adjustment will result in the outer, locked neutral position.
3. If...
Owners Manual - Page 46
... not start
Starter does not turn the engine over Engine runs rough
Engine seems weak Machine vibrates
Cause
• Blade switch is engaged. • Steering controls are incorrectly balanced • Engine is dead • Poor contact of the battery terminal cable connections • Blown fuse • Fault in
the wrong position • Clogged fuel filter or fuel...
Owners Manual - Page 53
...'s safety switch Check that the right amount of oil is in the engine Adjust the position of the steering controls Fill with fuel and open the fuel shut off valve Start the engine Check that there is drive to both wheels Check the mower deck adjustment Check: The safety switch for the parking brake The safety switch...
Similar Questions
Having Trouble With My Hydraulic Pump-motor. I Put A New One On And Still Want M
(Posted by marvinbarfield744 2 years ago)
The Left Steering Is Messed Up. Will Not Turn. Help Please
(Posted by tstacy021 8 years ago)
My Husqvarnarz4623 Lawn Mower
My husqvarna lawn mower will not start. It wont even try to turn over or click.
My husqvarna lawn mower will not start. It wont even try to turn over or click.
(Posted by teresaandbryancates 9 years ago)
Serial Number Locaton ?
cannot find serial number on my Husqvarna RZ5426 lawn mower
cannot find serial number on my Husqvarna RZ5426 lawn mower
(Posted by rogerhumiston 9 years ago)