Husqvarna R 322T AWD Support Question
Husqvarna R 322T AWD Support Question
Find answers below for this question about Husqvarna R 322T AWD.Need a Husqvarna R 322T AWD manual? We have 2 online manuals for this item!
Question posted by brian52719 on May 1st, 2013
Need Belt Size For Transmission Drive For Husqvarna R 322t Awd.
Need belt size for transmission drive for Husqvarna R 322T AWD.
Current Answers
Related Husqvarna R 322T AWD Manual Pages
Owners Manual - Page 1
English Operator′s manual
Rider 220T Rider 322T AWD
Please read the operator's manual carefully and make sure you understand the instructions before using the machine.
Owners Manual - Page 2
... 22 Adjusting the parking brake Rider 220T 23 Adjusting the parking brake Rider 322T AWD 23 Checking and adjusting of throttle wire 23 Checking and adjusting the choke wire 24 Replacement of the cutting unit 29
Replacing the cutting unit belts 29
Service position for the cutting unit 30
Checking the blades 31...
Owners Manual - Page 3
... synchronisation between the front and rear wheels. (Only AWD-machines) See the workshop manual.
Pre-delivery service ...transmission's oil
tank. 7 Connect battery. 8 Fill with fuel and start engine. 9 Check that machine does not move in neutral.
10 Check:
Forward drive. Reverse drive... the engine. 6 Check that there is about : Needs and benefits of following the service schedule. ...
Owners Manual - Page 4
...Husqvarna Rider. Use
This ride-on mower is a number of the machine. In addition, there is designed to this machine. Please contact your machine is equipped with a hydrostatic transmission...unit and a patented articulated steering.
When you need spare parts or advice on safety and occupational .... For example, before driving the machine on a public road. Driving and transport on public...
Owners Manual - Page 7
...safety and occupational medicine, and all other generally recognised regulations on conventional lawns and other cleared and leveled ground without obstacles, as specified... riding mower-related injuries. Use in conjunction with accessories supplied by the manufacturer also constitute essential elements of driving a vehicle. Towing
If your machine has a hydrostatic transmission you ...
Owners Manual - Page 9
KEY TO SYMBOLS
Switch off the engine and take off the ignition cable before driving
The following labels are on the machine
English - 9 If the engine is cold, use the choke Release the parking brake before repairs or maintenance Check the engine's oil level Check transmission oil level Lift up the cutting unit Apply the parking brake.
Owners Manual - Page 10
... 11
12
13 14
15
16
What is what on the ride-on mower
1 Speed limiter for driving forward 2 Speed limiter for reversing 3 Lifting lever for the cutting unit 4 Cutting height adjustment lever 5 Ignition lock 6 Throttle trigger 7 Choke control 8 Counter: 322T AWD
9 Cover lock 10 Parking brake 11 Lock button for parking brake 12...
Owners Manual - Page 14
...observe local road traffic regulations before starting.
• Never make repairs before transporting or driving the machine on the machine. frame or rear wagon. Take extra care when loading it in... and maintain as required.
• Reduce the risk of fire by tensioning the belts towards the back and the front of governors. Ensure you run over or into anything.
...
Owners Manual - Page 15
... quality product that branches do not
! This operator's manual describes Rider 220T and Rider 322T AWD. Pedal (1) is a risk of the blades. One pedal for driving forward and one for cold starting the lever is handled by a hydrostatic transmission, which allows variable variation of the speed by using the pedals. Choke control
The choke...
Owners Manual - Page 16
...-
for the cutting unit
The lift lever is used to rotate (mowing position). Counter: 322T AWD
The chronometer shows how many hours the engine has been running but the ignition is switched on...English
WARNING! Petrol is not registered. PRESENTATION
Lifting lever for a small mound in the lawn.
If the lever is pulled backwards the unit is moved forwards the unit will automatically ...
Owners Manual - Page 17
... be pulled out in order for the machine to the drive system.
- Control depressed, drive system engaged. • Clutch control, front axle
The ...drive the machine with both clutch controls pressed in.
• Clutch control, rear axle
Release lever Rider 220T
• Pull out the control to the end positions, do not use an intermediate position. Clutch control Rider 322T AWD
Rider 322T AWD...
Owners Manual - Page 18
...
18 -
STOP
START
9 Set the required engine speed with the throttle control.
Rider 322T AWD have one control for the front axle and one control for the rear axle.
2 ... minutes before subjecting it to locked position (transport position) and apply the parking brake.
Driving
Before starting
• Read the safety instructions and information concerning the placement of controls and...
Owners Manual - Page 19
... pole (-) on the fully charged battery.
• Connect the other end of the drive belts is used for emergency starting, follow the procedure below:
IMPORTANT INFORMATION Your Rider is removed...required speed is too weak to the mowing position. Do not use your Rider battery to drive backwards. 1 2
3 Select the required cutting height (1-10) with negative earth.
IMPORTANT INFORMATION...
Owners Manual - Page 21
...this operator's manual
WARNING!
Lubricate the belt adjuster 1) Lubricate joints and shafts1) Adjust the brake Check the V-belts Check the cooling fins on the hydrostatic transmission Checking the transmission oil level Checking and adjusting the choke ... or every 200 hours. 6)Conducted by authorised service workshop. 7)Only 322T AWD first change the oil 6,7) in the tyres.
Owners Manual - Page 23
... (2) until the play in the cable is taken up .
4 Tighten the locking nuts (1). 5 The brake should be affected.
English - 23 Adjusting the parking brake Rider 322T AWD
Check that the correct engine speed is achieved at full throttle. they should be adjusted according to the throttle control and that the parking brake...
Owners Manual - Page 26
... the machine can be 60 kPa (0.6 bar / 9 PSI) all round. Maintenance
Replacing the light bulbs: 322T AWD
For information about the bulb type, see Technical Data. 1 Unscrew the two screws holding the cover on the...the tyre pressure
The tyre pressure should be reduced to the machine
26 - To improve driving the pressure on the rear tyres can be put into operation again. English Main fuse
The...
Owners Manual - Page 28
Maintenance
8 Fit the drive belt around the drive wheels of bathroom scales under the cutting unit's frame (front edge) so that the ...the scales. English Checking and adjustment of the belt tensioner wheel.
4 Pull out the cutting unit.
9 Hook up the belt may break and
cause personal injury.
1 Carry out points 1-6 to avoid
! Make sure the belt is adjusted using a screw and spring on...
Owners Manual - Page 30
... place in the reverse order. Wear protective glasses when
!
WARNING! The spring
which tensions up the cutting unit. trapping your hand.
6 Remove the drive belt and place it in the belt holder.
7 Grip the front edge of the unit and pull forwards until it stops.
3 Remove the front cover.
8 Lift the unit until...
Owners Manual - Page 33
...*Grease from the right-hand side under the engine's lower belt pulley, until grease is used. Lubricating the belt adjuster
The belt adjuster should be vented before the machine is forced out. ... must be changed by an authorised service representative, as described in the transmission's oil tank.
English - 33 Rider 322T AWD Fill if necessary with oil Synthetic 10W/50 The oil and fi...
Owners Manual - Page 36
...Nominal engine output, kW (see note 1) Displacement, cm3/cu.in the seat, m/s2
0,7
0,7
Transmission
Brand
Tuff Torq K46
K 574 KTM 10L
Oil, class SF-CC
SAE 10W/40
SAE 10W/...deviation) of 0.2 m/s2 (steering wheel) and 0.8 m/s2 (seat).
Technical data
Dimensions
Rider 220T
Rider 322T AWD
Length without cutting unit, mm/ft
2020/6,61
2020/6,61
Width without cutting unit, mm/ft
890/2,92...
Similar Questions
V Belt Sizes
What are the sizes of the rear drive belt
What are the sizes of the rear drive belt
(Posted by Rightstandingcontracting 9 months ago)
I Have A R 322t Awd With A Snowblower. When I Lift The Snowblower It Does Not St
I have a r 322t awd with a snow blower, when I lift the snowblower it does not turn off. Why is this...
I have a r 322t awd with a snow blower, when I lift the snowblower it does not turn off. Why is this...
(Posted by mcludwigsen 3 years ago)
Rider 322t Awd V Belt Specs
Tractor V Belt Specifications, need to replace
Tractor V Belt Specifications, need to replace
(Posted by arminquickert 8 years ago)
Need To See A Drive Belt Diagram On Rz46 Belt Broke Need To Replace
(Posted by dickiebr 9 years ago)