Husqvarna M-ZT 61 Support Question
Husqvarna M-ZT 61 Support Question
Find answers below for this question about Husqvarna M-ZT 61.Need a Husqvarna M-ZT 61 manual? We have 3 online manuals for this item!
Question posted by Streetboss2006 on March 31st, 2016
White Compartment That Says 20w 50
this is my question how much is needed here.... Not the motor oil,
Current Answers
Answer #1: Posted by Odin on March 31st, 2016 8:24 AM
Odin
Member since:
April 10th, 2010 Points: 41,236,630
Member since:
April 10th, 2010 Points: 41,236,630
Fill the engine with new oil to the bottom of the fill tube threads. Check the level with the dipstick. Replace the oil fill cap securely when the oil level is FULL. Mpre details at http://bit.ly/1VVpHiU.
Hope this is useful. Please don't forget to click the Accept This Answer button if you do accept it. My aim is to provide reliable helpful answers, not just a lot of them. See https://www.helpowl.com/profile/Odin.
Answer #2: Posted by TechSupport101 on March 31st, 2016 8:24 AM
TechSupport101
Member since:
May 24th, 2013 Points: 12,171,275
Member since:
May 24th, 2013 Points: 12,171,275
Hi. The manual page linked 2 mentions 20W50. Infact, that seems to be the only page of the manual that makes reference to 20W50. On the steps in the same page, 2 quarts is suggested. And 20W50 Motor oil is mentioned in the same steps (Step 10)
Related Husqvarna M-ZT 61 Manual Pages
Parts List - Page 2
... motors and hydrostatic pumps have these available when ordering spare parts.
Printed in service questions, warranty issues, etc., please consult the following professional:
This manual belongs to the machine with the manufacturing number:
Engine
Transmission
Manufacturing Number
The machine's manufacturing number can be found on the printed plate affixed to the engine compartment...
Parts List - Page 17
... 2 ZERK ¼ -28 ANGLED 12.. 575 622201 2 TIRE, 13 x 6.50 13.. 539 102889 2 COTTER PIN 1/8 x 2 14.. 539 912234 4 VALVE STEM...109554 2 WASHER ½ FLAT
17 QTY. QTY. DESCRIPTION
1.. 575 348701 2 TIRE ASSY, CASTER 2.. 575 622101 2 RIM 6 x 4.50 CASTER 3.. 539 105307 4 BEARING, ROLLER 4.. 539 102484 4 BEARING, FLANGE 5.. 539 102543 4 BEARING 6.. 575 329203 2 YOKE, CASTER,...
Operation Manual - Page 3
... Adjusting the Mower Deck 42
Leveling deck 42 Anti-scalp Rollers 43 Caster Wheels 43 Hardware 43 Cleaning 44 ZT-3400 Powertrain 44... LUBRICATION 45 Lubrication Schedule 45 Wheel and Deck Zerks 46
Front Wheel Mount 46 Front Wheel Bearings 46 Deck Spindle 46 Transaxle (Transmission) Fluid Change 47 TROUBLESHOOTING GUIDE 48 STORAGE 50 Winter Storage 50 Service 50...
Operation Manual - Page 5
... the machine.
The manufacturer's directions concerning operation, maintenance, and repairs must only be operated, maintained, and repaired by all power equipment can be carefully followed. Lawn mowers and all who are subject to the operator and a hydrostatic transmission regulated by the manufacturer.
A control panel easily accessible to change without notice. The following...
Operation Manual - Page 6
... an affixed serial plate. This ensures that you need spare parts or support in service questions, warranty issues, etc., please consult the following ...Please have a barcode decal affixed at the rear.
6
Engine
Transmission The wheel motors and hydrostatic pumps have the type designation and serial number available when ordering spare ...compartment. The manufacturer's type number (Model).
Operation Manual - Page 10
... cancer, birth defects, or other debris, causing buildup to occur.
• Clean any oil or fuel spillage before storage. Do not use the machine in a large percentage of alcohol..., eye protection, and hearing protection. These operators should evaluate their ability to operate the riding mower safely enough to cool before operating or storing the machine.
• Allow machine to protect...
Operation Manual - Page 12
... area and in the watchful care of Pediatrics recommends that may suddenly appear in the past may block the view of age before operating a riding lawn mower. Children who have been given rides in the mowing area for small children.
• Never carry children, even with safe machine operation.
Operation Manual - Page 13
.... The engine must not be started until fueling is not possible, refuel such equipment with plastic liner. Do not use and leave space for the mower deck's drive belt is spilled on a water heater or other sources of static electricity by touching a metal surface.
• Never fill containers inside a vehicle or...
Operation Manual - Page 33
... mowing result will be raised into the soft lawn, clumps build, and the grass clippings fasten under the cowling.
• Hose the mower deck underside with a high cutting height and ... is used without negatively affecting the mowing result.
• The finest lawns are obtained by the blades. WARNING! The lawn becomes more even and the grass clippings more evenly distributed over 6" ...
Operation Manual - Page 35
...oil level (every refueling) Check the safety system Check for fuel and oil leakages Check/clean the engine's cooling air intake Check the mower deck Check for loose hardware (screws, nuts) Clean under the mower... manual
35 When operating with a heavy load or at high ambient temperatures, replace every 50 hours.
2) In dusty conditions, cleaning and replacement are required more often.
3) Performed...
Operation Manual - Page 36
...filter 2) Change the hydraulic oil (every 500 hours) Replace the hydraulic oil filter (every 500 hours) Dismantle and inspect starter 3) (every 500 hours) Check/adjust the mower deck Check the engine valve...it
cannot come in contact with a heavy load or at high ambient temperatures, replace every 50 hours.
2) In dusty conditions, cleaning and replacement are required more often.
3) Performed by ...
Operation Manual - Page 37
... periodic charging of charger
IMPORTANT INFORMATION
Do not attempt to contact both terminals at :
50 Amps 30 Amps 20 Amps 10 Amps - STANDARD BATTERY
12.6V 12.4V 12.2V...wrenches for charging times. MAINTENANCE
Battery
The mower is not necessary. WARNING! Clean terminals and battery cable ends with a maintenance free battery and does not need servicing. Coat terminals with remaining hex bolt...
Operation Manual - Page 45
p Change engine oil every 50 hours. For daily use high grade molybdenum disulphide grease. Wipe away excess grease after ...grease, unless otherwise stated, use , the machine should be used to clean belts.
45 When lubricating with grease gun Oil change
Filter change Level check
* Change hydraulic drive filters.
General Remove the ignition key to avoid getting lubricant on the...
Operation Manual - Page 47
...mower and the mower on the opposite side.
7. Torque screws to disposal. Place used oil in appropriate containers and dispose of new oil to vent during oil fill.
9. Place an oil drain pan (12" or more diameter and 8 qt. Fill with oil... motor oil until the FULL COLD line is reached ...longer life, an oil filter change
2 1
8019-010
47 Top port plug ZT-3400 filter change ...
Operation Manual - Page 50
...50 WARNING! It is very flammable and can occur during storage. To ready the machine for long periods of engine oil into an approved container. Touch up at the end of the mower...to run until the carburetor is drained of properly.
4.
Thoroughly clean the machine, especially under the mower deck. Handle the fuel with open flames, sparks, or a pilot light such as regards to ...
Operation Manual - Page 54
...
Nm
ft./lbs
Nm
ft./lbs
Nm
¼
9
12
13
18
5/16
18
24
28
38
24
33
3/8
31
42
46
62
40
54
7/16
50
68
75
108
½
75
102
115
156
9/16
110
150
165
224
5/8
150
203
225
305
¾
250
339
370
502
7/8
378
513
591...
Operation Manual - Page 55
... requirements for any of the states, (California emission rules etc.). Certificates can also be supplied with the machine at delivery or written in the engine compartment stating that the machine will fulfill the requirements. CONFORMITY CERTIFICATES
USA requirements Labels are valuable documents.
55 Take care of them as they are placed...
Operation Manual - Page 59
SERVICE JOURNAL
Action
50-Hour Service
Clean debris from mower Check engine oil level Check the tire pressures Check underside of deck Inspect deck pulleys Check/clean the engine's cooling air intake Check safety system Check seat belt Check ROPS Check fuel system for leaks Inspect safety guards and shields Check brake adjustment
Date, mtr reading, stamp, sign
59
User Manual - Page 11
..., and latch. g. Before each use check for loose fasteners. BLADE CARE For best results mower blades must be sticky and adhere to the walls of the flow path causing clogging.
•...
TIPS FOR IMPROVED BAGGING • Follow the mower operation instructions in you
mower operator manual.
• When operating the grass catcher on a lawn where grass and leaf bagging equipment has not ...
User Manual - Page 13
...48.. 539 110321 2 BOLT 3/8-24 x 1¼ HEX GR 8 49.. 539 990302 8 SCREW ¼-20 x 3/8 THD FRM 50.. 539 976952 1 SCREW #10-24 x 5/8 MACH 51.. 539 130313 6 NUT 5/16-18 TEE 52.. 539 130314 9 NUT ...990717 9 NUT 5/16-18 HEX NYLOC 59.. 539 990118 2 WASHER 3/8 SLW 60.. 532 140296 2 WASHER, HARDENED 61.. 539 108084 1 WASHER 3/16 x ¾ x 16 GA 62.. 539 109552 1 WASHER 3/16 SLW 63.. ...
Similar Questions
Location Of Battery On A Hu675fe Lawn Mower.
Where is the battery located on a Husqvarna HU675FE lawn mower
Where is the battery located on a Husqvarna HU675FE lawn mower
(Posted by wrileythree 3 years ago)
White Compartment
i think the white compartment that has a black lid reading 20w50 is the transmission oil on my mzt61...
i think the white compartment that has a black lid reading 20w50 is the transmission oil on my mzt61...
(Posted by Streetboss2006 8 years ago)
White Compartment Behind Seat
the area where it requires 20w 50 says hot or cold but it appears to be empty how much is needed to ...
the area where it requires 20w 50 says hot or cold but it appears to be empty how much is needed to ...
(Posted by Streetboss2006 8 years ago)
Container Behind Seat
how much 20w 50 oil do I need to put in cause it appears to have very little in it
how much 20w 50 oil do I need to put in cause it appears to have very little in it
(Posted by Streetboss2006 8 years ago)
My Husqvarnarz4623 Lawn Mower
My husqvarna lawn mower will not start. It wont even try to turn over or click.
My husqvarna lawn mower will not start. It wont even try to turn over or click.
(Posted by teresaandbryancates 9 years ago)