Husqvarna MZ 6128 Support Question
Husqvarna MZ 6128 Support Question
Find answers below for this question about Husqvarna MZ 6128.Need a Husqvarna MZ 6128 manual? We have 2 online manuals for this item!
Question posted by jenniferbuchanan223 on July 23rd, 2019
Level Control Pivot
trying to put on a level control pivot on a mz6128 husqvarna zero turn
Current Answers
Answer #1: Posted by hzplj9 on July 23rd, 2019 2:09 PM
hzplj9
Member since:
June 25th, 2012 Points: 4,875,670
Member since:
June 25th, 2012 Points: 4,875,670
Check the user manual for information on the maintenance of your machine. It is available here:
https://www.manualslib.com/manual/960497/Husqvarna-Mz-52.html
I could not find any reference to a 'level control pivot' in the user guide. If you could resubmit another question with an indication of the item that you need information on refitting we may be able to help.
Regards
Related Husqvarna MZ 6128 Manual Pages
Owners Manual - Page 3
... of Gasoline 13 General Maintenance 14 Transport 16 Towing 16 Spark Arrestor 16 CONTROLS 17 Control Locations 17 Motion Control Levers 18 Hour Meter 19 Tracking 19 Parking Brake 20 Blade Switch 20 ...37 Deck Belt 38 Pump Belt 39 V-belts 39 Cutting Blades 40 Adjusting the Mower Deck 41
Leveling deck 41 Anti-scalp rollers 42 Caster Wheels 43 Hardware 43 Cleaning 43 LUBRICATION ...
Owners Manual - Page 5
...Lawn mowers and all who are provided with delivery.
This manual is easily accessible to the operator and a hydrostatic transmission regulated by steering controls... both contribute to the machine's normal driving direction.
Continuous dedication to improve our products require that service and repair work are incorrect. Make wide turns... purchasing a Husqvarna ride-on public...
Owners Manual - Page 13
...and exhaust system to cool at least two (2) minutes before each use and leave space for the mower deck's drive belt is spilled on the ground. Safe Handling of ignition.
• Use only ... are explosive.
• Extinguish all times until problem has been resolved.
• Check the fuel level before refueling.
• Never fuel the machine indoors.
• Never store the machine or fuel ...
Owners Manual - Page 16
... or trailer by hand.
This mower is equipped with an internal combustion engine and should not be lifted by driving up ramps of control. Be extra cautious when it...to stop.
SAFETY
Transport
• The machine is available through your authorized Husqvarna dealer. WARNING! Activate the parking brake, turn off the fuel supply, and fasten the machine with approved fastening devices,...
Owners Manual - Page 17
... 8. Blade switch
12
11
10
10. Seat adjustment lever 11. Motion control levers 2. Hydro release levers
6. Using the left and right steering controls, the flow is made via belt-driven hydraulic pumps. Right tracking bolt...thereby the direction and speed.
3
2
5 1
13 5
6
78
9
1. CONTROLS
This operator's manual describes the Husqvarna Zero Turn Rider.
Ignition switch 7.
Owners Manual - Page 18
... position.
Use extra care when using the two steering controls.
Neutral slot, Neutral lock 4. Zero turn very rapidly if one steering control is moved backward behind the neutral position) and carefully moving one control backward (behind the neutral position. Steering controls
8058-042
WARNING! The steering controls can be moved forward or backward about a neutral position...
Owners Manual - Page 19
... clockwise to increase the speed on and shut off automatically.
Recommended air pressure for the motion control levers when in both rear tires. For preliminary tracking adjustment, move unit to an open, unobstructed... such as limiting device for the rear tires is 15 psi (1 bar).
1. Tracking
If the mower is one hour before and one hour after the interval. The CHG OIL icon will flash CHG ...
Owners Manual - Page 20
... the blade switch knob out. Turn the key clockwise to start and stop the engine. Pull the lever backward to activate the brake and push forward to start the engine.
The mower blades are disengaged when the knob is placed on the left of the machine.
CONTROLS
Parking Brake
The parking brake is...
Owners Manual - Page 21
CONTROLS
Release the key to the RUN position when the engine has started. There are located on the left hand side of the machine. RUN position For using "accessory", turn the key counter clockwise.
8058-046
Fuses
Fuses are two fuses with ratings and functions:
1. 20 A, Primary fuse
2. 7.5 A, Mower deck coupling
Ignition switch - accessory...
Owners Manual - Page 24
... the position of the right lever, this section be in the seat, start moving forward in the reverse position they may cause the mower to move both control levers back until operator becomes comfortable with mower controls and zero turning capability, they return to idle, disengage parking brake, do not engage blades at this time, rotate...
Owners Manual - Page 25
... must be depressed.
2. Set mower deck to the transport position by
locking the lift pedal fully forward. 3. OPERATION
Before Starting
• Read the sections Safety Instructions and Controls before starting the machine.
• Perform the daily maintenance before starting (see maintenance schedule in the Maintenance section).
• Check that there is sufficient...
Owners Manual - Page 26
Move the steering controls outward to the middle position.
Press the control for disengaging the mower deck
8058-043
6. Place controls in neutral position
80661-012
Set the throttle
80658-050
26 Move the throttle to the locked (outer) neutral position. OPERATION
4. Disengage the mower blades by depressing the blade switch.
5.
Owners Manual - Page 29
... (N). The machine's speed and direction are in a straight line forward or backward respectively.
8065-017
8065-016
Engage the mower deck and move the throttle to full throttle (rabbit symbol).
7. When both controls an equal amount forward or backward, the machine moves in the neutral position, the machine stands still. Engage the...
Owners Manual - Page 34
...level (every refueling) Check the safety system Check for fuel and oil leakages Check/clean the engine's cooling air intake Check the mower deck Check for loose hardware (screws, nuts) Clean under the mower... Clean around belts, belt pulleys Check the tire pressures Check battery connections Sharpen3)/ Replace mower blades Clean the engine's cooling air intake 2) Clean the air cleaner's pre-filter ...
Owners Manual - Page 36
... TO FULL CHARGE AT 80OF / 27OC Maximum Rate at the same time. Adding or checking level of charger
IMPORTANT INFORMATION
Do not attempt to "leak" power. 1.
Before connecting battery, remove... or petroleum jelly 6. Always use two wrenches for charging times.
maintenance
Battery
Your mower is not necessary. Coat terminals with terminals in the same
position as the old battery...
Owners Manual - Page 41
... manner. Confirm measurements once again. Blade tips should be level in a side-to -side measurement.
4.
Front lift arm 2. See Technical Data / Transmission. Four slots control the height and pitch of the mower deck. If adjustment is on the discharge side of the mower deck. Turn both side-to-side measurements are inflated to 1/8" higher than...
Owners Manual - Page 47
.... Disengage the brake if activated. 2. When the hydraulic drive operates at normal noise levels and moves smoothly forward and reverse at the proper oil level. With the bypass valve open and the engine
running , slowly move the directional control in both forward and reverse directions (5 to the specifications outlined above. With the bypass...
Owners Manual - Page 61
...Inspect frame 4. Clean underside of deck 13. Inspect spindle bearings 16. Check hydraulic oil level 20. Check seat belt 27. Inspect fuel filter 11. Check the tire pressures 7. ...Check fuel system for leaks 28. SERVICE JOURNAL
Action
100-Hour Service
1. Grease fittings (caster pivots and caster wheels) 2. Inspect throttle cable 5. Change air filter 9. Check blade pitch 14....
Parts Manual - Page 7
...V 11/8 BORE 4.. 539 976688 1 PULLEY, IDLER 5.. 539 107620 1 PULLEY, IDLER 6.. 574 870901 1 BELT 7.. 525 435601 1 PIVOT, IDLER 8.. 510 206301 1 PIVOT, BEARING 9.. 510 041603 1 ARM, IDLER w/ BEARINGS 10.. 574 607001 1 CLUTCH, 200 FT-LB 11.. 510 254401 1 SPRING, ...52.. 539 104763 4 RETAINER, U TYPE 5/16-18 NOT SHOWN
576 413201 1 PIGTAIL, MZ
7 ENGINE PLATE
ITEM PART NO. QTY.
Parts Manual - Page 9
...539 132009 1 LEVER w/ GRIP RT 2.. 539 132010 1 LEVER w/ GRIP LT 3.. 539 130894 2 GRIP, FOAM 4.. 577 251701 2 BRACKET, CONTROL 5.. 539 131518 4 BEARING, FLANGE 6.. 576 140301 2 LEVER, CONTROL 7.. 577 420001 2 LEVER, HANDLE 8.. 577 252401 2 SPACER, PIVOT CONTROL 9.. 539 102720 2 DAMPENER 10.. 577 251801 ���2 BLOCK, TRACKING 11.. 539 102845 1 SPRING 12.. 576...
Similar Questions
When I Try To Start My Ez4824 Zero Turn Mower Nothing Happens
code 32 39 is showing up also
code 32 39 is showing up also
(Posted by earl10101986 2 years ago)
The Mower Will Start The Blades Will Turn But It Wont Drive
(Posted by erickmorris89 8 years ago)
Husqvarna Mz 6128 20 Amp Fuse Keeps Blowing
Every time you would turn the Key the 20 Amp fuse blows. have replaced the switch and have check all...
Every time you would turn the Key the 20 Amp fuse blows. have replaced the switch and have check all...
(Posted by JonathanWilliams2961 9 years ago)
My Husqvarnarz4623 Lawn Mower
My husqvarna lawn mower will not start. It wont even try to turn over or click.
My husqvarna lawn mower will not start. It wont even try to turn over or click.
(Posted by teresaandbryancates 9 years ago)
Mower Won't Start
Was mowing.....got off the mower & won't restart.
Was mowing.....got off the mower & won't restart.
(Posted by bobbirkimer 10 years ago)