Husqvarna 576 XP Support Question
Husqvarna 576 XP Support Question
Find answers below for this question about Husqvarna 576 XP.Need a Husqvarna 576 XP manual? We have 2 online manuals for this item!
Question posted by robert9552 on June 16th, 2013
Engine Won't Start
I have a k 760 saw that won;t start. The saw has a good spark but don't want to start.I have tried everything I know to check but still can't get it to fire. The saw has good compression.
Current Answers
Answer #1: Posted by massists on June 16th, 2013 10:04 PM
massists
Member since:
November 26th, 2011 Points: 129,220
Member since:
November 26th, 2011 Points: 129,220
u can check it out at http://www.husqvarna.com/us/landscape-and-groundcare/products/power-cutters/k-760/ they have a lot of question and answer maybe u try going trough some of those
Related Husqvarna 576 XP Manual Pages
Owners Manual - Page 1
English Operator′s manual
570 576 XP 576 XPG
Please read the operator's manual carefully and make sure you understand the instructions before using the machine.
Owners Manual - Page 2
...any checks or maintenance. Visual check. Decompression valve: The valve is to reduce the pressure in the operator's manual:
Switch off the engine by moving the stop switch to the start position....a visor must be engaged when the chain saw is required.
The chain brake must be dangerous! Please read the operator's manual carefully and make starting the machine.
KEY TO SYMBOLS
Symbols on...
Owners Manual - Page 3
... 19 Fuel safety 19 STARTING AND STOPPING Starting and stopping 21 WORKING TECHNIQUES Before use 23 General working instructions 23 How to avoid kickback 30 MAINTENANCE General 31 Carburettor adjustment 31 Checking, maintaining and servicing chain saw safety equipment 32 Muffler 34 Starter 35 Air filter 36 Spark plug 36 Lubricating the...
Owners Manual - Page 4
... the operator′s manual. In 1956, the first motor driven lawn mowers appeared, followed by chain saws in the front edge according to modify the design and appearance of products ...this area Husqvarna is to develop, manufacture and market motor driven products for forestry and gardening as well as a valuable document. The business concept is working today. By following its...
Owners Manual - Page 5
What is what on the chain saw?
1 Decompression valve 2 Switch for heated handle (576 XPG) 3 Starter handle 4 Adjuster screws carburettor 5 Stop switch (Ignition on/off switch.) 6 Rear handle 7 Choke control/Start throttle lock 8 Fuel tank 9 Starter 10 Chain oil tank 11 Throttle lockout 12 Cylinder cover 13 Front handle 14 Front hand guard 15...
Owners Manual - Page 6
...pieces of serious or fatal injury, we recommend, and follow the filing
instructions.
engine's exhaust fumes, chain oil mist
and dust from thrown objects.
loaded stop switch and ...carefully.
• Check that the cutting equipment is not under the headings Fuel Handling and Starting and Stopping.
• Do not use the saw .
Therefore remove the spark plug cap
when the...
Owners Manual - Page 8
... the brake band (C) around the engine drive system (D) (clutch drum).
• Kickback can either be activated manually (by your left hand hitting the chain if you lose grip of the front handle.
• The chain brake must be engaged when the chain saw is started to prevent the saw chain from you the chain...
Owners Manual - Page 10
... equipment that is
required in people who have impaired
circulation. The body of spark arrestor mesh.
Be aware of overexposure
to minimize vibration and make operation easier. Never use the saw
without a
! If a spark arrestor screen is designed to vibration. engine are sometimes subject to direct exhaust fumes away from the handles by vibration...
Owners Manual - Page 18
... a two-stroke engine and must be run on saws fitted with... Running-in serious engine damage.
• When working with oils class JASO FB or ISO EGB formulated for fuel.
• Always start by filling ... petrol and oil in a clean container intended for air-cooled, two-stroke engines.
• Use good quality unleaded or leaded petrol.
• CAUTION! It is important to accurately...
Owners Manual - Page 19
...your clothes.
Check regularly for a few minutes before starting . Clean the area around the fuel cap. Contamination in damage to the spark plug guard
...good adhesion characteristics. Take care when
handling fuel and chain oil. visible damage to the oil pump components.
• Contact your body that any part of the chain oil tank and fuel tank are
! Always stop the engine...
Owners Manual - Page 21
... hand and pull out the starter cord slowly until the engine starts. Place the machine on the ground by moving the control to reduce the chance of the engine must be engaged when the chain saw on firm ground. Start throttle: The correct choke/start position. As the chain brake is fully extended. Note the...
Owners Manual - Page 22
... band.
• The chain brake should be activated when starting.
This can come loose and cause serious injury. engine's exhaust fumes, chain oil mist
and dust from sawdust can represent a
health risk.
• Never start a chain saw the clutch can damage the machine.
• Never start .
STARTING AND STOPPING
achieved by pushing the front hand guard...
Owners Manual - Page 23
...5 Take great care when cutting a tree that is in place and not
damaged. 10 Check the chain tension. Before using the chain brake. Working in bad weather is never a substitute... and thrown back at the same time).
Contact your chain saw switch off the engine and lock the chain using a chain saw user.
See instructions under the heading "Personal protective equipment". Basic...
Owners Manual - Page 31
... if the idle speed setting cannot be turned anti-clockwise until good acceleration and idling are made the air filter should be...Adjusting the carburettor means that the engine is turned clockwise this could cause damage.
• Now start the machine according to rotate. ...
Fine tuning may be required if the chain saw until the chain starts to get the best performance from you and so...
Owners Manual - Page 32
...When the speed governor is securely anchored to the engine.
CAUTION! CAUTION! Correctly adjusted carburettor
When the... back to make sure it may cause starting difficulties and poor acceleration. If...spark is adjusted (screwed in). Checking, maintaining and servicing chain saw 4-cycles. Dirt and wear can impair operation of the machine's safety equipment. Checking...
Owners Manual - Page 33
... rear handle towards the stump. English - 33
See the instructions under the heading Start and stop immediately.
Checking the brake trigger
Place the chain saw , with the engine switched off, on firm ground and start it . The chain should stop .
• Check that the throttle control and throttle lockout move freely and that the chain...
Owners Manual - Page 34
...Check that is best done with a special spark arrestor mesh. A blocked mesh will overheat and this type of the chain saw.... The exhaust gases are equipped with a wire brush.
Muffler
Right hand guard
Never use a muffler if the spark arrestor mesh is damaged.
If the mesh is not damaged and that has a faulty muffler. Start the engine and make sure the engine...
Owners Manual - Page 36
... the air filter after about a month in operating problems and starting difficulties. A damaged air filter must be regularly cleaned to engine parts. • Excessive fuel consumption. A HUSQVARNA chain saw can be cleaned more thoroughly by washing it .
The spark plug should be replaced after taking any further action.
Use the...
Owners Manual - Page 41
...TECHNICAL DATA
Technical data
570
Engine
Cylinder displacement, cm3
68
Cylinder bore, mm
49
Stroke, mm
36
Idle speed, rpm
2700
Power, kW/ rpm
3,6/9600
Ignition system
Spark plug
NGK BPMR 7A/ ...drive links, inch/mm
0,058/1,5
Type of drive sprocket/number of 1 dB (A). power, m/sec
21,4
576 XP
73,5 51 36 2700 4,2/9600
NGK BPMR 7A/ Champion RCJ 7Y 0,5
0,7 5-22 0,40 Automatic
6,6
...
Owners Manual - Page 43
... to the noise emissions in the environment" 2000/14/EC. of May 8, 2000 "relating to the example that the chain saws for forest service Husqvarna 570, 576 XP and 576 XPG from 2009's serial numbers and onwards (the year is clearly stated in plain text on the type plate with subsequent serial number), are...
Similar Questions
Husqvarna 576 Cutting About 5 Rings Then Loosing Power
cuts about 5 decent rings of jarrah then loses power,let it cool down then does the same thing,just ...
cuts about 5 decent rings of jarrah then loses power,let it cool down then does the same thing,just ...
(Posted by murphylaw 1 year ago)
Hose Has Good Pressure To Inlet, Nothing Come Out When Motor Running. No Clogs.
new husqvarna 3100, used for 6 months. hook up water hose and have good pressure.don't see any clogs...
new husqvarna 3100, used for 6 months. hook up water hose and have good pressure.don't see any clogs...
(Posted by w684mkt10 2 years ago)
Husqvarna 440e Won't Start
I cannot get a rarely used 440e to start. The spark plug is soaking wet. I replaced the plug with an...
I cannot get a rarely used 440e to start. The spark plug is soaking wet. I replaced the plug with an...
(Posted by ray361619393 3 years ago)
566xp Crank Locked Up
hi I have a 576xp great running saw but after about 2 months the saw crank locked up also i have 10 ...
hi I have a 576xp great running saw but after about 2 months the saw crank locked up also i have 10 ...
(Posted by bigbeartreecr 6 years ago)
I Don't Have Any Spark Coming From Spark Plug
no spark from new spark plu
no spark from new spark plu
(Posted by twinmountainbuckingbulls 6 years ago)