Husqvarna 224L Support Question
Husqvarna 224L Support Question
Find answers below for this question about Husqvarna 224L.Need a Husqvarna 224L manual? We have 2 online manuals for this item!
Question posted by shadoenthemoonlight68 on March 4th, 2019
Timing Belt Replacement How Do U Set Timing
Need to know how to set timing belt on 224L Husqvarna weed trimmer that has a Honda gx25 engine in it
Current Answers
Answer #1: Posted by hzplj9 on March 5th, 2019 3:52 AM
hzplj9
Member since:
June 25th, 2012 Points: 4,874,710
Member since:
June 25th, 2012 Points: 4,874,710
This is the service manual for the engine. Not a good copy but there is the information you require. Timing is 30 deg BTDC. Page 36 explains the procedure. Providing the flywheel is placed correctly the timing is set.
https://www.manualslib.com/manual/539284/Honda-Gx25.html
Good luck. Hope that helps.
Related Husqvarna 224L Manual Pages
Owners Manual - Page 1
Lire attentivement et bien assimiler le manuel d'utilisation avant d'utiliser la machine. Operator's manual (EPA)
224L
Please read the operator's manual carefully and make sure you understand the instructions before using the machine. Lea detenidamente el manual de instrucciones y asegúrese de entender su contenido antes de utilizar la máquina.
Owners Manual - Page 2
..., while working, that you understand the instructions before carrying out any checks or maintenance. trimmer heads with a fixed object. Always wear approved protective gloves. The operator of ... or fatal injury to the side when the blade comes into contact with trimmer cord.
Switch off the engine by moving the stop switch to special certification requirements for certain...
Owners Manual - Page 3
... the
manufacturer. the design of the machine be performed by the use of nonauthorized accessories or replacement parts.
Under no circumstances may not cover damage or liability caused by any nonroad engine repair establishment or individual. or trimmer can be dangerous if used
incorrectly or carelessly, and can cause
serious or fatal injury...
Owners Manual - Page 4
... and market high quality motor driven products for forestry and gardening as well as for the address of muskets. Thank you will be...time.
Think of continuous product development and therefore reserves the right to modern kitchen appliances, sewing machines, bicycles, motorcycles etc. Husqvarna AB has a policy of this may be extended.
In 1956, the first motor driven lawn...
Owners Manual - Page 5
WHAT IS WHAT?
What is what?
1 Trimmer head 2 Bevel gear 3 Grease filler cap, bevel gear 4 Cutting attachment guard 5 Shaft 6 Loop handle 7 Stop switch 8 Throttle control 9 Throttle lockout 10 Cylinder cover
11 ...
Owners Manual - Page 6
...attachments.
All covers, guards and handles must comply with
pacemakers. Running an engine in EU countries.
See instructions under the heading Personal protective equipment.
Personal ...service instructions described in choosing the right equipment.
A clearing saw, brushcutter or trimmer can
result in any way from its original specification. Ask your...
Owners Manual - Page 7
...be checked and
maintained as described in the idle position then the carburettor idle setting must contact your service agent.
If your machine.
The machine's
safety equipment must...equipment
This section describes the machine′s safety equipment, its original position when you need further information please contact your nearest service agent. Never use a machine with the ...
Owners Manual - Page 8
Stop switch
Use the stop setting. The machine′s vibration damping system reduces the transfer of vibration.
See the chapter....
Check that the vibration damping element is undamaged and not cracked. Replace the guard if it has been exposed to impact or is intended to switch off the engine.
attachment without an approved guard.
These
symptoms normally appear in people ...
Owners Manual - Page 9
...ers with catalytic
! The inside the locking nut must be replaced after stopping. Avoid contact with a spark arrestor screen this... socket spanner with this . A blocked screen will cause the engine to the direction of rotation of the cutting attachment.
GENERAL SAFETY ...tted with a shaft that is securely attached to secure some time after it has been put on your machine. You should...
Owners Manual - Page 13
... so that has come in contact with a four-stroke engine.
Gasoline
Always use HUSQVARNA engin oil.
• When HUSQVARNA engine oil is always sufficient oil in contact with sparks or... cause
serious injury when inhaled or allowed to the engine. If you run the engine on the dipstick.
Engine oil for some time the fuel tank should be emptied. Contact your clothes...
Owners Manual - Page 15
... cannot come loose and cause personal
injury. Cold engine
Ignition: Set the stop switch to being tightened too much. Choke: Set the choke control in the working area, otherwise there... need not be correctly fitted and undamaged before starting
Starting and stopping
• Check that the trimmer head and trimmer guard are not damaged or cracked. Replace the trimmer head or trimmer...
Owners Manual - Page 16
The bulb need not be completely filled. English
1151387-49 Rev.2 2009-06-10 When the engine is fully extended. CAUTION! Primer bulb: Press...CAUTION!
STARTING AND STOPPING
Warm engine
Ignition: Set the stop button.
This can damage the machine.
16 - Stopping
Stop the engine by switching off the ignition with your right hand until the engine starts.
with your foot!)....
Owners Manual - Page 18
...borders, however it . Grass trimming with a trimmer head
Trimming • Hold the trimmer head just above the ground and tilt it can easily remove grass and weeds up .
Hold the cord parallel to and ...Long periods at an
angle. WARNING!
Keep the trimmer head just above the ground at full throttle without any load on the engine can ruin the lawn and damage the tool. Let the cord work ....
Owners Manual - Page 19
... is a clear margin to the speed at idle speed. The exhaust gases are mixed in the carburetor.
• Setting the carburettor involves adapting the engine to rotate. Do not use and
remain so for some time after stopping. WARNING!
For optimum adjustment of fire!
1151387-49 Rev.2 2009-06-10
English - 19...
Owners Manual - Page 20
... recommended spark plug type! Always use for a long time cannot be soaked in dusty conditions the air filter should be replaced.
Wash it and check that the spark plug is...be cleaned completely. The air filter must always be replaced after about a month in demanding conditions. The cooling system consists of engine power • Unnecessary wear to the piston and cylinder....
Owners Manual - Page 21
...HUSQVARNA replacement parts. Put the filter in a plastic bag and pour the filter oil over it spread evenly through the filter quite quickly and collect in the bevel gear does not normally need...not specifically recommended by HUSQVARNA.
1151387-49 Rev.2 2009-06-10
English - 21 Oiling the air filter
MAINTENANCE
Always use common engine oil.
no. 531 00 92...
Owners Manual - Page 22
... function correctly from the engine, tank or fuel lines. X
Check that the cutting attachment does not rotate at idle. X
Check that the stop switch works correctly.
X
Clean the air filter.
Check that the vibration damping elements are tight. Check that nuts and screws are not damaged.
Replace the trimmer head if necessary...
Owners Manual - Page 23
engine output, acc. speed, .... NOTE!
The table indicates the highest and lowest values.
224L Approved accessories Arbor shaft thread M10 Plastic blades
Trimmer head
Type
Tricut Ø 255 mm Tricut Ø 300...Vibration levels at the user's ear and vibration on the handles are measured with the following time distribution: 1/2 idle and 1/2 max. speed, left/right handles, min.: At max. ...
Owners Manual - Page 24
... -road engine at no cost to the effect of warranty coverage. Any such part repaired or replaced under warranty is warranted for the part. Your emissions control system may be repaired or replaced by Husqvarna Forest & Garden at all applicable regulations adopted by Husqvarna Forest & Garden at no cost. Warranty services or repairs will be hoses, belts, connectors...
Owners Manual - Page 25
..., you should contact your nearest authorized servicing dealer or call Husqvarna Forest & Garden at 1-800-487-5951 or visit www.usa.husqvarna.com. WHERE TO GET WARRANTY SERVICE
Warranty services or repairs are not covered. MAINTENANCE, REPLACEMENT AND REPAIR OF EMISSION-RELATED PARTS
Any replacement part may not be provided without charge to the owner...
Similar Questions
Husqvarna 224l Carb 531008681 Hi/lol Screws Factory Settings ?
I am looking for the factory settings for the high and low adjustment screws for my Husqvarna 224L w...
I am looking for the factory settings for the high and low adjustment screws for my Husqvarna 224L w...
(Posted by bestluckfishingownerjameswilson2 1 year ago)
I Have Ahusqvarna 323l 2005. I Need To Replace The Spring In The Throttle Handle
i need replaceing the spring in the throttle handle. i need a repair manual that shows how to in a 2...
i need replaceing the spring in the throttle handle. i need a repair manual that shows how to in a 2...
(Posted by cgwinn2223 3 years ago)
How To Replace The Shaft On A 224l Husqvarna Weed Eater
(Posted by karrfamilywv 3 years ago)
Adjust Timing On 224l Husqvarna
how do I adjust timing on my weedeater? It's a husqvarna 224L
how do I adjust timing on my weedeater? It's a husqvarna 224L
(Posted by bucky7161 4 years ago)
Mower Will Not Go Into Gear
how do u replace a motion drive belt on a yth2042
how do u replace a motion drive belt on a yth2042
(Posted by lindakbrown 9 years ago)