Hoover UH70935 Support Question
Hoover UH70935 Support Question
Find answers below for this question about Hoover UH70935.Need a Hoover UH70935 manual? We have 1 online manual for this item!
Question posted by tesslea on August 8th, 2014
Agitator Not Spinning
Removed the plate to clean the agitator which spins perfectly while the plate is removed but once the plate is screwed back into place agitator will NOT spin. What is the problem?
Current Answers
Related Hoover UH70935 Manual Pages
Product Manual - Page 3
... Dirt Cup ...5 Position Tools ...5 How To Use ...6 Vacuum Description 6 On-Off Switch ...6 Suction Only Mode/ Brushroll Shut-Off 6 Cord Release...6 Transporting Cleaner 7 Handle Positions...7 Carpet Height Adjustment 7 Tools ...8 Select Proper Tool 8 Removing Hose ...8 Attach Wand And Tools 8 How To Clean Tools 8 Stair Cleaning ...9 Cord Rewind and Storage 9 Maintenance ...10 Dirt Cup...
Product Manual - Page 6
...Do not run appliance over cord. Not intended for use without Dirt Cup and/or Filters in place. • WARNING: This product contains chemicals known to pick up flammable or combustible liquids, ...
3 WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:
• Fully assemble before cleaning or servicing. • Do not use with wet hands. • Do not put any opening blocked;...
Product Manual - Page 7
... does not fit fully in any way.
4 If it still does not fit, contact a qualified electrican to clean out hose as they may cause damage.
• Store appropriately indoors in one location for an extended
period of...8226; With brushroll on, do not allow cleaner to sit in a dry place. Do not expose machine to freezing temperatures.
• Do not use sharp objects to install the proper outlet....
Product Manual - Page 10
... be ordered at Hoover.com or call 1-800-944-9200. Handle
B
C
E F
B. Push down firmly.
1.3 Using a Phillips screwdriver, fasten (1) screw behind handle into vacuum base. ATTACH HANDLE
Note: Remove the screw located in the vacuum base and set aside until secure.
1.6 Place Crevice Tool into Wand and slide into tool storage area on left back side (B) of...
Product Manual - Page 11
.... Handle Release Pedal
**Varies per model
ON-OFF SWITCH
2.2
A
SUCTION ONLY MODE/ BRUSHROLL SHUT-OFF
for cleaning of the plug and pull to be used for Suction Only
Mode, step on pedal (B).
2.2 Plug cord ...deeper than 1".
! Do not pull the cord past the red tape. ON/OFF Switch
3. To turn vacuum ON, push ON/OFF button (A) once. CORD RELEASE
2.4
2.4 Grasp the end of high pile carpet ...
Product Manual - Page 14
...
If the vacuum is desired, while maintaining good cleaning performance. TRANSPORTING CLEANER
2.5 To move your cleaner has two positions: 1) Upright for storage and when using cleaning tools. 2)...higher setting.
7 Actual model may vary from room to desired height setting. For maximum cleaning performance, the following carpet height settings are recommended:
• Lowest setting (1): for bare...
Product Manual - Page 15
... extend wand, twist
counter-clockwise to your hose.
3. Crevice Tool may vary per model)
! The agitator brushroll will not rotate when the cleaner is in the upright position. Unplug vacuum before using cleaning tools, place cleaner handle in water.
REMOVING HOSE
! Telescoping Wand is ready for upholstered furniture, draperies, mattresses, clothing, and carpeted stairs. (Tool...
Product Manual - Page 18
... in upright position.
3.4
3.5
! CAUTION ! Do not place cleaner on stairs. Hold plug when rewinding onto cord reel. Do not
allow plug to back. When using tools, always ensure handle is in upright position.
Never leave the vacuum standing on stairs. WARNING ! A
! Use extra care when cleaning on stairs or furniture,
as it may...
Product Manual - Page 19
...cleaning may seal the filter and cause a reduction in place. DIRT CUP
When to activate after following the above steps, your cleaner needs servicing. WARNING ! Unplug before removing the dirt cup.
! When using the vacuum...performance, empty the dirt cup before the dirt cup reaches the max line (A). PROBLEM
POSSIBLE CAUSE
POSSIBLE SOLUTION
If System Check 1. Dirt cup is not working as ...
Product Manual - Page 22
... replacement within the warranty period.
Squeeze filter twice while underwater.
Unplug
before cleaning or servicing. Rinsable Filter: How to Clean
Remove dirt cup as described in slots, pull filter frame (A) straight out. Do not use
vacuum without dirt cup or filters in place.
How to Empty
4.3 4.3 Press dirt cup
release button (A) and
A
pivot cup out...
Product Manual - Page 23
... facing up
and remove the (6) screws (A).
4.12 Pivot out bottom plate away from hidden latch
B
(B) and remove any debris and/or hair from moving parts Unplug before cleaning or servicing.
Remove assembly from dirt cup (A).
4.10 Dirt and debris can be cleaned from images shown. 12 CAUTION !
Unplug before servicing.
4.11 A
4.12
4.11 Turn vacuum over so bottom...
Product Manual - Page 26
... away debris or obstructions from moving parts Unplug before cleaning or servicing.
4.18
Removing Lens
Press Handle Release Pedal and place handle in place.
Do not twist or turn bulb when installing bulb.
Installing Bulb
4.19 Pull old bulb straight out of tool.
4.16 Remove bottom plate (B).
4.17 Remove any debris and/ or hair from brushroll. Rotate...
Product Manual - Page 27
... ensure that the brushroll end caps are equipped with your vacuum. CAUTION ! To check the belt, refer to motor or...plate, aligning latch (B) and fastening all (6) screws (A). LUBRICATION
The motor and brushroll are in place, pull and slide brushroll into nozzle making sure that it is facing up and remove the (6) screws (A). 4.22 Pivot out bottom plate away from hidden latch (B). 4.23 Remove...
Product Manual - Page 30
... Set Carpet Height Adjustment knob to appropriate setting for carpet being applied to cool for carpet being cleaned - Check items under "Vacuum won 't pick up or Low suction." Clear/ remove debris from vacuum
1. PROBLEM POSSIBLE CAUSE
POSSIBLE SOLUTION
Vacuum won 't turn
1. Thermal Protector activated.
3. Broken or worn belt. 4. Carpet height setting is ON.
6. Suction Only Mode...
Product Manual - Page 31
... outlet nearest you need further assistance: To speak with a customer service representative call 1-800-944-9200. If you . • For an automated referral of the vacuum.) PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE.
16 SERVICE
To obtain approved Hoover® service and genuine Hoover® parts, locate the nearest...
Similar Questions
How Can You Dismantle And Replace Battery For Model #53020
(Posted by tdkipswich 5 months ago)
The Roller Brush Does Not Turn. The Small Flat Belt Is Intact.
(Posted by Markanderlik 7 months ago)
Hoover Fh51010 Pro Clean Pet Belt Change
I know that pivot goes over the belt. But what about the white roller part? Does belt just sit on to...
I know that pivot goes over the belt. But what about the white roller part? Does belt just sit on to...
(Posted by Moonshineimp 2 years ago)
Spinscrub Leaks Even When It's Off
my spinscrub leaks clean water as soon as I put the cleaner fluid tank on.doent have have power on t...
my spinscrub leaks clean water as soon as I put the cleaner fluid tank on.doent have have power on t...
(Posted by gtogregg 8 years ago)
Hoover S3670 Service Manual
I am trying to get into the vacuum,have removed four screws,but suspect there are some one way click...
I am trying to get into the vacuum,have removed four screws,but suspect there are some one way click...
(Posted by whumer22 13 years ago)