Honeywell RTH7000 Support Question
Honeywell RTH7000 Support Question
Find answers below for this question about Honeywell RTH7000.Need a Honeywell RTH7000 manual? We have 1 online manual for this item!
Question posted by rob82268 on August 3rd, 2011
Thermostat Problem
I set the thermostat to 74....systems cools down room & thermostat reads 74, but cooling (system will not shut of) it just keeps running cold air? Is the thermostat screwed up?
Current Answers
Related Honeywell RTH7000 Manual Pages
Owner's Manual - Page 1
Operating Manual
RTH7400/RTH7500 Series
Programmable Thermostat
69-2222EF-03
Owner's Manual - Page 2
...compressor damage, do not operate cooling system when outdoor temperature is below ...or call Honeywell Customer Care toll-free at 1-800-468-1502
Read and save these instructions.
® U.S. Registered Trademark. Perchlorate ...covers the RTH7400 and RTH7500 models.
(Pull thermostat from wallplate and turn over to find model number) This thermostat contains a Lithium battery which may apply, ...
Owner's Manual - Page 3
See page 3 to go . Table of contents
About your new thermostat Thermostat features 2 Programming at a glance 3 Quick reference to controls 4 Quick reference to status display 5
Programming & Operation Clock setting 6 Fan setting 7 System setting 8 Using program schedules 9 Program schedule overrides 13 Auto Changeover 15 Filter reminder 17 Special features 18
RTH7400/RTH7500 Series...
Owner's Manual - Page 4
...8226; Precise comfort control keeps temperature within 1°F of the level you set. • Change/...check reminder lets you many years of reliable service and climate control. It has been designed to give you know when to replace furnace filter. • Large display with backlight is easy to -use thermostat. You've just purchased the world's most advanced, easy-to read...
Owner's Manual - Page 5
...settings below and change , see page 8
4..
Set clock See page 6
2.. Select system setting: Preset to Auto To change , see pages 10-14
ONE-TOUCH TEMP CONTROL: You can override the program schedule at 6 pm and go to do is set the time and day. Select fan setting... RTH7400/RTH7500 Series
Your new thermostat is pre-programmed and ready to go! This thermostat is ready to go. All...
Owner's Manual - Page 6
Schedule Press to set program schedule (see pages 11-12).
69-2222EF-03
4
M28426
Clock & More Press to set clock (see pages 11-14), or to make selections from screen menus. Operating Manual
Quick reference to controls
Arrow buttons Press to adjust temperature (see page 6) or furnace filter reminder. System & Fan Press to select fan operation (see page 7) or system (see page 8).
Owner's Manual - Page 7
...
Smart Response® Technology in effect (see page 15)
System setting (see page 8)
Mon
75 Recovery System Cool
6:01 AM
Fan Auto
Set to
75
Heat On
System & Fan
Schedule
Clock & Mode
Temperature setting
Fan setting (see page 7)
M28078
Other display messages: • Cool On: Cooling system is activated • Heat On: Heating system is activated • Aux Heat On: Auxiliary heating...
Owner's Manual - Page 8
... updates for daylight savings time, and stores all date/time information.
Note: To change the current week day display, see System Setup in your Installation Guide.
6 Operating Manual
Clock setting
Press CLOCK
System & Fan
Schedule
Clock & More
Adjust time, then press DONE
Mon
M28079
6:01 AM
Go Back
69-2222EF-03
Done M28080...
Owner's Manual - Page 9
System Heat
System
Fan Auto Fan
Done
M28082
7
69-2222EF-03
Fan setting
Press SYSTEM & FAN
System & Fan
Schedule
Clock & More
M28081
Press FAN to select mode, then press DONE
RTH7400/RTH7500 Series
Press SYSTEM & FAN, then FAN to select fan operation:
• On: Fan is always on. • Auto: Fan runs only when the heating or
cooling system is on.
Owner's Manual - Page 10
...Operating Manual
System setting
Press SYSTEM & FAN
System & Fan
Schedule
Clock & More
Press SYSTEM to select mode, then press DONE
M28081
System Heat
System
Fan Auto Fan
69-2222EF-03
Done M28083
Follow steps at left to select system: • Heat: Thermostat controls only the heating system. • Cool: Thermostat controls only the cooling system. • Auto: Thermostat automatically...
Owner's Manual - Page 11
... during the morning, until bedtime.
WAKE
6:00 am
62 °
Set to the time you return home and the temperature you are away (usually an energy...Set to bed and the temperature you leave for the day. You can program four time periods each day, with different settings for maximum energy savings.
RTH7400/RTH7500 Series
Save money by setting program schedules
It's easy to program your system...
Owner's Manual - Page 12
Operating Manual
Energy saving settings for maximum cost savings
This thermostat is pre-set with energy saving program settings. We recommend these settings, since they can reduce your heating/cooling expenses by as much as 33%. (See next page to adjust times and temperatures of each time period.)
Wake (6:00 am)
Leave (8:00 am)
Return (6:...
Owner's Manual - Page 13
... STEP, then s or t to set Cool temperature for selected days.
4. Press NEXT STEP twice, then press s or t to highlight Mon-Fri (they will share the same settings).
3. Press DONE to
62 Heat
...Next Step
Done
1.
RTH7400/RTH7500 Series
To adjust program schedules (RTH7400 only)
Press SCHEDULE
System & Fan
Schedule
Clock &...
Owner's Manual - Page 17
... the system button to select between the cool and heat settings. When the system mode is raising the cool setting up to view/adjust either "Heat" or "Cool" for which temperature setting you are used on the indoor temperature.
While in the Auto mode, if a schedule override takes place (temporarily or permanently) the thermostat will also show the thermostat is...
Owner's Manual - Page 18
...Auto Heat
Temporary Set To
74 Heat Cool
System
Hold
Cancel
M27486
The triangle indicates the cool temperature is lowering the heat setting down to maintain 3 degrees between heat and cool settings. Operating Manual
AubtooutCyhoaunrgneeowvetrhermostat
If the cool temperature is lowered to where it gets close to the heat setting, an arrow next to heat will show the thermostat is increasing...
Owner's Manual - Page 19
... to replace your filter.
Press MORE, then NEXT. 2. Press RESET. 3. AFibltoeurtryeomuirndnewr thermostat
RTH7400/RTH7500 Series
Press RESET after changing the filter, to restart the timer. Press RESET after changing filter
Change Filter
70
Set to
6:01 AM 70 Heat On
System
Fan Auto Heat
Reset
Schedule
Clock & More
M28089
Press MORE to save...
Owner's Manual - Page 20
... heat will automatically adjust settings to maintain this 3-degree separation. When the system is set . Heat and cool settings must be at 6. Auto Changeover: This feature is used in climates where both air conditioning and heating are used on screen.
Operating Manual
Special features
Smart Response® Technology: This feature allows the thermostat to "learn" how long...
Owner's Manual - Page 21
... if the warning does not appear, you should replace batteries once a year, or before batteries are optional (to provide backup power) if your thermostat was wired to run on AC power when installed. The warning flashes about 30 days before leaving home for more than a month. Install fresh batteries immediately when the...
Owner's Manual - Page 23
... at heating & cooling system is on. • Make sure furnace door is closed securely. • If thermostat is battery powered, make sure fresh AA alkaline
batteries are set to acceptable ranges:...thermostat, please try the following suggestions. Most problems can be corrected quickly and easily. temperature will • Cool: 50° to 99°F (10° to Make sure heating and cooling...
Owner's Manual - Page 29
Mode d'emploi
Série RTH7400/RTH7500
Thermostat programmable
69-2222EF-03
Similar Questions
Cant Get The Thermostat To Blow Hot Air Out It Just Blows Cold Air
(Posted by rankinade18 11 years ago)
Problems With The Rth7000 Working Our New 2 Stage Furnace. Doesn't Maintain Heat
(Posted by rick78358 11 years ago)
How Do You Change The Day On This Thermostat. I Have Tried Everything.
(Posted by legalflyer 11 years ago)
How To Change Only The Day On A Honeywell Rth 7000 Thermostat
Today I noticed that my thermostat is set on Sunday, but today is Monday. I cannot figure out how to...
Today I noticed that my thermostat is set on Sunday, but today is Monday. I cannot figure out how to...
(Posted by allnlaw 11 years ago)