GE GTD33EASKWW Support Question
GE GTD33EASKWW Support Question
Find answers below for this question about GE GTD33EASKWW.Need a GE GTD33EASKWW manual? We have 3 online manuals for this item!
Question posted by Captmikee on November 5th, 2020
I Replaced The Belt But While Putting The Unit Together, 3 Wires Became Inclined
Need to know which wires go where on the timer thank yo
Current Answers
Answer #1: Posted by Odin on November 5th, 2020 7:07 PM
Odin
Member since:
April 10th, 2010 Points: 41,236,660
Member since:
April 10th, 2010 Points: 41,236,660
Hope this is useful. Please don't forget to click the Accept This Answer button if you do accept it. My aim is to provide reliable helpful answers, not just a lot of them. See https://www.helpowl.com/profile/Odin.
Related GE GTD33EASKWW Manual Pages
Use and Care Manual - Page 1
...2-3
Operating Instructions . . . 4-5
Control Panel 4 Dryer Features 6 Loading and Using the Dryer. . . . . . 6 Venting the Dryer 8
Care and Cleaning 7
Troubleshooting Tips . . . . 9-10
Consumer Support
Consumer Support 12 Warranty 11
Owner's Manual
Write the model and serial number here:
Model
Serial
You can find them on a label on the front of the dryer behind the door.
234D2431P003...
Use and Care Manual - Page 2
... the fabric
softener or product.
„ DO NOT use any type of spray cleaner when cleaning dryer
interior. These words are defined as:
DANGER Indicates a hazardous situation which , if not avoided, ... death or serious injury.
Keep dryer area clear and free from the accumulation of aerosol into, on or in or spotted with controls, repair or replace any part of children is necessary...
Use and Care Manual - Page 3
...by the incomplete combustion of fire or explosion or to the outdoors. GEAppliances.com
ADDITIONAL GAS DRYER WARNINGS
WARNING
For your safety, the information in this or any other appliance. -
Installation and...the room, building, or area of this manual must be performed by properly venting the dryer to prevent damage, personal injury, or death.
-
DO NOT store or use any ...
Use and Care Manual - Page 4
... any type of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before
operating this manual, features and appearance may vary from dryer. Throughout this appliance. To reduce the risk of oil on a clothesline or by using an air dry cycle. Do not dry anything flammable on it...
Use and Care Manual - Page 5
...delicates and items labeled permanent press. To restart the dryer, close the door and select Start to heavy cottons. NOTE: Drying times will stop the dryer. Quick Fluff For freshening or fluffing up already ...wrinkle-free, permanent press and delicate items, and knits. Select More Dry if you use the dryer.
Medium Air Fluff For fluffing items without heat. Use the Time Dry cycle. No Heat
C ...
Use and Care Manual - Page 6
... the rack extends into the dryer drum.
Drum Lamp (on some models)
Before replacing the light bulb, be used... with the same size bulb. They may be sure to dry
Drip dry
Dry flat
In the shade
Bleach
symbols Any bleach
(when needed)
Only non-chlorine bleach (when needed)
Do not bleach
About the dryer features.
Bounce® Fabric Conditioner Dryer...
Use and Care Manual - Page 7
... the lint filter from the outside that there is not covered by some laundry pretreatment soil and stain remover products.
The Exhaust Duct: Inspect and clean the exhaust ducting at ...washing compounds with a clean cloth. Run your warranty. Do not operate the dryer without the lint filter in place.
Dry thoroughly and replace. The Lint Filter: Clean the lint filter before each use a damp ...
Use and Care Manual - Page 9
... need to an even floor space, or adjust leveling legs
Dryer may tumble if only one breaker tripped.
• Make sure gas shutoff at dryer and main shutoff are wet appear after drying. Your dryer...
What To Do
• Make sure the dryer plug is tripped; Some shaking/noise is off
• Check the house fuse/circuit breaker box and replace both fuses or reset both breakers. Overloading
&#...
Use and Care Manual - Page 10
...items from lightweight items (generally, a well-sorted washer load is correct.
• Replace fuses or reset circuit breakers. Separate large, heavy fabrics into smaller ones.
Select ...
• Match control settings to the load you are concerned about shrinkage in dryer after drying.
• If you are drying.
• Clean lint filter before...not put more moisture and take longer to dry.
Use and Care Manual - Page 11
...to use the product.
„ Improper installation, delivery or maintenance.
„ Failure of the dryer which are not defective or broken, or which fails due to the product caused by accident, fire...179; For The Period Of: GE Will Replace:
One Year From the date of the original purchase
Any part of the product if it is needed to replace the defective part. During this appliance.
„...
Installation Instructions - Page 1
...dryer with the customer.)
Printed in "Connecting the Dryer to water or weather.
• To reduce the risk of the dryer control system.
• Remove and discard existing plastic or metal foil duct and replace... service or discarded, remove the dryer door.
• Service information and the wiring diagram are known to the outdoors.
• Before the old dryer is the safety alert symbol. ...
Installation Instructions - Page 2
...need to be minimized by the incomplete combustion of natural gas or LP fuels. UNPACKING YOUR DRYER
Tilt the dryer sideways and remove the foam shipping pads by phone at the sides and breaking them away from the dryer...:
GE strongly recommends the use of new water supply hoses.
Gas appliances can be replaced every 5 years to reduce the risk of hose failures and water damage. Exposure to...
Installation Instructions - Page 8
...'s responsibility to test for gas leaks.
If local codes permit an external ground wire (not provided) may be added by attaching to the green ground screw on the ...be electrically grounded in accordance with soapy solution or equivalent. Installation Instructions CONNECTING A GAS DRYER (skip for electric dryers) (cont.)
TEST FOR LEAKS
Never use an open flame to have a licensed electrician...
Installation Instructions - Page 10
... connector. If it will reduce the risk of electrical shock.
Use a UL-listed strain relief. Replace the terminal block cover. Check with upturned ends.
Connect remaining two supply wires to center terminal. Replace the terminal block cover. This dryer uses a cord having an equipment-grounding conductor and a grounding plug. SAVE THESE INSTRUCTIONS
ELECTRICAL CONNECTION...
Installation Instructions - Page 11
... the center of the terminal block (marked L1 and L2). NEVER LEAVE THE COVER OFF OF THE TERMINAL BLOCK. Remove and discard ground strap. CONNECTING DRYER USING 3-WIRE CONNECTION
If required, by local code, install external ground (not provided) to power cord entry hole. NOT for use on new construction. Tighten all...
Installation Instructions - Page 12
... transition duct.
• In Canada and the United States, only transition ducts that
comply with the ...duct to the home exhaust duct. TOOLS AND MATERIALS YOU WILL
NEED TO INSTALL EXHAUST DUCT
ˆ Phillips-head screwdriver
ˆ...rigid metal transition duct is highly recommended (see illustrations at both the dryer and the wall is recommended.
• Rigid metal transition ducts reduce...
Installation Instructions - Page 14
... connection. BEFORE YOU BEGIN
• Remove and discard existing plastic or metal foil duct and replace with the opening .
and moisture-tight by at turns and joints. STANDARD REAR EXHAUST
We ... at least 12" above ground level or any fasteners that you install your dryer before installing your washer.
RECOMMENDED CONFIGURATION TO MINIMIZE EXHAUST BLOCKAGE
Using duct elbows will...
Installation Instructions - Page 15
...Gas and Electric models. Be sure not to pull or damage the electrical wires inside the dryer exhaust duct and save
Left Bottom
Remove desired knockout (one only)
Detach ...models only), left side exhaust
Left
Reconnect the cut portion (A) of cabinet for Electric models only. Disconnect dryer from electrical supply. Failure to do so may result in place through the side opening , locate the ...
Installation Instructions - Page 16
... RIGHT SIDE OF CABINET (cont.)
• Apply duct tape as shown on the joint between the dryer internal duct and the elbow, and also the joint between the elbow and
the side duct. Then,... adjust the two anti-tip legs at the corners to avoid unit tip over. otherwise, they may separate and cause a safety hazard.
Duct tape
Internal duct joints must be...
Quick Specs - Page 3
... capability - Make it simple to set cycles Up-front lint filter - Capacity Aluminized Alloy Drum Electric Dryer
FEATURES AND BENEFITS Aluminized alloy drum - Offer a choice of drying temperatures for personalized fabric care. GTD33EASK
GE Appliances 7.2 Cu. Up to meet laundry room needs Model GTD33EASKWW - White
GTX33EASKWW_GTX33GASKWW_GTX33GASKWW_GTD33GASKWW
Specification Revised 5/16
Similar Questions
Where Do The Two Brown Wires Go That Come Up From The Left Side Of The Dryer Whe
You are looking straight at the back of the dryer
You are looking straight at the back of the dryer
(Posted by tonattebakerhundley 8 months ago)
How To Replace Belt
Dryer turns on and heats up but the tub does not rotate. Need to know how to open this model and che...
Dryer turns on and heats up but the tub does not rotate. Need to know how to open this model and che...
(Posted by Anonymous-102715 11 years ago)