Frigidaire Cpcs3085lf: Clock

The set clock pad is used to set the clock. The clock may be set for 12 or 24 hour time of day operation. The clock has been preset at the factory for the 12 hour operation.

When the range is first plugged in, or when the power supply to the range has been interrupted, the timer in the display will flash. to set the clock (example below for 1:30)

1. Press set clock. "clo" will appear in the display.

2. Press 1 3 0 pads to set the time of day to 1:30. "clo" will stay in the display.

3. Press start. "clo" will disappear and the clock will start.

CHANGING BETWEEN 12 OR 24 HOUR TIME

1. Press and hold set clock for 6 seconds. "clo" will

2. continue holding the pad until "12Hr daY" or "24Hr

3. Press selF clean to switch between the 12 and 24

4. Press start to accept the change or press cancel to

5. Reset the correct time as described in to set the clock

appear in the display. daY" appears in the display and the control beeps

once. hour time of day display. The display will show either

"12Hr daY" or "24Hr daY". reject the change. above. Please note that if the 24 hour time of day mode was chosen, the clock will now display time from 0:00 through 23:59 hours