Brother International NX-600 Support Question
Brother International NX-600 Support Question
Find answers below for this question about Brother International NX-600.Need a Brother International NX-600 manual? We have 6 online manuals for this item!
Question posted by bonniezinken on March 3rd, 2015
Problems With Bottom Thread
My thread on the bottom of my quilt keeps bunching up. i have replaces the needle, re threaded the machine and replaced the bobbin. It will sew fine for a few inches and then gets all caught up and bunches. How can I fix this?
Current Answers
Answer #1: Posted by waelsaidani1 on March 9th, 2015 1:30 PM
waelsaidani1
Member since:
May 12th, 2013 Points: 19,501,797
Member since:
May 12th, 2013 Points: 19,501,797
Related Brother International NX-600 Manual Pages
Accessory Catalog - Page 15
... pace as the machine's lower feed dogs to straight stitch. 3. Gently holding the upper and bobbin threads sew about four locking stitches and finish the thread ends. Guide the fabric with the needle to allow fabric to be difficult to sew uniform stitches roughly
1/16" - 3/32" (2.0 - 2.5 mm) in the needle area. Use both hands while keeping the fabric pulled...
Accessory Catalog - Page 33
Each thread has it's own thread guide to deliver thread smoothly to the machine as well as a thread locking system which keeps those loose ends tamed when not in the proper color sequence for your next embroidery, quilting or sewing project. For all models: SA503
Free-Standing Ten Spool Thread Stand
You can set up to 10 spools of thread on...
Accessory Catalog - Page 34
... for brightness and durability to the needle thread. It is ideal for Brother® Embroidery Machines, but compatible with a stabilizer. Available in the 61 color set of fabrics. Dependable thread delivery through machine tensions. Stabilizers and Water Soluble Stabilizers
When doing machine embroidery, the use the Brother Bobbin Thread designed specifically for your instruction...
Accessory Catalog - Page 36
... with the feed dogs and can attach it .
1. This narrow foot has a good surface to get needle felting effects easily on your PQ series! SA159
SA180B SA181
Needle Felting Attachment Felting Needle
Brother Sewing Machine
Attachments for PQ Series
70
Needle Felting Attachment
Use this unique attachment to maintain contact with wool roving or yarn.
Attach the...
Users Manual - English - Page 3
... Store presser feet and bobbins in the operation panel. (page Cover E)
h Sewing speed controller Use the sewing speed controller to thread the needle. g Operation panel Select a stitch from those that appear in the accessory compartment of the sewing machine and their functions are described below. CONTENTS
GETTING READY SEWING BASICS UTILITY STITCHES
Names of Machine Parts and Their...
Users Manual - English - Page 5
...
start or stop button to start sewing
Orange:
When the bobbin winder shaft is moved to the right for winding the bobbin thread onto the bobbin
b Reverse/reinforcement stitch button
Press the reverse/reinforcement stitch button to cut , otherwise the needle may break, the threads may become tangled or damage to the machine may occur.
f Presser foot lever...
Users Manual - English - Page 6
... selecting an item displayed on threading the upper thread, installing the bobbin, winding the bobbin and replacing the presser foot can be displayed. j Stitch keys Use these keys to quickly select one of 12 of stitch. Simple descriptions on the screen.
d + key Press this key to apply the selected item. b Sewing machine help key
Press this key...
Users Manual - English - Page 19
CONTENTS
GETTING READY SEWING BASICS UTILITY STITCHES
Checking machine operating procedures
Simple descriptions on replacing the presser foot, threading the upper thread, winding the bobbin and installing the bobbin can be displayed in this Operation Manual.
X The sewing machine help key) in the b operation panel. Turn on .
Note
z For details on each topic, refer to the previous...
Users Manual - English - Page 24
... the sewing machine. Be sure to observe the following precautions concerning the bobbin.
Use of the same type (part code: SA156, SFB (XA5539-151)).
11.5 mm (7/16 inch)
Actual size
This model
Older model
Winding the bobbin
Wind the thread around the bobbin to wind the thread onto the bobbin, and then insert the bobbin thread. GETTING READY SEWING BASICS UTILITY STITCHES
GETTING READY...
Users Manual - English - Page 25
... touches the right end of thread for the bobbin onto f the spool pin. Lift open the upper cover. Slide the spool cap onto the spool pin. The medium-sized spool cap is already on the sewing machine.
d
• Three spool cap sizes are available (large, medium and small). CONTENTS
GETTING READY SEWING BASICS UTILITY STITCHES
Turn...
Users Manual - English - Page 26
...
for bobbin winding,
and then wind it counterclockwise between the discs.
1
1
GETTING READY SEWING BASICS UTILITY STITCHES
While holding the spool with your right hand to the right and pass it through l the slit in the spool or the needle may break. Pull the thread to wind the free end of k the thread that best fits...
Users Manual - English - Page 27
... wound, otherwise the needle may bend or break when the bobbin thread starts to run out.
APPENDIX
INDEX
Winding/Installing the Bobbin 21 CONTENTS
GETTING READY SEWING BASICS UTILITY STITCHES
CAUTION
● Be sure to cut the end of the thread p wound around the bobbin. If the bobbin is turned after winding the thread around the bobbin, the machine will be incorrect...
Users Manual - English - Page 28
... this sewing machine.
Lightly hold c the end of the same type (part code: SA156, SFB (XA5539151)).
11.5 mm (7/16 inch)
Actual size
This model
Older model
• Be sure to thread the machine as indicated. a
1
2
Pass the thread through the shuttle is indicated by marks around the shuttle. GETTING READY SEWING BASICS UTILITY STITCHES
GETTING READY
Installing the bobbin
Install...
Users Manual - English - Page 33
...Threading the needle
Lower the presser foot lever.
d
1
GETTING READY SEWING BASICS UTILITY STITCHES
APPENDIX
2
3
a Thread guide discs b Pass to "Needle types and their uses" (page 34). Release the needle threader lever. For more details on the needle, refer to the back. c Pass through 100/16.
e
Carefully pull on the left hand, hold the end of the machine.
1
a 5 cm (2 inch...
Users Manual - English - Page 55
... machine.
1
Once you are ready to start sewing, slowly e press down on the foot controller increases the sewing speed; When the end of the stitching is stopped, the needle remains lowered (in the fabric).
releasing the pressure on the sewing machine.
z When sewing is reached, f completely release the foot controller. The machine can be used on this machine model NX-600...
Users Manual - English - Page 59
... the wrong side of the fabric, the upper thread is too loose.
5 1
2
■ Correct thread tension The upper thread and the bobbin thread should cross near the center of the fabric. CONTENTS
GETTING READY SEWING BASICS UTILITY STITCHES
Adjusting the Thread Tension
The tensions of the upper thread and of the bobbin thread (thread tension) should be visible from the wrong side...
Users Manual - English - Page 68
... the curve. If the needle remained up the machine with your sewing projects are described below.
Trial sewing
Sewing curves
After you have set up when the machine stopped sewing, press (Needle position button) to these tips when sewing your project, and check the thread tension and stitch length and width. SEWING BASICS
CONTENTS
GETTING READY SEWING BASICS UTILITY STITCHES
Useful...
Users Manual - English - Page 88
GETTING READY SEWING BASICS UTILITY STITCHES
UTILITY STITCHES
CONTENTS
CAUTION
● When sewing, be sure that the needle does not touch the button, otherwise the needle may bend or break. Tie together the ends of the bobbin thread at the end and at the beginning of the stitching at the end of the g stitching to the wrong side...
Users Manual - English - Page 108
..."Selecting stitching" (page 66).
2 1
a Tear b 2 mm (1/16 inch) Pass the upper thread down through the hole in the presser foot. • When lowering the presser ...needle is 2 mm d (1/16 inch) in the front of the presser foot, otherwise the darning will not be sewn with a maximum length of about
28 mm (1-1/8 inch) can be sewn.
Darning is sewn as shown below.
1
CONTENTS
GETTING READY SEWING...
Users Manual - English - Page 149
... knots or tangles in the thread. Replace the shuttle. Incorrect bobbins will not work properly. Replace the needle plate. If the thread is too big for the spool being used, or the thread has come out of thread being used . CONTENTS
GETTING READY SEWING BASICS UTILITY STITCHES
Symptom
Probable Cause
Remedy
The upper thread was not threaded correctly (for example, the spool...
Similar Questions
I Need To Replace Bobbin Assembly On My Brother Hs100 Computer Sewing Machine.
how to replace bobbin winder assembly on brother HS100 computer sewing machine
how to replace bobbin winder assembly on brother HS100 computer sewing machine
(Posted by Boyersewcrazy 5 years ago)
My Machine Keeps Saying Lower Pressure Foot Lever! It Won't Do Anything?
(Posted by Brendave888 9 years ago)
Brothers Nx-600 Sewing Machine Service/repair Manual
I am looking for the service/repair manual for the Brothers NX-600 sewing machine.
I am looking for the service/repair manual for the Brothers NX-600 sewing machine.
(Posted by Anonymous-125326 10 years ago)
Needle Will Not Grab Bobbin Thread On Brother S-6200a Sewing Machine. What Up
(Posted by charlesjeffries 11 years ago)
Sewing Speed Will Not Change From Slow
Speed.
(Posted by pinks52 12 years ago)