How Do You Thread A Brother Ls 202

https://support.brother.com/g/b/faqend.aspx?c=au&lang=en&prod=hf_ls2150eas&faqid=faqh00000467_000#:~:text=How%20do%20I%20thread%20my%20machine%3F%201%20Turn,channel%20on%20the%20front%20of%20the%20machine.%20

---

Please respond to my effort to provide you with the best possible solution by using the "Acceptable Solution" and/or the "Helpful" buttons when the answer has proven to be helpful.

Regards,
Sonu
Your search handyman for all e-support needs!!

Brother LS2020 is a popular basic sewing machine. This version is good for beginning sewers and quilters who need basic stitching capability without adding a lot of stitch variety. Your sewing machine must be threaded correctly for it to run and sew without errors. Thread the machine in the right order and you may avoid broken threads and skipped stitches.Step 1

Turn off the power switch to avoid accidentally causing any of the parts to move. Locate the presser foot lifter lever, which is above the needle and to the right. Lift this lever.

Step 2

Grasp the wheel at the upper right edge of the machine and give it a slight turn. This will cause the thread takeup lever and the needle to rise. Keep turning until the needle is at the highest point that it will go.

Step 3

Place the spool of thread on the thread spindle with the loose end of the thread coming out the back of the spool. If the loose thread is at the front, turn the spool upside down and put it back on the spindle.

Step 4

Pull the end of the thread to the left until you reach the thread guide, which is a small U-shaped metal part sticking out of the top of the machine. Loop the thread through the guide and then down the front of the machine from that point. A groove in the front of the machine will guide the thread at this point.

Step 5

Loop the thread between the tension disks at the bottom of the groove, wrapping from the right, down and back up on the left. You will find a slot here, which will help to guide the thread. Hold the thread end in your left hand and the spool in your right hand. Pull the thread end gently to make the thread loop slip between the two tension disks.

Step 6

Pull the thread up along the slot on the left until you reach the takeup lever, which is at the top of the slot. Slide the end of the thread through the slot in the takeup lever.

Step 7

Pull the end of the thread straight down until it is at the front of the needle. Thread the needle from front to back, leaving a 2-inch tail of thread hanging out the back of the needle.

---

Please Accept my answer by providing you with the best possible solution. Would be more glade.
THANK YOU

To thread your Brother International LS-2020 sewing machine, please follow these steps:

1. Turn off your sewing machine and unplug it from the power source for safety.

2. Raise the presser foot by using the presser foot lever located behind the needle area. This releases the tension and allows easier threading.

3. Place a full spool of thread on the spool pin, which is usually located on the top of the machine. Ensure that the spool rotates freely.

4. Take the end of the thread and insert it through the thread guide located at the top of the machine. Follow the indicated path to guide the thread down towards the needle area.

5. On some machines, the thread may need to be guided through a numbered series of threading points. Check your machine's threading diagram or the manual to identify the numbered points and guide the thread through them. This ensures proper tension and thread pathway.

6. Locate the tension disc and thread it accordingly. Usually, you need to lift the presser foot lifter to release the tension discs and guide the thread between them. Then release the presser foot lifter to engage the discs.

7. Now, pass the thread through the take-up lever, which is a small hook or loop mechanism. This is typically located above the needle area. Follow the threading path indicated or specified in the diagram.

8. Finally, thread the needle from front to back. You may find it helpful to use a needle threader, if your machine has one, to make the process easier.

9. To ensure proper threading, hold the thread with one hand and manually turn the handwheel towards you. This helps to lower the needle and bring up the bobbin thread.

10. Pull both threads towards the back of the machine, leaving a tail of a few inches.

11. You are now ready to sew! Be sure to lower the presser foot before starting. Remember to consult your specific model's manual or threading diagram for more accurate guidance as the threading process may vary slightly from machine to machine.

If you no longer have the manual, you might be able to find it on the Brother International website or contact their customer support for assistance.

---

I hope this is helpful? PLEASE "ACCEPT" and mark it "HELPFUL" to complement my little effort. Hope to bring you more detailed answers.

Helphero