Sharp XV-Z12000 Support Question
Sharp XV-Z12000 Support Question
Find answers below for this question about Sharp XV-Z12000 - SharpVision - DLP Projector.Need a Sharp XV-Z12000 manual? We have 2 online manuals for this item!
Question posted by Bobbyosborne83 on October 20th, 2015
Lamp Replacement
I replaced lamp. Projector still prompted me to change bulb. It then shut down before I could reset the timer and hasn't turned back on since... Note when I took the original lamp out I lost one of the screws inside the housing?
Current Answers
Answer #1: Posted by TechSupport101 on October 20th, 2015 8:01 PM
TechSupport101
Member since:
May 24th, 2013 Points: 12,171,305
Member since:
May 24th, 2013 Points: 12,171,305
Hi. Steps on resetting the timer on page 83 of the Operation Manual and the reset normally performed on the service menu and not the main menu. Otherwise, there is a Service Manual here http://elektrotanya.com/sharp_xv-z12000.pdf/download.html that should be able to help you get back up and running in case the screw or any other area (outside timer reset) is causing power on issues.
Related Sharp XV-Z12000 Manual Pages
XVZ12000 Operation Manual - Page 2
... SCREWS. NO USER-SERVICEABLE PARTS EXCEPT LAMP UNIT. ONLY
XV_Z12000_E_US_p01_04.p65
1
-1
03...projector.
1. Model No.: XV-Z12000 Serial No.:
There are two important reasons for prompt warranty registration of light. CAUTION
RISK OF ELECTRIC SHOCK. ment. Before recycling the packaging, please be of actual set. Be especially
careful that you will promptly receive any unauthorized changes...
XVZ12000 Operation Manual - Page 3
... cord. ONLY
Declaration of Conformity
SHARP PROJECTOR, MODEL XV-Z12000 This device complies with Part 15 of mercury. Caution Concerning the Lamp Replacement
See "Replacing the Lamp" on , the user is no ... environmental considerations. However, there is encouraged to try to correct the interference by turning the equipment off
and on pages 80-82. If this product include confidential and...
XVZ12000 Operation Manual - Page 8
... 78 for long hours continuously will blink in and turn off, the
temperature warning indicator on the projector. The projector may change during projection or cooling fan operation. Do not block the intake and exhaust vents.
Do not subject the projector to rise, the lamp will turn on the projector will blink,
and after a 90-second cooling-off...
XVZ12000 Operation Manual - Page 11
...
For selecting menu items.
ENTER button 43
For setting items selected or adjusted on the lens. Replace the lamp when the indicator illuminates red.
34 Power indicator
Illuminates red, when the projector is explained. When the power is turned on, this operation manual, the illustration and the screen display are simplified for explanation, and...
XVZ12000 Operation Manual - Page 14
... the battery compartment.
• Batteries of different types have run out, as possible with this projector may malfunction under a fluorescent lamp. Remote control
Note
• The signal from the remote control if you will not be used to replace them using a cloth.
• The batteries included with new batteries when they are included in...
XVZ12000 Operation Manual - Page 35
... button
Note
• The lamp indicator illuminates, indicating the status of the lamp. Info • The language preset at least 30 seconds after the power has been turned on, and then transmit the commands.
If you want to change the on-screen display to another language, reset the language according to illuminate.
• When controlling the projector...
XVZ12000 Operation Manual - Page 72
RS-232C Off Function
This projector consumes power when using the SharpVision Manager Software. Select "RS-232C Port" in standby.
Note
• Set "RS-232C Port" to "ON" ... set to "OFF" to reduce the power consumption of the projector. XV_Z12000_E_US_p66_74.p65
71
Status
ON (Low power mode) OFF (Standard mode)
Brightness 80% 100%
Lamp power consumption
220 W
270 W
03.9.24, 2:06 PM...
XVZ12000 Operation Manual - Page 79
....
• Please exercise care when replacing the lamp. sures. Power indicator
Blue on*/ Red on
Red blinks
The power indicator blinks in the
lower left corner of use reach 2,000, " " will change to red, the lamp will automatically turn off and then the projector will be sure to your nearest
down
Authorized SharpVision Service
• Internal circuit...
XVZ12000 Operation Manual - Page 80
...cord from the AC outlet, replace the power cord in the AC outlet and then turn the power on again.
• If you want to clean the air vents during projector operation, be lit.
Appendix
...and the projector enters the standby mode, follow the possible solutions on the previous page and then wait until the projector has cooled down completely before plugging in red and the lamp may ...
XVZ12000 Operation Manual - Page 81
....
Because the gas in this projector is backed by following the instructions described in this projector under warranty, including lamp replacement, must be obtained through an Authorized
SharpVision Service Center or Dealer. The lamp will be hot and touching it is recommended that the lamp be replaced with this section. Then carefully change the lamp by a 90-day parts and...
XVZ12000 Operation Manual - Page 92
... CD-ROM (UDSKAA040WJZZ), Projector operation manual (TINS-A970WJZZ), SharpVision Manager operation manual (TINS-B097WJZZ)
This SHARP projector uses a DMD Chip. Specifications
Product type Projector Model XV-Z12000
Video system NTSC 3.58/NTSC 4.43/PAL/PAL-M/PAL-N/PAL 60/SECAM DTV480I/DTV480P/DTV720P/DTV1080I
Display method DLP chip, RGB optical shutter method DLP panel Panel size: 0.8" Display...
XVZ12000 Operation Manual - Page 96
...Correction of defects, in the manner and for a lamp replacement are the responsibility of the nearest Sharp Authorized Servicer, ...Where to Obtain Service:
What to do to Obtain Service:
XV-Z12000 Projector
(Be sure to have Proof of repair. Model Specific Section ...for the Projector Lamp for repair at the Servicer's facility, the Servicer will reinstall it will, at its original container, ...
XV-Z12000 Operation Manual - Page 2
...Projector, please record the Serial Number located on page 14.
WARNING: To reduce the risk of actual set.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: FCC Regulations state that children do not expose this product to persons.
Model No.: XV-Z12000 Serial No.:
There are two important reasons for prompt...NO USER-SERVICEABLE PARTS EXCEPT LAMP UNIT.
Be especially
careful ...
XV-Z12000 Operation Manual - Page 3
..., uses, and can be regulated due to environmental considerations. ONLY
Declaration of Conformity
SHARP PROJECTOR, MODEL XV-Z12000 This device complies with the operation manual, may cause harmful interference to radio communications. FAILURE TO OBSERVE THIS WILL RESULT IN PREMATURE LAMP FAILURE. Ensure the cooling fan has stopped before disconnecting the power cord.
ONLY...
XV-Z12000 Operation Manual - Page 8
...turning off period the projector
will turn on the screen washes out the colors, making viewing difficult. Do not subject the projector...blink in internal temperature, as this projector be performed by an Authorized SharpVision Service Center or Dealer.
ity,...(-20°C to be cleaned more often. See "Replacing the Lamp" on the projector will blink,
and after a 90-second cooling-off ...
XV-Z12000 Operation Manual - Page 35
...: The lamp should be replaced.
•If the projector is English. Info • The language preset at least 30 seconds after the power has been turned on the projector.
• The power indicator illuminates blue. After the lamp indicator illuminates, the projector is warming up. If you want to change the on-screen display to another language, reset the...
XV-Z12000 Operation Manual - Page 79
... warning indicator
About the temperature warning indicator
If the temperature inside the projector. cation, "
" will illuminate in the
lower left corner of use , " " will not turn on the projector a fourth time without replacing the lamp, the projector will be sure to your nearest Authorized SharpVision Service Center or Dealer for advice.
* Blue is off and then the...
XV-Z12000 Operation Manual - Page 81
..., including lamp replacement, must be replaced with a doctor as soon as possible. Then carefully change the lamp by a 90-day parts and labor limited warranty. For the name of this projector is backed by following the instructions described in the bulb cracking. It is used. In case of use or when you contact your nearest Authorized SharpVision Service...
XV-Z12000 Operation Manual - Page 92
...change without notice. Specifications
Product type Projector Model XV-Z12000
Video system NTSC 3.58/NTSC 4.43/PAL/PAL-M/PAL-N/PAL 60/SECAM DTV480I/DTV480P/DTV720P/DTV1080I
Display method DLP chip, RGB optical shutter method DLP... cap (attached), SharpVision Manager Software CD-ROM, Projector operation manual, SharpVision Manager operation manual Replacement parts Lamp unit (Lamp/cage module) (BQC...
XV-Z12000 Operation Manual - Page 96
...XV-Z12000 Projector
(Be sure to have Proof of Sharp to enforce the rights under this Sharp brand product (the "Product"), when shipped in its option, either repair the defect or replace...modified in custom enclosures, projectors connected to third party control and automation systems, and realignment of purchase except for the Projector Lamp for a lamp replacement are the responsibility of ...
Similar Questions
Sharp Xr 10s - Notevision Svga Dlp Projector.
Main board needed. Where can I get? Used is fine. Budget $20
Main board needed. Where can I get? Used is fine. Budget $20
(Posted by sanoorvishwa 8 years ago)
Bulb Explodes
I replaced the bulb and after aprox. 45 hours it loudly "pops" and it was separated and hanging by t...
I replaced the bulb and after aprox. 45 hours it loudly "pops" and it was separated and hanging by t...
(Posted by craig79027 9 years ago)
Lamp Timer Reset Problems
I just purchaced a replacement lamp for the Sharp xvz200 and follow the instructions in the manual t...
I just purchaced a replacement lamp for the Sharp xvz200 and follow the instructions in the manual t...
(Posted by ron81116 10 years ago)
Resetting The Sharp Xv-z90u Projector After Lamp Replacement
I have replaced the lamp in my Sharp XV-Z90U projector, and now when I turn it on, the lamp comes on...
I have replaced the lamp in my Sharp XV-Z90U projector, and now when I turn it on, the lamp comes on...
(Posted by ellenwheeler 10 years ago)
Bracket For This Projector
I have this projecctor and had it in another Thater room. I had to leave the bracket behind. Where d...
I have this projecctor and had it in another Thater room. I had to leave the bracket behind. Where d...
(Posted by aparavi 11 years ago)