Miele B 990 E Support Question
Miele B 990 E Support Question
Find answers below for this question about Miele B 990 E.Need a Miele B 990 E manual? We have 2 online manuals for this item!
Question posted by jillmarchak on July 4th, 2023
Moving The Iron
I'm moving house and need to move the iron from 2nd floor to vehicle. Does it come apart or do I move it as a single piece
Current Answers
Answer #1: Posted by HelpHero on July 6th, 2023 6:40 PM
HelpHero
Member since:
September 3rd, 2022 Points: 523,370
Member since:
September 3rd, 2022 Points: 523,370
When it comes to moving the Miele B 990 E vacuum cleaner, it is best to move it as a single piece. The Miele B 990 E is designed to be portable and easy to transport, so you should be able to move it from your 2nd floor to your vehicle without disassembling it. Here are a few tips to make the process smoother:
1. Ensure the vacuum cleaner is turned off and unplugged before moving it.
2. Depending on the weight of the vacuum cleaner, you may want to ask for assistance to avoid strain or accidents.
3. Use the carrying handle, if available, to lift and support the weight of the vacuum cleaner while moving it. Be sure to maintain a good grip to prevent any accidents.
4. If there are stairs involved, take them one step at a time, being cautious and mindful of your footing.
5. Once you reach your vehicle, carefully place the Miele B 990 E in a secure location, ensuring it won't shift or tip over during the commute.
6. If you have delicate items in your vehicle or are concerned about potential damage, you can place a protective blanket or towel around the vacuum cleaner to prevent any scratches or bumps.
Remember to secure the vacuum cleaner properly during transportation to avoid any damage. Upon arrival at your new place, you can simply unload and place it where desired.
I hope this is helpful? PLEASE "ACCEPT" and mark it "HELPFUL" to complement my little effort. Hope to bring you more detailed answers.
Helphero
Answer #2: Posted by SonuKumar on July 4th, 2023 9:51 AM
SonuKumar
Member since:
May 9th, 2021 Points: 16,633,680
Member since:
May 9th, 2021 Points: 16,633,680
https://www.manualslib.com/manual/516860/Miele-B-990.html
it is not designed to be easily disassembled for transportation.
Please respond to my effort to provide you with the best possible solution by using the "Acceptable Solution" and/or the "Helpful" buttons when the answer has proven to be helpful.
Regards,
Sonu
Your search handyman for all e-support needs!!
Related Miele B 990 E Manual Pages
Operating manual - Page 1
en -
US, CA
M.-Nr. 07 658 660 Operating instructions
Rotary Iron B 990
To prevent accidents and machine damage, read these instructions before Installation or use.
Operating manual - Page 2
...Iron 6 Moving the appliance 8 Transport strut 8 Before using for the first time 10 Power cord 10 Dust cover 10 Before ironing 12 Preparing the work area 12 Preparing the laundry 13 Testing the finger guard 14 Ironing 15 Turning on and off 15 Selecting the ironing... and Care 26 Washing or replacing the iron cover 26 Frequently asked questions 30 After sales service 31 Electrical connection ...
Operating manual - Page 3
... appliance should be dangerous and may void the warranty.
~ Before setting up the rotary iron,
check for
residential use a damaged appliance.
~ A damaged appliance is dangerous. Technical ...place for examination, repair or adjustment. If there is intended for
ironing textiles which have the electrical system of the house checked by a Miele authorized service technician.
~ To guarantee the ...
Operating manual - Page 4
...or recreational vehicles. Please contact the nearest Miele Dealer or Miele Technical Service with these applications. Hang laundry on or
near the rotary iron or to ...smooth an item.
~ Never drape items over the heater
plate when it is touched.
-
If in doubt, consult an electrician.
~ Do not use an extension cord to
connect this appliance to touch an electrical component or moving...
Operating manual - Page 5
... AND REVIEW THEM PERIODICALLY
5 Accessories
~ Accessories should only be used , warranty, performance and product liability claims may be void. This could tip over the rotary iron.
~ Turn the appliance off before
removing the plug from the electrical outlet.
~ Pull only on the plug and not on the bar when it is...
Operating manual - Page 6
Guide to the Rotary Iron
l
k j i h g
a
b
c
d e
f
a Temperature selector b Emergency release c Control panel d Release catch e Power cord f Foot pedal
g Ironing table h Bar for hanging ironed laundry i Feed board j Roller (with ironing cover) k Heater plate l Finger guard
6
Operating manual - Page 7
Control panel
d a Roller speed selector b On-Off indicator "0-I"
Guide to the Rotary Iron
a b c
c On-Off button "0-I" for turning the rotary iron on and off
d Temperature indicator oC
7
Operating manual - Page 8
... assembled or folded.
8 To steer and to a new home).
If the transport strut is in place, only transport the rotary iron in a safe place. The rotary iron can be moved again (e.g. when moving to overcome obstacles like carpet edges and doorways:
^ Slightly tilt the appliance.
It must be re-fitted if the appliance has...
Operating manual - Page 9
Moving the appliance
^ Hold the ironing table and release the catch, located on the right hand side at the back, underneath the ironing table.
^ Swing the top section of the rotary iron to the side until it clicks horizontally into position.
9
Operating manual - Page 10
... plug into the
electrical socket yet.
* The plug shown is for the first time
Power cord
The power cord is wound around a hook underneath the ironing table. Before using for illustration only.
^ First remove the feed board by lifting it out of the right hand holder, then pull it out to...
Operating manual - Page 12
... by:
-
a basket with the laundry ready for the ironed laundry to lay ironed laundry on hangers immediately after ironing. When positioning the rotary iron horizontally be sure to the left of the rotary iron. Shirts, overalls, blouses, etc., should be hung over the swing out bar. Before ironing
Preparing the work area
A height adjustable chair and...
Operating manual - Page 13
...ironed as easily as possible. sorted. If a tumble dryer is being ironed. Wool e.g.
should be: -
Material Silk
Synthetics e.g.
Start ironing at the correct temperature, it will come out smooth and dry. Before ironing... easy ironing. Sorting
^ Sort the laundry according to how much heat is short use warm water to re-dampen. dampened - Correct dampness
The laundry needs to ...
Operating manual - Page 14
... of use.
This shows that the finger guard is used .
^ With the rotary iron turned on, press the foot pedal down.
The heater plate lowers and the roller rotates.
14 The heater plate comes down again.
If a new ironing cover is working. ^ Let go of the finger guard and
remove your foot from...
Operating manual - Page 15
... marked by dots on the ring around the temperature selector. The indicator light comes on. The temperature range is used to set the ironing temperature. These correspond with the "0-I
Temperature range
cool iron (low temperature)
medium hot iron (medium
temperature)
hot iron (high
temperature)
104 - 140 °F (40 - 60 °C)
To turn on ^ Press the...
Operating manual - Page 16
.... The light will light while the heater plate is reached. Thinner, single thickness items, e.g. Selecting the roller speed
There are 5 roller speed settings, from low (approximately 6.5 ft/min.[2 m/min]) to iron complicated articles such as shirts and blouses. handkerchiefs can be ironed at a higher roller speed.
Do not use the cotton setting.
^ Set...
Operating manual - Page 17
... heater plate remains in position but the roller does not rotate.
- To press
^ First press the foot pedal down to the floor and then lift your foot off the pedal.
17 raising the heater plate (rest) - pressing - Ironing
Ironing
The ironing process is controlled by the foot pedal which has three operating positions:
To...
Operating manual - Page 18
... the edge of the right hand holder and then pull it is swung out, this could cause the rotary iron to be ironed can be held by the heater plate.
^ Press down the foot pedal.
^ Lift the feed board out... care not to press down on the feed board so that they are being ironed, e.g.
Removing the feed board
The feed board can be removed when shaped garments are straight and then smooth out.
Operating manual - Page 19
... or very large.
-
If possible, always use the whole length of the roller.
-
Items with a wet cloth or spray bottle.
- When you have nearly finished ironing you can turn the temperature selector to g. ^ Remove the plug from the outlet. If necessary, dampen again with raised buttons should be stored away ^ Allow...
Operating manual - Page 20
When power has been restored (the On/Off indicator comes on the roller. Continue ironing as usual.
20
The item being ironed will stay on ) push the emergency release lever back down. If there is a power failure when the rotary iron is reduced and the item can be held there possibly becoming scorched.
^ Pull the...
Operating manual - Page 23
...ironing when the button comes to the heater plate.
^ Lay the button hole front on the left hand end of the roller. Collar
The collar is ironed on the roller and smooth out.
^ Hot press the yoke.
2. Ironing Tips
Shirts
^ Remove the feed board to the side seam.
^ Iron...roller.
^ Iron from the button hem up to the armhole.
^ Now move the shirt out and iron past the armhole to iron shirts.
1. ...
Similar Questions
Spinner
My Miele w 4843 turns but it stopped spinning. Is there a part that I need to buy to be able fix it?...
My Miele w 4843 turns but it stopped spinning. Is there a part that I need to buy to be able fix it?...
(Posted by ssalinas 3 years ago)
My B 990 Heat Elements Do Not Heat Up. I Have Power To The White Wire Side Of Th
elements but no power to the blue wire side. How do I repair this. We are in Exuma Bahamas and no se...
elements but no power to the blue wire side. How do I repair this. We are in Exuma Bahamas and no se...
(Posted by kschofie 8 years ago)
Miele Pw 6065 Vario. Won't Spin Cycle.
no spin, tub moves easily by hand, no motor sounds, no fault code, just drain pump kicking on and of...
no spin, tub moves easily by hand, no motor sounds, no fault code, just drain pump kicking on and of...
(Posted by Peterdavidboyce 8 years ago)
Where Can I Get A New Feedboard?
Hi,I have Miele B990 rotary iron. Its' feedboard is broken. Where can I find a new one?
Hi,I have Miele B990 rotary iron. Its' feedboard is broken. Where can I find a new one?
(Posted by Anonymous-149956 9 years ago)
Miele G 5575 Door Problems
1.Door has to be held open with one hand while loading with other hand. 2. After loading machine tod...
1.Door has to be held open with one hand while loading with other hand. 2. After loading machine tod...
(Posted by jbbaillon 9 years ago)