Husqvarna Z246 Support Question
Husqvarna Z246 Support Question
Find answers below for this question about Husqvarna Z246.Need a Husqvarna Z246 manual? We have 2 online manuals for this item!
Question posted by sparkybob817 on March 8th, 2017
Park Brake Adjustment
When starting mower it moves to the left how and where do i make the adjustment to the park braket
Current Answers
Answer #1: Posted by Odin on March 8th, 2017 7:14 PM
Odin
Member since:
April 10th, 2010 Points: 41,236,660
Member since:
April 10th, 2010 Points: 41,236,660
Husqvarna suggests 4 possible causes
- Park brake on
- EZT Bypass linkages engaged
- Drive belt for the transmission is slack or has come off
- Air trapped in hydraulic system
For further guidance, you can call the company: use the contact information here--https://www.contacthelp.com/husqvarna/customer-ser....
Hope this is useful. Please don't forget to click the Accept This Answer button if you do accept it. My aim is to provide reliable helpful answers, not just a lot of them. See https://www.helpowl.com/profile/Odin.
Related Husqvarna Z246 Manual Pages
Owners Manual - Page 3
... 21
Jumper Cable Use 22 Battery Voltage Light 22 Moving Machine By Hand 23 MAINTENANCE 24 Maintenance Schedule 24 Battery 26 Safety System 27 Park Brake 27 Tire Pressures 27 Caster Wheels 28 Anti-scalp Rollers 28 V-belts 28 Deck Belt Removal 28 Adjusting the Mower Deck 29 Leveling deck 29 Cutting Blades 30 Blade...
Owners Manual - Page 4
... machine's special characteristics and who operate this operator manual, left and right, backward and forward are documented. Operating instructions...on mower.
Accident prevention regulations, other hazards.
The following of instructions (use in accordance with these instructions and common sense. Make ...Lawn mowers and all who are also knowledgeable about the safety instructions.
Owners Manual - Page 6
Park Brake
Start
Cut Height Low
Cut Height High
Blades
Steering Controls
Headlights
Battery
Do not stand here
Battery acid is a potential for
other people Keep away from ...
Owners Manual - Page 7
... backing, look down and behind and down before operating a riding lawn mower. CHILDREN CAN BE SERIOUSLY INJURED OR KILLED BY THIS EQUIPMENT.
Keep...the blades shut off blades, move the steering control lever outward to the park brake position and stop before cleaning...with the instructions, to a complete stop the engine before starting.
• It is clear of bystanders before and while ...
Owners Manual - Page 9
...; Never use and leave space for the mower deck's drive belt is desired.
•...park brake operation frequently. Use protective glasses for the machine.
• The mulch blades should only be started
until problem has been resolved. • Check the fuel level before starting.
• Never make...refuel it last. • Do not make adjustments or repairs with the engine running the ...
Owners Manual - Page 13
... could be adjusted. Use extra care when using the two steering controls. Do not attempt to the right. Release the park brake before dismounting....moved outward.
To release the park brake, rotate both controls an equal amount forward or backward, the machine moves in the neutral position (N), the machine stands still.
If the left . Always set the park brake before moving the mower...
Owners Manual - Page 14
... operation, an oil can icon will appear and stay on for best mower performance and battery charging. Once the engine has started, slowly move the throttle control forward past the start detent to the full throttle position. To service the engine and mower, see the Service Journal of hours the engine has run and indicates...
Owners Manual - Page 17
..., allowing the mower to use a reduced throttle speed and reduced ground speed. DO NOT move the mower under its own...Adjust the engine speed to idle and disengage the park brake by alternating one to accept a new code.
1
2
3. To initialize the ignition system, press the START/STOP
(S/S) button on the ignition switch or sit on turf. Then by moving in a forward direction pull the left...
Owners Manual - Page 18
... fuel tank.
4.
Adjust the seat to the highest position.
5. Raise the mower deck to the desired position.
When the engine has started :
• The blade switch must be pressed down into the disengaged position.
• Both steering / park brake controls must be fulfilled before operating the unit.
Read the sections on the seat. 2. Move the throttle...
Owners Manual - Page 20
..., it to idle at least 60 seconds to -start mode with an operator presence system. The reason for the shutdown must be thrown by pulling the steering / park brake controls inwards to move forward in a straight line. Move throttle control to the desired cutting height. Lower the mower deck to full throttle (rabbit symbol). 4. Disengage the...
Owners Manual - Page 21
... should be increased without poor mowing results.
• When mowing large areas, start mode, press the button to turn on/off .
• Use compressed air to clean top surface of the unit to engage the park brake.
• To restart movement, move the steering controls back to the neutral position.
• Press forward to...
Owners Manual - Page 23
...Moving Machine By Hand
When pushing or pulling the mower, engage the EZT bypass linkages. Release the levers with the head outside the frame and held in the bypass position.
4. Move the steering / park brake... located close to be lifted by driving slowly up and out of the keyhole slots. Make no adjustments without: • the engine stopped, • the ignition switch turned off the ramps...
Owners Manual - Page 24
... Clean around belts, belt pulleys Check the tire pressures Check battery connections Sharpen3)/ Replace mower blades Clean the engine's cooling air intake 2) Clean the foam air cleaner prefilter 2) Clean the paper air cleaner filter cartridge 2) Check/adjust the park brake Inspect muffler/spark arrestor
Before After
1) First change after 8-10 hours. An annual service...
Owners Manual - Page 25
...adjustment checklist
• Engage the park brake. • Place the blade switch in this manual ■ = Refer to penetrate the skin, causing serious injury. MAINTENANCE
MAINTENANCE Check/adjust...air cleaner's foam pre-filter 2)
Check/adjust the mower deck Check the engine valve clearance 3) ... ignition switch OFF. • Make sure the blades and all moving parts have sufficient force to the...
Owners Manual - Page 27
... standing still when applying the park brake. Make daily inspections to start the engine when one of tire liner or foam fill material to the park brake. MAINTENANCE
Safety System
The machine is sufficient braking action. To adjust the park brake, contact the Husqvarna service workshop.
Tire Pressures
All tires should be started when: • the mower deck is found on the...
Owners Manual - Page 28
... on the
belt. Double check belt routing to make sure it matches the decal affixed to tension belt... located on both mandrel housings and secure with the mower on a level surface. Deck Belt Installation
NOTE: ...park brake. 2. Anti-scalp Rollers
Anti-scalp rollers are properly adjusted when they begin to support the deck.
7. Correct if needed. 7. NOTE: The belt guide should be adjusted...
Owners Manual - Page 32
...moves slowly, unevenly, or not at all Park brake on EZT Bypass linkages engaged Drive belt for the transmission is slack or has come off Air trapped in hydraulic system
Mower deck not engaging Drive belt for the mower... in the Cold Weather starting position Clogged ventilation valve on the left and right sides. TROUBLESHOOTING
Problem / Cause
Engine will not start Blade switch is engaged Steering...
Owners Manual - Page 37
... fuel and open the fuel shut off valve
q
Start the engine
q
Check that there is drive to both wheels
q
Check the mower deck adjustment
q
Check:
Safety switch for the park brake
q
Safety switch for the mower deck
q
Safety switch in the seat
q
Safety switch in the steering controls
q
Park brake functionality
q
Driving forward
q
Driving backward
q
Engaging the blades...
Owners Manual - Page 38
...mtr reading, stamp, sign
q
25-Hour Service
Check the fuel pump's air filter Sharpen/Replace mower blades if required Check the tire pressures Check battery cables Lubricate according to lubrication chart Check / ...conditions) Change engine oil Lubricate according to lubrication chart Check/adjust the park brake
38
Date, mtr reading, stamp, sign
q q q q q q q
Date, mtr reading, stamp, sign
q q q...
Owners Manual - Page 40
...-filter (300 hours) Replace the air filter's paper cartridge Change the engine oil (50 hours) Replace the engine oil filter (100 hours) Check / adjust the cutting height Check / adjust the park brake (50 hours) Clean / change the spark plugs (100 hours) Change the fuel filter (100 hours) Check the engine valve clearance
Date, mtr...
Similar Questions
Mower Won't Start And Is New Since July 2021
mower won't start and I believe the levers aren't set right for parking brake.I don't understand how...
mower won't start and I believe the levers aren't set right for parking brake.I don't understand how...
(Posted by dilbeckcarmen 2 years ago)
Engine Shouts Down
when when pulling in direction lever engine shuts off
when when pulling in direction lever engine shuts off
(Posted by clydemattson 2 years ago)
Brand New Z246 Used It Once Worked Great, Now The Blades Wont Engage.
(Posted by damiencavazos66 9 years ago)
Parking Brake Adjustment
How do I adjust the parking brake on my RZ5426 zero turn mower? When I apply the parking brake, it s...
How do I adjust the parking brake on my RZ5426 zero turn mower? When I apply the parking brake, it s...
(Posted by raider47112 10 years ago)