Husqvarna SC18 Support Question
Husqvarna SC18 Support Question
Find answers below for this question about Husqvarna SC18.Need a Husqvarna SC18 manual? We have 1 online manual for this item!
Question posted by Anonymous-166303 on May 20th, 2020
Oil
what kind of oil should I use for this sc18 sod cutter
Current Answers
Answer #1: Posted by ProfessorExpert on May 20th, 2020 10:35 AM
ProfessorExpert
Member since:
May 18th, 2020 Points: 100,920
Member since:
May 18th, 2020 Points: 100,920
The best oil to use if the SAE 90 gear oil.
You can find it most places for under 5 bucks.
Please respond to my effort to provide you with the best possible solution by using the "Acceptable Solution" and/or the "Helpful" buttons when the answer has proven to be helpful. Please feel free to submit further info for your question, if a solution was not provided. I appreciate the opportunity to serve you!
Get 75 dollars for free by signing up at the below link.
https://app.joinupvoice.com/referral/XsQvDdwl5gAICys3#
Answer #2: Posted by hzplj9 on May 21st, 2020 9:32 AM
hzplj9
Member since:
June 25th, 2012 Points: 4,875,710
Member since:
June 25th, 2012 Points: 4,875,710
Link to a user guide if you don't have one:
https://www.manualslib.com/manual/73956/Husqvarna-Sc18-968981201.html#product-SC18
Good luck.
Related Husqvarna SC18 Manual Pages
Owners Manual - Page 1
Models:
SC18/968981201 SC18/968999352
MANUAL NO. 540200156 REV. 01 (12/01/05) Operators manual
Please read these instructions carefully and make sure you understand them before using the machine.
Owners Manual - Page 2
...
Specifications 2 Features and Controls 3 General Operating Instructions 4 Warnings ...4
Operating Instructions Page
Operator's Tips 4 Operating on Hills 5 Before You Start 5 Transporting 5 Sod Cutting 5
Maintenance and Service Instructions Page
Safety and Maintenance 6 Safety ...6 Engine Service and Warranty 6 Lubrication Schedule 6 Inspection Schedule 6 Blade Wear 7 Cleaning...
Owners Manual - Page 3
... Grease part #788067B or equivalent.
3 Reducer (yellow cap)
Transmission grease used in the engine (gray cap) 1. Refer to your engine manual for transmission.
4. Refer to service the transmission. Transmission is no dipstick for oil type, viscosity, weight
and capacity. Oil used
1. FEATURES AND CONTROLS
Oil used in the Clutch/Gear Box 1.
You should not need to...
Owners Manual - Page 4
...equipment should not be void if changes are used throughout the manual to alert you may result in the safe operation and proper maintenance of the sod strip as the blade rises. • ...depth may not only affect the equipments performance and durability, but also create safety hazards for sod cutting only. Warranty will be modified without our written permission may be avoided, such as...
Owners Manual - Page 5
... Put the sod cutter into the ground 2 to absorb the moisture. With these factors in transport position before cutting? Back up ramps in reverse gear, then cut a short
distance, then stop. Page 3 1. Use a garden hand spade,... START • Read and understand this manual. • Be sure engine oil is very compacted, a simple test as clay soil that when operating on hills, you may...
Owners Manual - Page 6
...Depth adjuster
Each Use X X X X X
X
X X X
Every 20 hrs
X X X
B) Lubrication Schedule
Item
Lubricant
• Engine Oil, see engine
owner's manual
• Chain 30W Motor oil or
Chain lubricant
• Linkage 30W oil
• Grease... for engine service and warranty questions. TWO MINUTE WARNING Sod Cutters may result from the manufacturer
will void all manufacturer's warranties. ...
Owners Manual - Page 7
...oil or mil board paint blade to Warning Decals, Operator Instruction Labels, Bearings, Chain and Engine. SERVICE AND MAINTENANCE
BLADE WEAR Sod cutter blades may wear quickly depending on the chain idler until the #40 chain flexes approximately 1/4" ( 6mm) at
mid span. • Install chain guard. • Set sod cutter back to level. Note: Use... • Tilt the sod cutter forward onto the front ...
Owners Manual - Page 9
... (see if the cutting surface is not available, add a 1/2"
stack of blades from top only. Use blue loctite on the belt will cause it to 1 1/2" from the chassis wall.
2. If additional...cutting edge to the
Transmission Output Sprocket. Note:Gear box pulley has double set screws.
Moisture, oil or grease on the set screws.
2.
If blade is dull or improperly sharpened, sharpen it has...
Owners Manual - Page 10
...in pulley and squeeze bracket sides to minimize the gap to see if the Tension Cable is being used . Reattach or replace as necessary. 5. Limit maximum depth of pulley. See Technical Bulletin "Throttle Cable... so idler pulley clears Belt Keeper when engaged. 2. Belt tension can be too high. Used Unit or Old Belt: 1. Belt Idler Pivot Bolt may be increased by comparing with the...
Owners Manual - Page 11
...before checking clearance of pulleys. Adjust tap bolt for Belt Tension."
11. Flood frozen joints with belt removed. Use Grade 8 bolts with lock nuts to bolt wheels to creep, contact your local Honda dealer
or servicing dealer.
... tighten all pulleys, Belt Idler Pulley, Engine Pulley, Right Angle Drive Pulley with penetrating oil. Only cut in neutral - Tire wear is adjusted correctly.
Similar Questions
Type Of Oil
what type of oil use the Husqvarna PW 3100 pressure washer?
what type of oil use the Husqvarna PW 3100 pressure washer?
(Posted by fymgrau 5 months ago)
Gas Oil Mix Ratio For Older Model 322l
what is the correct gas oil mix ratio for an older model 322l husqvarna weed eater string trimmer
what is the correct gas oil mix ratio for an older model 322l husqvarna weed eater string trimmer
(Posted by jd3gilbert 11 months ago)
Pressure Washer
mod.020524-00 Changing Pump OilNOTICE When changing pump oil, use only high qualitySAE 30 weight oil...
mod.020524-00 Changing Pump OilNOTICE When changing pump oil, use only high qualitySAE 30 weight oil...
(Posted by malingowski1 3 years ago)
