Haier HLP21N Support Question
Haier HLP21N Support Question
Find answers below for this question about Haier HLP21N.Need a Haier HLP21N manual? We have 2 online manuals for this item!
Question posted by Snanco on June 9th, 2021
Water Leaks Under Machine
I replace the belt end it is running better however now it is leaking water under the machin
Current Answers
Answer #1: Posted by Odin on June 10th, 2021 6:30 AM
Odin
Member since:
April 10th, 2010 Points: 41,236,660
Member since:
April 10th, 2010 Points: 41,236,660
It could be the drain pump or the drain hose. See https://www.repairclinic.com/RepairHelp/How-To-Fix-A-Washing-Machine/45-198-913166-/New/Haier-Washer-Leaking-Water-hlp21n. This page will also refer you to purchase information for the part you may need.
Hope this is useful. Please don't forget to click the Accept This Answer button if you do accept it. My aim is to provide reliable helpful answers, not just a lot of them. See https://www.helpowl.com/profile/Odin.
Answer #2: Posted by techyagent on June 10th, 2021 6:29 AM
techyagent
Member since:
June 17th, 2014 Points: 4,799,780
Member since:
June 17th, 2014 Points: 4,799,780
Leaks under the washer are commonly caused by a damaged water pump or compromised hoses connected to the pump. Usually, you will notice lots of rumbling or shaking from the machine during a wash cycle if the pump is faulty. The water pump in a washer is generally located at the bottom of the machine.
https://restorationmasterfinder.com/restoration/wa...:~:text=Leaks%20under%20the%20washer%20are,the%20bottom%20of%20the%20machine.
Thanks
Techygirl
Answer #3: Posted by SonuKumar on June 10th, 2021 9:05 AM
SonuKumar
Member since:
May 9th, 2021 Points: 16,633,680
Member since:
May 9th, 2021 Points: 16,633,680
https://www.manualslib.com/manual/837407/Haier-Hlp21n.html
Common solutions for: Haier Washer leaking water
The drain pump pumps water out the drain hose. If the drain pump is cracked or damaged, or if the bearings are worn out, the drain pump may leak water. ... For this reason, if the tub seal is leaking water, replace both the tub seal and the tub bearings.
https://www.youtube.com/watch?v=KGacFF6O9T8
https://www.fixya.com/support/t14391839-haier_hlp21n_water_inlet_leaking
https://www.haierappliances.com/support/support-content/35072
Please respond to my effort to provide you with the best possible solution by using the "Acceptable Solution" and/or the "Helpful" buttons when the answer has proven to be helpful.
Regards,
Sonu
Your search handyman for all e-support needs!!
Related Haier HLP21N Manual Pages
Energy Guide Label - Page 1
... based on eight wash loads a week and a 2007 national average electricity cost of 10.65 cents per therm.
Clothes Washer Capacity:Compact
Model HLP21N
Estimated Yearly Operating Cost
(when used with an electric water heater)
$23
$19
$49
Cost Range of Similar Models
214KWh
Estimated Yearly Electricity Use
$14
Estimated Yearly Operating Cost...
User Manual - Page 3
...to this Haier product.
Unpack the Washer 9 Step 2 - Level the Washer 12 Step 6 - Connect the Water Hose 13 Step 8 - Load the Washer 20 Step 4 - For future ...Step 7 - Route Drain Hose (Optional 10 Step 3 - Prepare and Sort Laundry 19 Step 2 - Staple your new washer. TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS 2 Installation Safety Precautions 2 General Safety ...
User Manual - Page 4
... only for its intended purpose as described in this user
manual.
• Do not use the washer for commercial clothes washing. • This washer has only one water inlet hose for filling the wash basket with
cold water. INSTALLATION SAFETY PRECAUTIONS
DANGER
Suffocation Hazard Before you throw away your old appliance, remove...
User Manual - Page 5
...area around your washer by or near
children. Do not allow children to service, repair or replace any maintenance or cleaning. NOTE: Turning the cycle selector knob to the wash water. Always grasp...the power supply before attempting any part of the appliance
unless specifically recommended in the wash water. These substances give off vapors that could ignite or explode.
• Do not ...
User Manual - Page 7
... INSTRUCTIONS
TOOLS NEEDED
• Pliers • Wrench • Phillips Screwdriver
• Measuring Tape • Carpenter's Level
PARTS SUPPLIED
• Drain Hose Hook
• Water Hose
(flat washers pre-installed)
FRONT FACE TO FLOOR
• Bottom Panel
• Bottom Panel
Screw (6)
• Caster (4)
• Caster Wrench
• Quick Sink Faucet
Adapter
•...
User Manual - Page 8
... the back of the connection on a solid floor to temperatures below 32°F (0°C). LOCATION REQUIREMENTS • The washer must be installed on the
washer.
• Only connect to the washer. Water remaining in the washer will be exposed to minimize vibration during the
spin cycle.
A concrete floor is protected from direct sunlight and heat...
User Manual - Page 9
The minimum diameter of 20 gal. (76 L). Wall
Floor
31½" - 47¼" (80 cm - 120 cm)
LAUNDRY TUB
The laundry tub must have a minimum capacity of the standpipe must be 2" (5 cm). The height of the washer. DRAIN SYSTEM REQUIREMENTS
WALL OR FLOOR STANDPIPE
The height of the standpipe must be between 311/2" (80...
User Manual - Page 14
... that all four feet are firmly in contact with the floor and that the water and drain lines are not strained or pinched. Turn clockwise to extend (raise the washer) or counterclockwise to adjust the height. Stand the washer upright. Loosen the adjustable large, outer ring, and then turn the center foot clockwise...
User Manual - Page 15
... the drain hose in each end of the water
inlet hose. STEP 7 - Replace with new hose every 5 years. 1. CASTERS
Using the caster wrench turn the locking nut on the laundry tub. Raise
Lower
Locking Nut
STEP 6 - CONNECT THE WATER HOSE
IMPORTANT: Only use a new hose when installing the washer. Flat washers are pre-installed at the factory...
User Manual - Page 16
...inlet hose onto the water faucet by hand onto the inlet valve on the valve threads.
Turn on the valve threads. OPTION 1 - If there is any leaking, check for leaks.
IMPORTANT: To ... order for this washer to meet the regulated energy standards, the faucet supplying the water must be set to cold. 1. Thread the grey end of the washer until snug. Thread the white end of the inlet ...
User Manual - Page 17
... Threads
Rubber Washer
Silver Faucet Connector
Quick-sink Faucet Adaptor
Water Inlet Hose
4....washer in the correct size.
3. Remove the rubber washer before threading the
faucet connector onto the faucet. If there is between the hose and the adaptor.
5. Attach the quick-sink faucet adaptor to the grey end of the inlet hose making sure the pre‑installed flat washer is any leaking...
User Manual - Page 18
... Instructions" section.
16 7. Using 2 cable ties, fasten the water inlet hose to the drain hose so that water faucet is turned on. 3. Plug the washer into a grounded 3 prong outlet. 2. D ispose of/recycle all packaging materials. 4. Run a normal wash cycle using detergent to the water faucet.
Water Inlet Hose
STEP 8 - COMPLETE INSTALLATION
1. Check that the hoses...
User Manual - Page 19
... using the Setting button -
Quick Wash - CYCLE PROGRESS INDICATORS • When the washer is st powered on, the Cycle Progress lights indicate the
stages of each cycle will turn
17 CONTROL PANEL AND FEATURES
CONTROL PANEL
HIGH MEDIUM
LOW
WATER LEVEL
CYCLE
HEAVY
QUICK WASH
NORMAL
WASH
STATUS RINSE
START PAUSE
SPIN...
User Manual - Page 20
...for each cycle.
*Heavy Duty cycle has a default water level of clothes being washed and other variables such as supply line water pressure.
18 CYCLE Normal
PRESS WASH CYCLE BUTTON
0
...
Spin Only
6
Clean soaking wet garments
Spin
:06
n/a
• Estimated Time is turned on the washer. NOTE: After starting the wash cycle, you must pause the operating cycle to pause an operating cycle...
User Manual - Page 21
... the size of the load, the soil level of the clothes, and the softness of the water being supplied to the washer.
• If you select the Quick Wash cycle, it is recommended that you use a liquid
laundry detergent to mix with a small amount of the wash basket or clogging the drain pump...
User Manual - Page 22
... diluted liquid chlorine bleach to the wash basket water before adding laundry. 1. Start wash cycle and allow the wash basket to spill undiluted bleach onto the washer cabinet or your clothes. LOAD THE WASHER
1. Open the washer lid. Overloading may damage clothes.
Load laundry evenly and loosely in warm water and pour the solution directly into the...
User Manual - Page 23
... fall below
freezing; Ignoring this warning may dissolve, damage, or discolor the washer.
• After washing clothes, leave the lid open so that moisture inside the machine
can evaporate and to
your home if a water hose ruptures or leaks.
• Unplug the washer from the electrical outlet. • Dry the wash basket. • Leave the...
User Manual - Page 24
... drain hose is properly connected to make sure that the water faucet is fully turned on. • Check the water hose to the washer. • Check the position of the drain hose. Water leaks:
• Check that the inlet hose connection at the faucet and washer are tight. • Check that the drain hose connection at...
User Manual - Page 25
..., fasten belts, and
close zippers, metal snaps or hook fasteners before loading clothes. Check that all 4 leveling feet are using
the dispenser and still notice stains, try using diluted bleach.
• Excessive wear and tear - Stop the washer and remove part of improper sorting, overloading or washing at the
wrong water temperature.
•...
User Manual - Page 26
... on how long an implied warranty lasts, so the above limitations may not apply to replace said part as identified in materials or workmanship.
This warranty does not cover incidental or ...defect in the owner's manual. The name and address of the problem.
Damage to hold water.
Damage resulting from the original retail purchase date, Haier will provide the outer washtub and ...
Similar Questions
I Have An Hlp21n When Time To Drain Does Not Drain
I have an hlp21n when time to drain WONT DRAIN SOMETIMES pump does not kick in but if I lower the ho...
I have an hlp21n when time to drain WONT DRAIN SOMETIMES pump does not kick in but if I lower the ho...
(Posted by kenasun01 2 years ago)
My Washer Is Leaking From Hose Connection From Sink, ,
(Posted by Jewel62761 3 years ago)
Haier Hlp21n Washer
Haier HLP21N washer fills and drains but won't agitate or spin. Any suggestions?
Haier HLP21N washer fills and drains but won't agitate or spin. Any suggestions?
(Posted by vidyamahadeo 8 years ago)
Haier Xqj100-96la / Laundry Washers
please do you have ... Agitaior.... Tks
please do you have ... Agitaior.... Tks
(Posted by Jaccarini 10 years ago)
Where Can I Buy A Replacement Belt For My Machine?
the numbers on the belt are 0-408e, vc021138, 0712/02, 42
the numbers on the belt are 0-408e, vc021138, 0712/02, 42
(Posted by gryvss 13 years ago)