GE RM24970 Support Question
GE RM24970 Support Question
Find answers below for this question about GE RM24970 - Remote Control For Home Theater.Need a GE RM24970 manual? We have 1 online manual for this item!
Question posted by katyarodriguezm on September 11th, 2019
Codes For Remore Rm24970
I Will Like to know the code for a daewoo TV Please Universal remite ge rm24970
Current Answers
Answer #1: Posted by Odin on September 11th, 2019 4:47 PM
Odin
Member since:
April 10th, 2010 Points: 41,236,700
Member since:
April 10th, 2010 Points: 41,236,700
It depends on the GE "code list version." The page at https://byjasco.com/support/ge-universal-remote-codes will walk you through.
Hope this is useful. Please don't forget to click the Accept This Answer button if you do accept it. My aim is to provide reliable helpful answers, not just a lot of them. See https://www.helpowl.com/profile/Odin.
Related GE RM24970 Manual Pages
Instruction Manual - Page 1
RM24970
Universal Remote Instruction Manual
Instruction Manual - Page 2
... of TV, VCR, DVD, CBL, and SAT. For example, the CHAN and VOL buttons might be controlled by this remote.
Table of Contents
Introduction 3 Setup 3
Battery Installation 3 Battery Saver 3 Code Saver 3 Code Setup 3 Button Functions 4 Audio Functions 6 AM/FM Tuner and Home Theater Functions..... 7 Surround Sound Feature 8 Direct Code Entry 9 Code Search 10 Using Your Remote 11 Code...
Instruction Manual - Page 3
... case, then insert 2 AAA Alkaline batteries.
3.
You can either setup the remote using the code search feature to learn how to search through the library of code under the TV button.
NOTE: You can store a VCR code under the CBL button, or a Cable code under the DVD button, etc. I.E.
However, do not press any mode (except...
Instruction Manual - Page 4
...
CODE SEARCH For setup.
0-9 Enter numbers for the PREV.CH button to operate this remote can only operate features that are referred to by different names on the device you are controlling....input of the product, normally the TV. TV, VCR, etc. MUTE Turns off the TV sound while the picture remains.
Button Functions
Some buttons on the remote might have PREV.CH ability for direct...
Instruction Manual - Page 5
... Mode.
DISP Display button shows date and time if your VCR even when the remote is set to normal viewing. PREV.CH Returns to record from your original
remotes. RECORD, PLAY, STOP, REW, FF, PAUSE VCR control buttons operate your TV or VCR has
that feature. ON•OFF Turns product On or Off...
Instruction Manual - Page 6
...•OFF Enables the receiver's Digital Sound Processing mode. CD, TAPE, TUNER, TV, VIDEO Used to directly select the device you toggle through the various DSP modes.... the TEST button. LEVEL+/LEVEL- MODE Toggles the surround modes on the Receiver or Mini-System Point the remote control at the receiver and press the AUDIO button. In some cases you select the AM/FM band on your...
Instruction Manual - Page 7
..., TAPE, TUNER, TV, or VIDEO). Press the AM/FM button to control volume. Turn the TV on CD Players.
buttons to toggle between AM
and FM. 4. Press the TUNER (3) button. 3. Home Theater Systems
With GE receivers, a second press of the TV button turns the receiver... Press the VOL+ or VOL- If this presents a problem, it may operate both the TV and the receiver volume at the same time.
Instruction Manual - Page 9
... operate your equipment, try one of the other codes for easy reference later. Direct Code Entry
1.
For an invalid code, the red indicator flashes.
4. Enter the 4 digit code from the code tables (on , then release the CODE SEARCH button.
2. Type TV DVD VCR SAT CBL AUX AUDIO
Type stored Code TV
With your brand. The red indicator blinks, then...
Instruction Manual - Page 10
... button until the red indicator stays on the device (TV, VCR, etc.) to be a code that "works" with each button press.
5. The
red indicator blinks off with your device may be controlled turns off. The red indicator blinks off once. 4. There may only allow limited functionality (e.g. Press the ON•OFF button
repeatedly...
Instruction Manual - Page 11
... in turn. Press and hold the CODE SEARCH button until the red indicator stays on. For example, if you to identify the four digit library code stored under the device button pressed in step 2, press each numeric button from 0-9 in your code.
5. Using Your Remote
Code Identification
The Code Identification Feature allows you want to find...
Instruction Manual - Page 12
...
blink off to turn off your TV does not have a sleep feature. 1. Leave the Remote pointing towards the TV
with an unobstructed path. This feature works even if your TV after a period of 1 to set . 6.
The remote must be in TV mode to 99 minutes as shown below. onds). 3. Using Your Remote, cont. ton. 2. Press and release...
Instruction Manual - Page 13
... a separate code (under any Mode programmed with Separate Power On and Off Buttons
Some GE, RCA and ProScan models require you used. For example, if you have a TV/ DVD Combo, you to set up two different Mode buttons to control both parts of the Combo device. a TV Combo, SAT/PVR, etc.
13 Using Your Remote, cont...
Instruction Manual - Page 14
... red indicator turns off , then
release the button. 3.
Setting ALL Volume/Mute Control to any one Mode
This routine can set for Volume/Mute button control without needing to change to TV Mode. If the programmed code has no Volume/Mute control. The red indicator will do nothing. Setting any one chosen Mode for all...
Instruction Manual - Page 15
... (TV, VCR, etc.), the red
indicator blinks then stays on , then release the 2. Using Your Remote, cont. Volume/Mute Control
This routine can set any Mode to use its own Volume/Mute control. If...Volume/Mute buttons will now use only its own Volume/Mute control.
15 Your chosen Mode will do nothing. 1. Press and hold the CODE SEARCH button
ubnutitlotnh.e red indicator turns on . 4. Press ...
Instruction Manual - Page 16
... the device button of the product you want to control.
• Program the remote with a new code. • Install new batteries. (You might have to
reprogram your remote after you can find available on which , should write the codes for future reference. Try programing remote with a new code.
• Remote may not be different than your product.
Apply...
Instruction Manual - Page 18
RM24970
Universal Remote Instruction Manual
Jasco Products Company 311 N.W. 122nd Oklahoma City, OK 73114
Made in China
RM24970-
Similar Questions
Program Remote Control
(Posted by droopdi22le1979 10 years ago)
What Are The Codes For A Toshiba Tv Using A Ge Universal Remote 24914
(Posted by madmoegirl 11 years ago)
How Do I Program A Ge Universal Remote If I Can't Find The Code?
This is a previously owned Phillips Magnavox TV (older model) that came with a GE Universal Remote.�...
This is a previously owned Phillips Magnavox TV (older model) that came with a GE Universal Remote.�...
(Posted by handyhelper 11 years ago)
I Need The 4 Digit Code For A Wansa Tv Using A Ge 24993 Universal Control Remote
(Posted by juanluis2211 13 years ago)
How Can I Find The Codes To Use With This Remote? So I Can Program My Tv.
(Posted by lcomae 13 years ago)