Craftsman 28922 Support Question
Craftsman 28922 Support Question
Find answers below for this question about Craftsman 28922 - YT 3000 21 HP 42" Yard Tractor.Need a Craftsman 28922 manual? We have 1 online manual for this item!
Question posted by ssgwmwhinnery on March 16th, 2013
How Do I Shorten The Cable That Engages The Mower Blades 42 Inch Craftsman 9000
How do I shorten cable that engages the mower deck
Current Answers
Related Craftsman 28922 Manual Pages
Operation Manual - Page 1
Operator's Manual
1®
LAW TRACTO
21.0 HR* 42" Mower Electric Start Automatic Transmission
Model No. 917.28922
• EspaSol, p. 33
03070
This product has a low emission engine which operates differently from previously built engines.
Sat
SEARS, ROEBUCKAND CO., HOFFMAN ESTATES, IL 60179 U.S.A. Visit our Craftsman website:www.sears.com/craftsman
*As rated by the engine ...
Operation Manual - Page 2
...21
Storage
27
Troubleshooting
28
Sears Service Back Cover
Craftsman Riding Equipment Warranty: Lawn Tractors, Garden Tractors, Zero Turn Riders
CRAFTSMAN... amount of engine oil, failure to keep the deck clear of the riding equipment, impacting objects that it... used within the warranty period, including but not limited to blades, spark plugs, air cleaners, belts, and oil filters. ...
Operation Manual - Page 3
...operating or storing the machine.
Always look down a hill in a large percentage of riding mower-related injuries. Avoid discharging material against a wall or obstruction. tended. dation for wheel ...under the machine. Shut off blades, set parking brake, stop before turning. • Never leave a running machine unat- Material may lose control of the tractor.
_IbWARNING: Tow only the...
Operation Manual - Page 5
... a closed area.
• Keep all times until fueling is not possible, then refuel such equipment with manufacturer's recommended parts,
when necessary.
• Mower blades are sharp. bris. Wrap the blade
or wear gloves, and use a nozzle lock-open device. • Iffuel is clear of grass, leaves, or
other than from the truck or...
Operation Manual - Page 6
...California Public Resources Code).
Always observe the "SAFETY RULES".
Your new Craftsman® product is available through your tractor. • Follow the instructions under "Mainte- That's a Repair Protection... Oil Type API-SG-SL): Oil Capacity:
Spark Plug:
Ground Speed
Charging System:
Battery:
Blade Bolt Torque:
2.50 Gallons Unleaded Regular
SAE 30 (above is required by our 12,000 ...
Operation Manual - Page 8
... tractor is important for best cutting results. (Tires must be properly inflatedfor leveling).
/ Check mower and drive belts. TO ROLL TRACTOR OFF SKID (See
Operation section for replacing motion and mower blade ...holding the deflector shield up against tractor. CHECK TIRE PRESSURE
The tires on
tires.
CHECK DECK LEVELNESS
For best cutting results, mower housing should be sure freewheel control...
Operation Manual - Page 9
...situation that could result in serious injury or death. These symbols may appear on your tractor or in death, serious injury and/or property damage. R NH L
REVERSE
NEUTRAL
...E21 { j.,
BRAKE
MOWER HEIGHT
MOWER LIFT
LIGHTS ON
FUEL
BATTERY
REVERSE
FORWARD
CRUISE CONTROL
CLUTCH/BRAKE PEDAL
®@®@@
ATTACHMENT CLUTCH DISENGAGED
ATTACHMENT CLUTCH ENGAGED
DANGER, KEEP HANDS AND...
Operation Manual - Page 10
...
Used for starting and controlling engine speed.
(E) ATTACH M ENT CLUTCH LEVER =Used to engage the mower blades, or other powered attachment while in reverse.
(H) LIGHT SWITCH - ments mounted to your tractor.
(F) IGNITION SWITCH - Allows operation
of
03078
Our tractors conform to your tractor.
(B) CLUTCH/BRAKE
PEDAL -Used for future reference. Turns the headlights on and off...
Operation Manual - Page 11
... operator to disengaged position
(t_ a)Attachment
(t'_)
Clutch
Engage Position
Disengaged Position
GROUND DRIVE-
.
NOTE: U nder certain conditions when tractor
is equipped with the engine running , any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage.
To stop mower blades, move throttle control between half and
full...
Operation Manual - Page 12
...; The average lawn should be mowed twice. Gauge wheels then keep the deck in proper position to over 6 inches in this section of the attachment lift lever (A) determines the cutting height.
tion, gauge wheels should be cut relatively high;
the second to
desired position.
TO OPERATE MOWER
Your tractor is approximately 1" to the blade tip with...
Operation Manual - Page 15
... freewheel contro! f }1
(
t,
,J
• If grass is recommended that clippings will plug mower and leave undesirable clumps. Sitting in neutral position, slowly disengage clutch/brake pedal. 8. With motion control lever in the tractor seat, start engine. PURGE TRANSMISSION
A
_CAUTION:
Never engage or disengage
freewheel lever while the engine is running , move throttle control to...
Operation Manual - Page 16
... will shorten the life of this manual.
• At least once a year you feel they must maintain tractor as instructed in this tractor does not cover items that will need to see if you should replace the spark plug, clean or replace air filter, and check blades and belts for Loose Fasteners
t# #
C ChecWReplace Mower Blades T Lubrication...
Operation Manual - Page 17
... best results mower blades must be purchased from your
tractor. BLADE REMOVAL
1. BRAKE OPERATION
If tractor requires more than five (5) feet to drive in highest gear on
mandrel assembly.
4. CHECK REVERSE SYSTEM
OPERATION
(ROS)
• When the engine is running with the ignition switch in the engine "ON" position and the attachment clutch engaged, any attempt...
Operation Manual - Page 20
... off . DECK WASHOUT PORT
Your tractor's deck is equipped with a washout port on its deck wash system. Thread the nozzle adapter (packaged with your garden hose.
4. Engage the mower deck PTO to ...tractor to a level, clear spot on your lawn, near enough to a water spigot for your house, garage, parked cars, etc. Make sure the PTO (Blade Engage) is clear.
7.
IMPORTANT: Make certain the tractor...
Operation Manual - Page 21
...: After rear lift links are pointing forward before sliding mower under tractor until it slowly and engage in lowest position. Slide mower out from tractor and hook the clutch spring (Q) into the cable guide on the tractor, remove the front link (E) and rear lift liks (C) from under tractor.
%
03042tex
21
Roll belt off and push housing guide (P) out of...
Operation Manual - Page 23
...lawn appears unevenly cut, determine which side of mower is pointing straight forward. VISUAL SIDE-TO-SIDE ADJUSTMENT
1. With all tires properly inflated, park tractor
on tires.
To obtain the best cutting results, the mower blades should bethesameon both sides of mower, position blade... than the rear tip when the mower is not adjusted properly. Deck must be adjusted so the front ...
Operation Manual - Page 24
... down and engage parking brake.
2. Install belt through stationary idler (A) and clutching idler (B). 6. Remove beltfrom stationary idler (A) and
clutching idler (B). 3. ber is a
TO CHECK BRAKE
If tractor requires more than five (5) feet to front, factory set at highest speed in highest gear on centerspan idler (C). 5. TO REPLACE MOWER BLADE DRIVE BELT
The mower blade drive belt...
Operation Manual - Page 25
...
BLACK cable first from chassis and then
from batteries.
Loosen the adjustment bolt. 2. Movethe motion control lever 1/4 to 1/2
inch in the MAINTENANCE section of this procedure: IMPORTANT: Your tractor is...square key. 4. NOTE: To seal tire punctures and prevent flat tires due to mower deck
Before connecting battery, remove metal bracelets, wristwatch bands, rings, etc. Retaining Rin(...
Operation Manual - Page 29
...Excessive vibration 1 Worn, bent or loose blade.
2 Bent blade mandrel.
3 Loose/damaged part(s). Replace... center.
3 Tighten loose part(s).
Tighten blade bolt 2 Contact a Sears or other
29... service center.
1 Replace blade.
Engine continues to Sears service...Build-up of grass, leaves and
trash under mower.
4 Dirty air filter. 5 Low oil ...15 Engine valves out of mower
housing.
4 Clean/replace...
Operation Manual - Page 30
...and connections. 5 Replace fuse.
1 Bad battery cell(s). 2 Poor cable connections.
1 Replace battery. 2 Check/clean all connections.
3 Faulty regulator (if so equipped).
3 Replace regulator.
4 Faulty alternator.
4 Replace alternator.
30 Tighten blade bolt.
7 Buildup of grass, leaves and trash under mower.
4 Bent blade mandrel.
5 Clogged mower deck vent from buildup of grass, leaves, and...
Similar Questions
How To Change The Cable To Engage The Blades For A Yts 3000
(Posted by biyegdr 9 years ago)
How To Shorten Cable Mower Deck Craftsman 9000
(Posted by naramatta 9 years ago)
How To Change The Blades On A Craftsman Yt 3000
(Posted by omega24ej 10 years ago)
Craftsman Riding Lawn Mower Yt 3000 21 Hp 46 Deck Blades Will Not Engage
(Posted by viKgbv 10 years ago)
Pto Does Not Engage Mower Deck
PTO does not engage mower deck, loose lever but movement obvious at the deck when pushed up to engag...
PTO does not engage mower deck, loose lever but movement obvious at the deck when pushed up to engag...
(Posted by genefields 13 years ago)