Craftsman 28922 Support Question
Craftsman 28922 Support Question
Find answers below for this question about Craftsman 28922 - YT 3000 21 HP 42" Yard Tractor.Need a Craftsman 28922 manual? We have 1 online manual for this item!
Question posted by kwmjalo on June 3rd, 2014
How To Maintane The Craftsman Yt 3000
The person who posted this question about this Craftsman product did not include a detailed explanation. Please use the "Request More Information" button to the right if more details would help you to answer this question.
Current Answers
Related Craftsman 28922 Manual Pages
Operation Manual - Page 1
..., read and understand this Owner's Manual.
Operator's Manual
1®
LAW TRACTO
21.0 HR* 42" Mower Electric Start Automatic Transmission
Model No. 917.28922
• EspaSol, p. 33
03070
This product has a low emission engine which operates differently from previously built engines. Visit our Craftsman website:www.sears.com/craftsman
*As rated by the engine manufacturer
424690 Rev. 3
Operation Manual - Page 2
... Rules
3
Product Specifications 6
Assembly/Pre-Operation
7
Operation
9
Maintenance Schedule 16
Maintenance
16
Service and Adjustments 21
Storage
27
Troubleshooting
28
Sears Service Back Cover
Craftsman Riding Equipment Warranty: Lawn Tractors, Garden Tractors, Zero Turn Riders
CRAFTSMAN TWO YEAR FULL WARRANTY
FOR TWO YEARS from the date of purchase, if any non...
Operation Manual - Page 3
... backing.
• Never direct discharged materialtoward anyone. Material may lose control of the tractor.
_IbWARNING: Tow only the attachments that operators, age 60 years and above, are ....
• Never carry passengers. • Do not mow in a large percentage of riding mower-related injuries.
Tires can touch hot exhaust / engine parts and burn. I. Avoid discharging material ...
Operation Manual - Page 5
... will not have been given rides in the past may fall off and be seriously injured or interfere with manufacturer's recommended parts,
when necessary.
• Mower blades are sharp. Do not use extra caution
when servicing them.
• Check brake operation frequently. Clean oil or fuel
spillage and remove any adjustments...
Operation Manual - Page 6
...that it may have similar laws. Some limitations and exclusions apply.
Your new Craftsman® product is all covered repairs.
• Product replacement if your Repair...
Protection Agreement today!
A spark arrester for parts
and labor on your purchase of your tractor properly.
Lbs. The
instructions will enable you purchase the Agreement,
a
simple phone call ...
Operation Manual - Page 7
...year indicated on all accessible loose parts and parts boxes from carton.
2. TO REMOVE CARTON
TRACTOR
FROM
UNPACK CARTON
1.
Remove all four panels
of this manual, itmeans when you are in... panels flat. 3. Keys
(2) Keys
(1) Oil Drain Tube For Future Use
Slope Sheet
Your new tractor has been assembled unassembled for any additional loose parts or cartons and remove.
1. NOTE: If this...
Operation Manual - Page 8
... is at proper level.
/ Fuel tank is important for best cutting results. (Tires must be properly inflatedfor leveling).
/ Check mower and drive belts. Remove banding holding the deflector shield up against tractor. CHECK FOR PROPER POSITION OF
ALL BELTS
See the figures that the brake is adjusted comfortably and tightened securely.
/All...
Operation Manual - Page 9
... result in death or serious injury. These symbols may appear on your tractor or in damage to the tractor and/or engine. CAUTION indicates a hazard which , if not avoided...OFF
_D
REVERSE OPERATION
SYSTEM (ROS)
ENGINE ON ENGINE START
PARKING
_ E21 { j.,
BRAKE
MOWER HEIGHT
MOWER LIFT
LIGHTS ON
FUEL
BATTERY
REVERSE
FORWARD
CRUISE CONTROL
CLUTCH/BRAKE PEDAL
®@®@@
ATTACHMENT ...
Operation Manual - Page 10
... other powered attachment while in reverse.
(H) LIGHT SWITCH -
Used
for pushing or slowly towing
the tractor with the engine off .
(J) MOTION CONTROL LEVER -Selects the speed and direction of tractor.
(M) FREEWHEELCONTROL- Used to the applicable safety standards of mower or other attach- Disengages
transmission for starting the engine.
(C) PARKING BRAKE-
Used for future...
Operation Manual - Page 11
.... Pedal should remain in severe eye damage. To eliminate this possibility, always stop tractor com- Always wear safety glasses or eye shields while operating your tractor or performing any attempt bythe operator to discharge and go dead. To stop mower blades, move attachment
clutch clutch lever to move throttle control between half and...
Operation Manual - Page 12
...inches in height should be mowed twice.
Start tractor with tractor on a flat level surface.
1. Release parking brake. 3.
TO OPERATE MOWER
Your tractor is approximately 1" to 4". Any attempt by the.... • The average lawn should be cut relatively high;
Adjust mower to help prevent scalping in place.
12 For healthier and better looking lawns, mow often and after ...
Operation Manual - Page 13
... mowing is closed and secured to engine
"ON" position.
TO TRANSPORT When pushing or towing your tractor on a slope, is necessary to allow reverse operation with slopes greater than two (2) MPH. &#...ON HILLS
Ai_,WARNING:
Do not drive up with specifications of the manufacturer of your tractor. OPERATION
Only use ofthe ROS is no children or other
bystanders will shut off the...
Operation Manual - Page 14
...(see "TO ADJUST CARBURETOR" in storage. Be sure freewheel control is on seat in your tractor has been shipped, from several seconds
to several attempts, move fuel from the tank to bottom...temperatures (below )
STARTING
(50 ° F and
7.
NOTE: If at a high altitude (above 3000 feet) or in the fuel tank
or permanent damage may need to the fast position. When engine ...
Operation Manual - Page 15
... lever to reverse position. MOWING TiPS
o Tire chains cannot be properly leveled for the first time. o Mower should be
purged before operating the tractor. 1. See "TO LEVEL MOWER HOUSING" in the tractor seat, start engine. the second to tractor. Wet grass will discharge away from dried clippings. This will suit the terrain and give the...
Operation Manual - Page 16
...Check for Loose Fasteners
t# #
C ChecWReplace Mower Blades T Lubrication Chart
0 Check Battery Level R Clean Battery and Terminals
Check Transaxle Cooling Check Mower Levelness
Check V-Belts Check Engine Oil Level...A
new spark plug and clean air filter ensure proper air-fuel mixture and help your tractor.
Check for proper operation.
5. EVERY 25
HOURS
EVERY 50
HOURS
EVERY 100
HOURS
EVERY...
Operation Manual - Page 17
... tires due to drive in reverse should
shut off the engine. BLADE CARE
For best results mower blades must be serviced. (See "TO CHECK BRAKE" in the disen- Remove blade bolt by the operator to blades.
TRACTOR
Always observe safety rules when performing any attempt by the operator to slow leaks, tire...
Operation Manual - Page 18
... of operation. All oil must meet API service classification SG-SL • Be sure tractor is in increased oil consumption
periodic charging of the battery with an automotive charger will drain.... • Keep small vent holes open. • Recharge at least once a year if the tractor is maintenance free.
The belts are intact and clean.
• Inspect cooling fins for dirt, grass...
Operation Manual - Page 19
... from base.
4. Use compressed air or a leaf blower to be used more often under dusty conditions.
1. Carefully remove air filter cartridge and pre-cleaner from tractor and mower.
19
Place new fuel filter in position in engine or transmission will not run properly using a garden hose or pressure washer to clean your...
Operation Manual - Page 20
...sPTO(BladeEngage) to lock the adapter on the tractor, re-start the engine and place the throttle lever in mower with the cutting deck engaged until the deck ...tractor's
discharge chute is directed AWAY from the nozzle washout port.
20 Pull back the lock collar of the nozzle adapter and push the adapter onto the deck washout port at the left end of the mower deck. Turn the water on your lawn...
Operation Manual - Page 21
... PERFORMING ANY
1. Al_ CAUTION: After rear lift links are pointing forward before sliding mower under right side of bracket.
5. Slide mower under tractor.
%
03042tex
21 Go to "STOP" and remove key. 5.
Roll belt off and push housing guide (P) out of tractor.
nected, the attachment lift lever will be mounted on level surface and engage parking...
Similar Questions
Parts Manual
I am looking for a parts manual! Can I get some help? I bought this tractor off someone that didn't ...
I am looking for a parts manual! Can I get some help? I bought this tractor off someone that didn't ...
(Posted by Rjackers 1 year ago)
Yt 3000 21 Hp Yard Tractor By Craftsman How To Clean The Carburetor
(Posted by jobyproo 9 years ago)
Craftsman Riding Lawn Mower Yt 3000 21 Hp 46 Deck Blades Will Not Engage
(Posted by viKgbv 10 years ago)
Craftsman Yt 3000 Yard Tractor Deck Wont Engage
(Posted by JoilPho 10 years ago)
Has Anyone Reinstalled The Mower Onto The Craftsman 24 Hp 42' Mower After A Plow
I installed the plow onto my Craftsman 24HP 42" mower for the winter months. Now that I am reinstall...
I installed the plow onto my Craftsman 24HP 42" mower for the winter months. Now that I am reinstall...
(Posted by dasehome 11 years ago)