Bernina Bernette 92C Support Question
Bernina Bernette 92C Support Question
Find answers below for this question about Bernina Bernette 92C.Need a Bernina Bernette 92C manual? We have 1 online manual for this item!
Question posted by mitch303032 on January 17th, 2016
Buttonhole Foot 'n'
I purchased a Bernina Bernette 92C and in with the feet was a Buttonhole foot marked "N". Low shank attachment with black "box" above shank and room in the back to place button. Does this work with the Bernette 92C or does it belong to another sewing machine.
Current Answers
Answer #1: Posted by TechSupport101 on January 21st, 2016 3:40 PM
TechSupport101
Member since:
May 24th, 2013 Points: 12,171,315
Member since:
May 24th, 2013 Points: 12,171,315
Hi. Please refer to pages 16 & 17 of the Operation Manual here https://www.helpowl.com/manuals/Bernina/Bernette92C/118054 to better understand this
Related Bernina Bernette 92C Manual Pages
Operation Manual - Page 2
... current BERNINA and bernette sewing machines. Table of Contents
Introduction ...3 Sewing Machine Needles 4 Thread ...6 Presser Feet ...7 Securing Stitches...8 Turning Corners...9 Zigzag Stitch...10 Blind Hem ...11 Triple Straight Stitch 12 Vari-Overlock Stitch...13 Stretch Stitch ...14 Gathering Over Cord 15 Buttonholes ...16 Manual Buttonholes...17 Automatic Buttonholes 18 Attaching Buttons...
Operation Manual - Page 3
... a "Sew How" box. www.berninausa.com www.bernina8series.com www.berninamylabel.com www.sewingrepublic.com www.berninaUSAblog.com www.throughtheneedle.com
12/13/10
For more ! After all BERNINA and bernette models. Pages 23-25 of stitchers: quilters, garment makers, embroiderers, crafters, virtual stitchers, fiber artists and more ideas and information about using your machine, attach...
Operation Manual - Page 4
assures proper stitch formation; Parts of a Needle
Shank (flat side to a bent, damaged, or incorrect size or type needle. medium-weight 90 - Domestic
60 ...system - 130/705H
Needle point - avoids fabric damage
Needle size - The needle is the most inexpensive part in your sewing machine but it isn't protected by the hook point
Bent - European vs.
Shaft
4 the thread can't stay in the ...
Operation Manual - Page 5
... and heirloom work . Made of the fabric. Suitable for manufactured fibers such as hemstitching.
100
One Universal needle and one shank. Used for use with large eye and groove;
Sometimes used on each side. Sharp point; Not for sweatshirt fleece. A compromise between a Sharp and a Ballpoint;
Available in knits and elastic. Sewing Machine Needles
Type...
Operation Manual - Page 6
..., 50-wt. Guidelines for French heirloom stitching, delicate machine embroidery, piecing and darning. excellent for decorative work only. Mettler 30/2; excellent for a soft, shiny ...a sewing machine needs three things: correct thread, correct size needle, and properly adjusted thread tensions.
Inferior thread results in machine embroidery, appliqué, and buttonholes. ...
Operation Manual - Page 8
... the features of your model. Place it under the presser foot and align one 6" edge with the ⅝" guide line.
The machine will sew in reverse until the Quick Reverse Button/Lever is released.
Do you know how to: ▪ Select straight stitch? ▪ Sew in the same way.
the machine will automatically secure the stitching, then...
Operation Manual - Page 9
Briefly push the button and needle will stop with the needle up position (default). Machine will go up .
12/13/10
Do you know how to: ▪ Use the Free Hand System? ▪ Use the Stitch Plate markings? ▪ Engage the Needle Stop Down feature?
9 Place the fabric under the foot and engage the Needle Stop...
Operation Manual - Page 10
... Firm woven fabric, 4" x 6" Needle: 80/12 Universal Needle Position: As directed in instructions BERNINA Presser Foot: Reverse Pattern Foot #1/1C/1D bernette Presser Foot: Zigzag/Universal Foot
Select the Zigzag Stitch (width = 4, length = 2). Guide the edge of the fabric under the...fabric on one 6" edge using the inside edge of the presser foot -
sew using the following steps.
Operation Manual - Page 11
... a 2" hem to the machine.
Baste the hem in place, sewing about ¼" from the ...BERNINA Presser Foot: Reverse Pattern Foot #1/1C/1D and
Blind Hem Foot #5 bernette Presser Foot: Zigzag/Universal Foot and
Blind Hem Foot (optional accessory)
Attach Reverse Pattern Foot #1 or bernette Zigzag/Universal Foot to : ▪Machine baste? ▪Distinguish between Blind Hem Foot #5 and Edgestitch Foot...
Operation Manual - Page 12
... in instructions BERNINA Presser Foot: Reverse pattern Foot #1/1C/1D and
Edgestitch Foot #10/10C/10D (optional accessory) bernette Presser Foot: Zigzag/Universal Foot
Attach Reverse Pattern Foot #1/1C/1D or bernette Zigzag/ Universal Foot to the far right.
Sew the seam and press it open.
Change to Edgestitch Foot #10/10C/10D and adjust the needle position to the machine.
Select the...
Operation Manual - Page 14
... of the fabric on the ⅝" marking on the fabric and eliminate the stretching. Place the fabric pieces right sides together.
Fabric: Spandex, two pieces, 2" x 6" each Needle: 80/12 Universal (Ballpoint may also be used) Needle Position: As programmed BERNINA Presser Foot: Reverse pattern Foot #1/1C/1D bernette Presser Foot: Zigzag/Universal Foot
Select the Super Stretch stitch.
Operation Manual - Page 15
... it won't be able to the machine.
Gathering Over a Cord
Fabric: Medium weight cotton, 12" x 4" and Narrow cord such as perle cotton or embroidery floss, 18"
Needle: 80/12 Universal Needle Position: Center BERNINA Presser Foot: Clear Embroidery Foot #39/39C/39D bernette Presser Foot: Cording Foot (optional accessory)
Attach the desired foot to move
through the channel formed...
Operation Manual - Page 16
... medium weight fabrics. Buttonhole Presser Feet
Standard Buttonhole Foot #3 for manual buttonholes
on CB models
Standard Buttonhole Foot #3C for manual buttonholes on rotary models
Automatic Buttonhole Foot #3A for manual buttonholes
4-Step Buttonhole Foot For the bernette model 56.
12/13/10
Automatic Buttonhole Foot For bernette models 66 and 92c.
16 HEIRLOOM BUTTONHOLE: Fine to medium...
Operation Manual - Page 17
....), 18"
Needle: 80/12 Universal Needle Position: As programmed BERNINA Presser Foot: Standard Buttonhole Foot #3/3C bernette Presser Foot: Models 46 & 56 only: 4-step Buttonhole Foot
Note: For making buttonholes with remaining steps.
The best way to achieve this:
• CB Hook Machines: Thread the bobbin thread through the hole in half to : ▪ Measure a button for embroidery.
Operation Manual - Page 18
...
BERNINA Presser Foot: Automatic Buttonhole Foot #3A
bernette Presser Foot: Automatic Buttonhole Foot
Note: Models 1008 & activa 210 do not make a corded Automatic Buttonhole on bernette models 66 and 92C, follow the directions on the second line. Automatic Buttonhole-BERNINA ▪ Attach Automatic Buttonhole Foot #3A; This buttonhole is finished. Automatic Buttonhole-bernette 66 and 92c...
Operation Manual - Page 19
...the machine. Note: A short shank is complete; To avoid breaking the needle, adjust the stitch width if necessary so that the left and right swings of the button.
Attaching Buttons
Fabric: Firm woven fabric, 4" x 8" and Lightweight tear-away stabilizer, 4" x 4"
Needle: 80/12 Universal BERNINA Presser Foot: Button Sew-On Foot #18 (optional) bernette Presser Foot: Button Sew-On Foot (optional...
Operation Manual - Page 20
... BERNINA Presser Foot: Reverse Pattern Foot #1/1C/1D and
Zipper Feet #4 and Zipper Foot with Guide #14 bernette Presser Foot: Zigzag/Universal foot and Zipper Foot
Attaching the Zipper to Garment Place fabric pieces right sides together. adjust the needle position (bernette users slide the zipper foot) to the right or left side of the zipper. move the needle position to : ▪ Machine...
Operation Manual - Page 21
...Button Sew-On
60
60 60 60 60
60
Quilter's Securing
1324 1324 324 324 324
324
Securing
5
5
5
5
5
5
Standard Buttonhole...
24
3
3
3
2
2
2
3 Series
activa classic
bernette
380 350PE 330 210 1008 92c 66 56 46*
23
21
--
--
--
--
-- --...2
2
2
2
3
3 33
* The stitches on bernette model 46 are not numbered on the machine but are used in the order they appear on the front ...
Operation Manual - Page 22
Machine Features & Functions
The following features and functions are used in Workbook 1: Basic Operation.
8 Series
artista
Feature/ Function 830 820 730 640 635LE 630
Automatic OneStep Buttonhole...yes yes
On-screen Buttonhole Measuring
yes
yes yes yes yes
yes
Presser Foot Pressure
yes yes yes...yes yes
3 Series
activa mechanical
bernette
380 350PE 330 210
1008 92c 66 56 46
yes yes yes...
Operation Manual - Page 23
...Darning Foot #9
--
--
--
9
--
9
Button Sew-On Foot #18
18
-- 18 --
--
-- Walking Foot #50
--
--
-- --
--
--
X
--
--
--
--
--
I
I
5
5
5
5
5
X
8
--
8
--
--
--
--
--
--
--
-- If the bernette foot does not have snap-on soles. Presser Feet
Reverse Pattern Foot #1/1C/1D
Overlock Foot #2/2A Standard Buttonhole Foot #3/3C Auto Buttonhole Foot #3A
Zipper Foot...
Similar Questions
How Do You Attach The Automatic Buttonhole Foot?
Any instructions I find, say remove then pressed foot (done!) and attach the automatic buttonhole fo...
Any instructions I find, say remove then pressed foot (done!) and attach the automatic buttonhole fo...
(Posted by terryandlyn 7 years ago)
Bernette 66 Sewing Machine
How do I thread a Bernette 66 sewing machine?
How do I thread a Bernette 66 sewing machine?
(Posted by stringpam 8 years ago)
I Was Given 4 Machines To Use In My Classroom, But Can't Find A Bernette 92c Man
I need a manual that includes trouble shooting, how to thread the machine, and basic directions for ...
I need a manual that includes trouble shooting, how to thread the machine, and basic directions for ...
(Posted by kolmstead 8 years ago)
I Need A Owners Manual For A Bernette 92 C Sewing Machine, How To Order?
I recently purchased a Bernette 92 C, from a Bernin dealer, It did not have an owners manual with ...
I recently purchased a Bernette 92 C, from a Bernin dealer, It did not have an owners manual with ...
(Posted by Yaddowp 11 years ago)