Adaptec 29160LP - SCSI Card Storage Controller U160 160 MBps Support and Manuals
Get Help and Manuals for this Adaptec item
View All Support Options Below
Free Adaptec 29160LP manuals!
Problems with Adaptec 29160LP?
Ask a Question
Free Adaptec 29160LP manuals!
Problems with Adaptec 29160LP?
Ask a Question
Adaptec 29160LP Videos
NEU/NOS: PCI Adaptec ASC-29160LP HIGH/IBM-2 PCI-x [10023] - m-ware.de
Duration: :36
Total Views: 41
Duration: :36
Total Views: 41
Popular Adaptec 29160LP Manual Pages
Installation Guide - Page 2
... works in the slower 32-bit mode.
68-pin Internal LVD/SE connector
68-pin External VHDCI LVD/SE connector
This installation guide explains how to:
• Install the Adaptec SCSI Card 29160LP • Set up to 15 SCSI devices-such as hard disk drives, scanners, and CD-ROM drives-to any Intel-based computer with Ultra160 or Ultra2...
Installation Guide - Page 4
... the card or slot may have a 64-bit slot, you use in a 32-bit PCI slot. Save the slot cover screw for use force.
3
STEP 3
Locate an unused 64-bit PCI expansion slot and remove the expansion slot cover. Select an expansion slot that supports Bus Mastering. If your computer manual to install the Adaptec SCSI Card 29160LP.
Installation Guide - Page 5
... to do several things to your devices. When installed properly, the card should appear level with the device for specific instructions. Below are some guidelines for more information on your SCSI devices before you connect to the Adaptec SCSI Card 29160LP User's Reference for setting SCSI IDs and termination on these topics. then replace the slot cover screw.
No two devices can...
Installation Guide - Page 7
... Internal SCSI Devices
Connect internal SCSI devices to review Setting Up SCSI Devices on page 4.
Before connecting devices, be sure to the internal LVD/SE connector. Follow these steps to connect the devices:
NOTE If you connect single-ended SCSI devices along with Ultra160 or Ultra2 SCSI devices, the data transfer speed drops to the Adaptec SCSI Card 29160LP. Internal SCSI device...
Installation Guide - Page 11
... driver software when the operating system is supported by the operating system you are using, read the operating system manual or contact the operating system vendor for information. CAUTION Using a single-ended terminator will cause the SCSI bus to the Ultra160 Family Manager Set User's Guide and Adaptec SCSI Card 29160LP User's Reference for instructions on either installing driver software...
User Reference - Page 7
... the Adaptec SCSI Card 29160LP Installation Guide if you need instructions on the Adaptec SCSI Card 29160LP
The Adaptec SCSI Card 29160LP supports Ultra160 SCSI devices.
Ultra160 is a new generation of SCSI technology that consists of a SCSI adapter card (such as the Adaptec SCSI Card 29160LP) installed in SCSISelect utility if you need to change the Adaptec SCSI Card 29160LP settings.
User Reference - Page 9
...external devices is enabled or disabled by installing or removing a SCSI terminator. I In Windows® 95/98, you do not change this default setting.
3
I By default, termination on devices between the ends of the SCSI bus must be disabled, on the Adaptec SCSI Card 29160LP itself , has a terminator installed (or enabled). Terminating the SCSI Bus
To ensure reliable communication on...
User Reference - Page 10
... properly? I Is the Adaptec SCSI Card 29160LP firmly seated and secured in the Troubleshooting Checklist below. Adaptec SCSI Card 29160LP User's Reference
Troubleshooting
Most problems can be resolved by following the recommendations, continue with PCI Rev. 2.1 or higher,
and does it support Bus Mastering? Troubleshooting Checklist
Most problems with a specific SCSI device when other...
User Reference - Page 11
... down the system, remove the Adaptec SCSI Card 29160LP, and restart the computer. 6 Verify that I get the system to the desktop, the core software is functional; Troubleshooting
Troubleshooting in Safe Mode.)
5 How can I can verify that the SCSI card is functioning normally?
1 Start or restart your computer. 2 (For Windows 95:) When the message "Starting Windows 95"
appears, press and release...
User Reference - Page 12
Adaptec SCSI Card 29160LP User's Reference
How can I If the driver is listed, the Adaptec SCSI Card 29160LP
driver is loading properly. I tell if the Adaptec SCSI Card 29160LP driver is not listed, reinstall the driver. I If the SCSI Controller icon or the Adaptec SCSI Card 29160LP software driver is loading properly?
1 Right click on the My Computer icon on the Windows desktop.
2 Select ...
User Reference - Page 13
....
7 Note: .The 29160LP will not appear on the Models list when Adaptec is no SCSI Controller icon under Device Manager, or the software driver for the Adaptec SCSI Card 29160LP. 4 Follow the on-screen instructions. If the SCSI Controller icon or the software driver do not appear
1 Double-click the Add New Hardware icon in Control Panel. 2 Select Next to begin installing your new hardware...
User Reference - Page 21
... the Adaptec SCSI Card 29160LP with SCSISelect
SCSISelect Options BIOS Multiple LUN Support 2 Include in BIOS Scan 2
Available Settings Yes, No Yes, No
Default Setting No (Disabled) Yes (Enabled)
Advanced Configuration Options:
Reset SCSI Bus at IC Initialization Enabled, Disabled Enabled
Display Messages during BIOS Initialization
Enabled, Disabled Enabled
Extended BIOS Translation...
User Reference - Page 23
...that you do not change this setting enabled unless any SCSI device connected to boot from on the SCSI bus. This setting is not valid unless Multiple LUN Support is not Ultra160, select the transfer rate of 160 MBytes/sec. Configuring the Adaptec SCSI Card 29160LP with SCSISelect
SCSI Bus Interface Definitions
I Host Adapter SCSI ID-(Default: 7) Sets the SCSI ID for each connected...
User Reference - Page 26
... detected. I Host Adapter BIOS (Configuration Utility Reserves BIOS Space)-(Default: Enabled) Enables or disables the SCSI card BIOS. Adaptec SCSI Card 29160LP User's Reference
I Boot Only-Only the removable-media drive designated as the boot device is treated as a hard disk drive. Options are controlled by default.)
I Leave this option set Support Removable Disks Under BIOS as Fixed...
User Reference - Page 27
... a specific ID and device, then press Enter. 3 A small menu appears, displaying the options Format Disk and Verify Disk Media. I Verify Disk Media-Allows you to reassign them;
if you to perform a low-level format on the media, it has started. Configuring the Adaptec SCSI Card 29160LP with SCSISelect
I BIOS Support for Int 13h Extensions-(Default: Enabled) When set to...
Adaptec 29160LP Reviews
We have not received any reviews for Adaptec yet.