Singer 6699 I STARLET Support Question
Singer 6699 I STARLET Support Question
Find answers below for this question about Singer 6699 I STARLET.Need a Singer 6699 I STARLET manual? We have 1 online manual for this item!
Question posted by Jerrybryant12 on February 17th, 2023
Singer 6699 Hand Wheel Is Frozen
I removed all covers. The drive shaft wont' turn.
Current Answers
Answer #1: Posted by Asadbekboy on February 17th, 2023 6:42 PM
Asadbekboy
Member since:
February 8th, 2023 Points: 35,090
Member since:
February 8th, 2023 Points: 35,090
If you have removed all the covers of your Singer 6699 I STARLET and the hand wheel is still frozen and the drive shaft won't turn, there could be a few possible causes:
- Thread Jam: Check the thread path for any jammed threads that might be causing the machine to seize up. Remove any tangled threads from the bobbin area, needle area, and other parts of the machine. This can happen if the thread is not threaded correctly or if the thread tension is not adjusted properly.
- Clutch Disengaged: Check to see if the clutch is disengaged. The clutch is the mechanism that connects the hand wheel to the machine's motor. Make sure the clutch is engaged by pushing in the hand wheel or tightening the clutch knob.
- Belt Slippage: The belt that connects the hand wheel to the motor may be slipping or broken. Inspect the belt for any wear or damage. If the belt is damaged, you will need to replace it.
- Internal Gears: If none of the above solutions work, the problem may be internal to the machine's gears. This can be a more complicated repair and may require professional servicing.
If you are not comfortable with troubleshooting the issue or if none of the above solutions work, it is recommended that you take your machine to a certified Singer repair center for further examination and repair.
Asadbek
Answer #2: Posted by SonuKumar on February 17th, 2023 9:04 PM
SonuKumar
Member since:
May 9th, 2021 Points: 16,633,680
Member since:
May 9th, 2021 Points: 16,633,680
https://www.youtube.com/watch?v=-_nFK_nZoU4
Why is my sewing machine handwheel stuck?
Turn the handwheel toward you once again to see if it is locked. Sometimes the bobbin case can be out of place and will not allow the handwheel to turn. If you broke a needle and it fell into the shuttle area, it can also cause the handwheel to jam up.
Please respond to my effort to provide you with the best possible solution by using the "Acceptable Solution" and/or the "Helpful" buttons when the answer has proven to be helpful.
Regards,
Sonu
Your search handyman for all e-support needs!!
Related Singer 6699 I STARLET Manual Pages
Instruction Manual - Page 2
... insert any object into water. "Switch off („0") position, then remove plug from
outlet." 11. "Do not unplug by the manufacturer as a toy. "Never sew with a damaged needle plate as described in this manual. "Read all instructions before cleaning." Always
unplug this sewing machine from the accumulation of electric shock:"
1. "This appliance is being...
Instruction Manual - Page 3
"Always unplug sewing machine from the electrical outlet when removing covers, lubricating, or when making any adjustments in doubt please contact your retailer for household use, or equivalent."
If in the
needle area, such as threading needle, changing needle, threading bobbin, or changing presser foot, etc." 18. "To avoid electrical shock never put the machine nor...
Instruction Manual - Page 8
... stitch width and length
6. 6699/6680 ONLY ACCESSORIES Roller foot, Invisible zipper foot ------- 66-67 Button sewing foot 68 Blind stitch foot 69 Overcasting foot 70
For European version
Dimensions: 425 mm × 211 mm × 329 mm Mass of stitch length and width 32-35
5. KNOWING YOUR SEWING MACHINE Multi-stitch zigzag,
0DFKLQH...
Instruction Manual - Page 11
...
4
6. Removable extension table
/ Accessory box
5
7. Cord socket ,GHQWL¿FDWLRQSODWH
13
17. Large extension table(Optional) 23 33. PRINCIPALES PARTES DE LA MAQUINA
MACHINE IDENTIFICATION
1
1. Bobbin winding tension disk
2
2. Thread take-up
3. Buttonhole lever
14
19. Presser foot screw
24. Thread tension control
3
4. Bobbin winder shaft
8. Hand wheel
12
14...
Instruction Manual - Page 24
.../80
orange band
2045 yellow shank
14/90 blue band
16/100
purple band
* For best sewing results, always use the same size and type of thread in the bobbin as examples of weight...FRWWRQOLQHQVLONZRROV\QWKHWLF rayon, blends.
NEEDLE, THREAD AND FABRIC CHART
Your fabric will use a SINGER branded needle. TABLEAU DES TISSUS, DU FIL ET DES AIGUILLES
Le choix d'une aiguille et du fil ...
Instruction Manual - Page 60
... foot.
Push the reverse stitch switch to create larger buttonholes.
* Carefully mark the buttonhole length on your garment. Start the machine to form first bartack and left side of the buttonhole. Sew second bartack and stitch backward until needle reaches beginning of buttonhole
2
mark to the end of buttonhole.
3. Stitch forward to...
Instruction Manual - Page 65
...thread breaks. * Machine is not threaded correctly (see page 18 - 19). * Top thread tension is bent. - Remove lint (see page 60 - 61). Lower buttonhole lever. * Bobbin winder is turned off.
- ... 22 - 23). Lengthen stitch length. Replace needle (see page 24). * Machine is not raised when sewing stitch patterns.
- Fabric puckers. * Top thread tension is too short
- Lower ...
Instruction Manual - Page 68
...200;LE 6699/6680 6.6699/6680 ACCESORIOS INCLUIDOS
ROLLER FOOT
When sewing leather,...at the top of skirts and dresses. Remove the Invisible Zipper Foot and replace
it ...zipper with the left -hand side of the seam.
5. Close the zipper. 9. Sew a 5/8'' seam all the...Sew from top to bottom of the seam as far as possible, backstitching at the beginning and end of the project.
6.
Machine...
Similar Questions
I Am Having Problems With The Buttonholes.
I just tried it and it does part of one side, then skips to the other side. Please help! I am gettin...
I just tried it and it does part of one side, then skips to the other side. Please help! I am gettin...
(Posted by karlamclellan 8 years ago)
Walking Foot
please can you tell me if a walking foot can be used on this machine. im thinking of upgrading and d...
please can you tell me if a walking foot can be used on this machine. im thinking of upgrading and d...
(Posted by ashboxannie 9 years ago)
Can This Machine Be Installed In A Sewing Table(cabinet)?
(Posted by beagle82491 9 years ago)
Singer Sew Mate Sewing Machine Where Is The Bobbin Access Cover
(Posted by jfbsus 9 years ago)
Hand Wheel On New Machine Will Not Turn (stuck) New Machine Has Not Been Used.
(Posted by robinmyoung 10 years ago)