Home » Singer » Sewing Machines » Singer 1004 VIVO

Singer 1004 VIVO Support Question

Find answers below for this question about Singer 1004 VIVO.
Need a Singer 1004 VIVO manual? We have 1 online manual for this item!

Singer Overview Questions Manuals Reviews Videos Research

Question posted by shadowrainboe on January 29th, 2022

Power Cords No Longer Fitting

The power cords shown in these images apparently used to work with this machine, but when I use them they do not fit, why?

I Know the Answer!

I have the same question
Request More Information

Current Answers

Answer #1: Posted by SonuKumar on January 30th, 2022 7:23 AM

This answer was accepted by the poster of the original question.

SonuKumar

Member since:
May 9th, 2021

Points: 16,598,000

1,100
points

https://www.manualslib.com/manual/587279/Singer-Vivo-1004.html

Please respond to my effort to provide you with the best possible solution by using the "Acceptable Solution" and/or the "Helpful" buttons when the answer has proven to be helpful.

Regards,
Sonu
Your search handyman for all e-support needs!!

Related Singer 1004 VIVO Manual Pages

Instruction Manual - Page 1

... upper tension correctly. Next, check that you are sewing. VivoTM - 1004 INSTRUCTION MANUAL Thread looping under my fabric? Now lower...machine. 1.Place the thread spool on the top of this easy test to take the thread and take the thread and follow the threading guides/graphics on the spool pin and secure with a thread spool cap. 2.While holding the thread with your right hand, use...

Instruction Manual - Page 2

... sound pressure level under normal operation conditions is required around the sewing machine needle. 9. Turn off when making any opening. 15. If the power supply cord is not working properly, if it to break. 12. IMPORTANT SAFETY INSTRUCTIONS This machine is not intended for household use by the manufacturer as described in the instruction manual. 14. The...

Instruction Manual - Page 3

...Bed 9 Connecting Machine to Power Source 10 ...Sewing/Cutting the Thread 20 Zig-Zag Stitching...21 Blind Hem Stitching 22 Multi Zig-Zag Stitching 23 Darning Plate...24 Changing the Bulb...25 Maintenance...25 Troubleshooting...26 NAME OF PARTS PRINCIPAL PARTS OF THE MACHINE (Machine Front View) 1. Needle plate 3 7. Presser bar 15. Feed dogs 15 18. Thread take-up lever 3. Power...

Instruction Manual - Page 4

Power cord socket 29 26. Power cord 28 27. Bobbin PRINCIPAL PARTS AND WHAT THEY DO 1. Release it possible to sew smaller, more hard-to the left of tension on the needle thread. Use the presser foot lifter to lower the presser foot to sew or to raise the presser foot to hold in sewing light 26 30. Removable...

Instruction Manual - Page 5

... or plastic bobbins, though they may seem to unwind without tug or drag. Using metal bobbins will be used . 21. Spool Pin holds the thread spool. The spool pin holder fits onto the spool pin to allow the machine to sew. 29. Power Cord has one end that is raised before beginning to function properly, and the...

Instruction Manual - Page 6

CONNECTING MACHINE TO POWER SOURCE Connect the machine to a power source, as shown. If it still does not fit, contact a qualified electrician to install the proper outlet. To turn the machine on the foot controller. When the machine is threaded and ready to sew, lower the presser foot and step on to sew, use . It is equipped with an electric plug that...

Instruction Manual - Page 7

...the number is, the larger the needle is . Ball point needles are designed for use the correct style and size of needle to use with the flat side toward the back, as far up as spandex, t-shirt ...The style number for best results. To insert a new needle, first turn the Power On/Off & Speed Control Switch to remove work from the machine when sewing is located inside the "C" area of the...

Instruction Manual - Page 8

...is used, correct tension for more information, or visit www.singer.com. Therefore, do not use metal bobbins. REMOVING / ATTACHING THE PRESSER FOOT Turn the Power On/... tension guide, as shown. Step on the bobbin thread. Removing the Presser Foot Raise the Presser Bar by SINGER®uses metal bobbins.The bobbin...Vivo create & repair machine by lifting the Presser Foot Lifter.

Instruction Manual - Page 9

... Power On/Off & Speed Control Switch to sew. Raise the presser foot lifter, which will be done correctly in a counter-clockwise direction. If the thread spool is very important. Note: This step is smaller in size, the spool pin can remain in the order shown: 1.Guide the thread through the eye of the machine...

Instruction Manual - Page 10

... the dial directly correspond to the display on the side of the machine, as shown. 18 Raise the presser foot lifter. Replace the bobbin cover plate. (1) (2) (3) (4) (5) (6) (7) (8) 17 STRAIGHT STITCHING The straight stitch is used stitch for all types of sewing. 1.To begin sewing, first raise the presser foot lifter. 2.Pull both the top and bobbin...

Instruction Manual - Page 11

...the machine for straight stitch sewing, depending on the fabric. Pull down until you sew 3 stitches in the bobbin. THREAD TENSION Having selected the correct needle and thread combination for the fabric being used,... remove the work from 1 through the machine to lock the threads at 1. Bring it while you come to sew, slowly turn the tension dial from the machine. The purpose...

Instruction Manual - Page 12

...shown. 2.Place the fabric under the blind hem presser foot with the fold of the fabric positioned so that the right swing of the stitch falls off the outer edge of the appliqué, enclosing the raw edge of the fabric. Thread the top of the machine...(such as top stitching thread) will be used for seam finishing, appliqué work or decorative sewing. Draw the Appliqué shape, then ...

Instruction Manual - Page 13

...feed through. DARNING PLATE For some sewing techniques such as shown. Position the fabric and button under the presser foot. Note: It may be used. Set the machine for the button, sew 10 stitches. If repairing a ...and the garment. Sewing on a Button Set the machine for the needle on top of the button and sew over the top of it clears the holes of the button. Working from the torn ...

Instruction Manual - Page 14

... 1-(1) LED Φ5MM DC3V 0.6W - +- + + 1-(2) 2 3 4 MAINTENANCE 1.Wipe the machine with clean cloth. 2.Remove bobbin cover and take out the bobbin, place the bobbin cover back after cleaning with ...a small brush. 3.Keep the machine away from the main socket. CHANGING THE BULB Disconnect the machine from the power supply be removing the plug from high temperatures. 4....